Barco Projector Toolset For Hdx Series Reference Guide

3. Menus
3.8.1 About snapshots
Overview
At any moment the settings for a configuration can be saved in a snapshotfile. This snapshotfile can be
loaded again to create the same situation as when the snapshot was taken.
A snapshot can contain:
• All settings
• All layout settings
• All input settings
• Lamp settings
• Projector settings
Snapshot
A snapshot is a collection of settings at a given point of time for a configuration
3.8.2 Managing snapshots
Overview
When opening the snapshot window an overview of...

3. Menus
Image 3-10
Snapshot view
3.8.3 Take a snapshot
What can be done?
As a snapshot is collection of setting at a certain point in time, a snapshot of the current configuration can
be taken at any moment.
How to take
1. Click on the snapshot icon on the manage button bar (a). (image 3-11)
TheSnapshot managementdialog box opens (b).
2. Click theTake a snapshoticon (c).
TheTake a snapshotdialog box opens (d).
3. To change the proposed snapshot name, click in the inputfield next toSnapshot name, select...

3. Menus
The following levels are available:
- All settings
- All layout settings: only layout settings are saved
- All input settings: only input settings are saved
- Lamp settings: only lamp settings are saved
- Projector settings: only projector settings are saved
This is afirstfiltering level and can be followed by a device selection.
6. Select the device. By default all devices are selected (h).
Within the setup snapshot level it is possible to exclude some devices by un-checking that device in
Select...

3. Menus
3.8.4 Apply a snapshot
What can be done?
A snapshot can be fully or partially apply to the current configuration.
When there is no warning symbol in front of the snapshot name, this snapshot can be fully applied to the
current configuration.
When there is a warning symbol in front of the snapshot name, that means that the current configuration
is not the same as those when the snapshot was made, than only the matching parts will be applied to the
current configuration. To see which items do not...

3. Menus
Image 3-12
Apply snapshot
3.8.5 Delete a snapshot
How to delete
1. Click on the snapshot icon on the manage button bar (a). (image 3-13)
TheSnapshot managementdialog box opens with all available snapshots (b).
2. Click on the snapshot to delete (c).
The name becomes yellow.
3. Click on the delete icon (d).
Aconfirmation dialog box is displayed (e).
4. ClickYe sto delete (f).
R5905073 PROJECTOR TOOLSET 07/06/2011
31 

3. Menus
Image 3-13
Delete snapshot
3.8.6 Add shot cut key to a snapshot
What can be done?
To each snapshot a key stroke can be associated so that it can be used as short cut key. This short cut
key can be activated at any time. Depending on the apply settings, the snapshot will be loaded without
any notice or will be loaded after asking for confirmation. Once the snapshot is loaded, the statuses will
be refreshed.
Howtocreateashortcutkey
1. Click on the snapshot icon on the manage button bar (a) (image...

3. Menus
6. ClickOKto save the new short cut status (h).
Image 3-14
Associate short cut to snapshot
3.8.7 Remove shot cut key association
How to remove a short cut
1. Click on the snapshot icon on the manage button bar (a) (image 3-15)
TheSnapshot managementdialog box opens with all available snapshots (b).
2. Click on the key bindings icon (c).
TheSnapshot trigger keybindingdialog box opens (d).
3. To clear the key for a specific snapshot, select that snapshot (e) and clickClear(f1).
To clear all short...

3. Menus
Image 3-15
Clear short cut on snapshot
34R5905073 PROJECTOR TOOLSET 07/06/2011 

4. Preferences
4. PREFERENCES
Overview
• Introduction
• Start up the preferences
• Access level
• Software Appearance
• Bug report setup
• Logging
• Workspace selection
4.1 Introduction
Overview
Preferences determine the default behavior of the software. Some preferences can be generally set for
the complete software, some others are only for the different plug-in modules.
4.2 Start up the preferences
How to start up ?
1. Click onFileon the menu bar. (image 4-1)
Thefile menu opens.
2....

4. Preferences
Image 4-2
Preference window
4.3 Access level
What can be done ?
Some actions and functions of the Projector Toolset are restricted to certain access levels. In this panel
you can check the access level and read information from a dongle, if you have one.
A dongle is not required to use the normal functions in Projector Toolset.
When using Projector Toolset without dongle, or as operator, the maintenance function in the Service
module has the same content as the maintenance button in the...