Barco Projector Toolset For Hdx Series Reference Guide

4. Preferences
4 different levels are defined:
• operator level
• service technician level
• theatre technician level
• Barco technician level
Each level can access specific functions in the service module. Only the operator level functions are
described in this manual.
4.4 Software Appearance
What can be changed ?
The following items can be changed:
• Language of the software.
• Look and feel of the software.
Language selection
1. Click onAppearance(image 4-2).
The appearance window opens....

4. Preferences
The possible look and feels will be displayed.
The following are possible:
- Windows
-Java
-Nimrod
-TinyLAF
Nimrod and Tiny LAF are collections of look and feels. If one of both are selected, the second line
becomes available to select a typical look andfile out of the collection. (image 4-6)
An info window will be displayed to announce that the look and feel change will take place after restarting
the software.
Image 4-5
Look and feel software
Image 4-6
Look and feel software for...

4. Preferences
2. Check the check box in front of Use specific font. (image 4-7)
The drop down menu becomes available.
3. Click on the drop down box and select the desired font.
4. Click onApplyto confirm the selection.
An info window will be displayed to announce that the look and feel change will take place after restarting
the software.
Image 4-7
Use of specific font
4.5 Bug report setup
SMTP
SMTP (Simple Mail Transfer Protocol) is a TCP/IP protocol used in sending E-mail.
Setup bug report
1. Click onBug...

4. Preferences
The following settings should be entered :
- Your E-mail address
- Organization
- Barco’s E-mail address, automaticallyfilled out when installing the software.
5. If you want to receive a copy of the bug report E-mail to Barco, check this check box.
6. Fill out the address of the SMTP mail server.
Tip:Contact your system administrator in your organization to obtain the correct address.
7. Fill out the port of the mail server. Your system administrator can help you. The port is default set...

4. Preferences
Image 4-10
Mail setup window
4.6 Logging
Start up
1. Click onLogging.
The logging preferences window opens. (image 4-11)
Image 4-11
Logging and debugging preferences
Logging level
Click on the slider bar to set the desired logging level.
The following levels are possible:
• Debug
•Info
• Error
• Warning
•Fatal
Message to logfile
The logging about the behavior of the program can be logged in afile. Each time the program is started a
new logfile is created. Thefile is saved in a...

4. Preferences
The logging level can be set to limit the number of data. By default,Infolevel is setup. Other levels are
Debug,Warning,ErrorandFatal.
Check the check box in front ofWrite log messages tofileif you want to activate the logging. This is a
preferred setting.
The period a logging must be saved on disk can be set. Default set to 20 days. All logging older than 20
days will be removed.
When the period is set to “0”, only the last created logging will remain on the disk.
To clear the complete...

4. Preferences
Image 4-13
Selecting a workspace
R5905073 PROJECTOR TOOLSET 07/06/201143 

4. Preferences
44R5905073 PROJECTOR TOOLSET 07/06/2011 

5. Configurator
5. CONFIGURATOR
Overview
• Introduction
•Configurator window
• Create a new configuration
• Adddevicetoaconfiguration via scanning
• Add projector to a configuration
• Reconnect a projector
• Edit projector properties
•Configuration preview
•Configuration properties
• Preview layout properties
5.1 Introduction
Overview
The configurator makes it possible to create configurations and to change the settings of each device
separately.
Start up
To start up the configurator, just click on the...

5. Configurator
Or,
pressCtrl+N.
TheNew configurationdialog box opens (b).
2. Fill out a name for the new configuration next toConfigurationname. The default name will beConfig-
uration_’digit’(c).
Note:Only the characters a to z, A to Z, 1 to 9 and (, ), _, -, @ or allowed in a name.
When it is thefirst configuration for this workspace, only the optionCreate by adding projectorsis avail-
able.
When there are already configuration available, the optionBasedonavailableconfigurationbecomes
available
3. Check the...