Barco Projector Toolset For Hdx Series Reference Guide

8. Configurator, Projector adjustment settings
Image 8-10
Input mode selection
Possible results
Input
moduleIndication Description
RGB Auto detect RGB input, the projector detects automatically the correct type.
YUV Auto detect YUV input, the projector detects automatically the correct type.
CVBS/S-Video Auto
detectComposite video or S-Video, the projector detects automatically
the correct type.
RGB HS/VS - CS RGB input with separate horizontal and vertical sync or separate
composite sync.
RGB CV RGB...

8. Configurator, Projector adjustment settings
8.5 Status PiP window
To toggle the status via the properties
1. Select the PiP window. (image 8-11)
The border of the window changes to white.
2. When the selected PiP window is visible, to make this window not visible, uncheck the check boxVisible
next toStatus.
When the selected PiP window in not visible, to make this window visible, check the check boxVisible
next toStatus.
When a window is not visible, the outline of the window remains visible in the...

8. Configurator, Projector adjustment settings
Image 8-12
8.6 Inputfiles
Overview
• Introduction
• Loading afitting inputfile
•Loadafile from allfiles
• Edit Input settings
• Save changes on an inputfile
• Rename the current inputfile
• Deleting an inputfile
• Aspect ratio for selected input
• Input balance
• Input color temperature
8.6.1 Introduction
Aboutfiles
Beforeanewsourcecanbeused,acorrectfile has to installed. The projector’s memory contains a list of
files corresponding to the most used sources. When the...

8. Configurator, Projector adjustment settings
8.6.2 Loading afitting inputfile
Load via Load icon
1. Selectfirst a window.
2. Click on Selectfile icon (a). (image 8-13)
TheLoad(fit) dialog box opens (b).
Only the bestfittingfiles are displayed. Files with a digit between brackets are custom sourcefiles. All
others are standard sourcefiles.
3. Select afile from the list (c).
4. ClickOpenorSelectto load the selectedfile (d).
When a standardfile is selected or a not exactly matching customfile, Projector Toolset will...

8. Configurator, Projector adjustment settings
6. ClickOKto create a new custom sourcefile. IfCancelis pressed the previous selectedfile is loaded
again.
The new createdfilecanbeedited.
Image 8-14
Loadfittingfile
8.6.3 Load afile from allfiles
What is possible?
Afile can be loaded from the complete list of allfiles.
How to load
1. Selectfirst a window.
2. Click onAdjust(a). (image 8-15)
TheInputdialog box is displayed (b).
3. ClickFileand selectLoad (ALL)(c).
A list of allfilesisdisplayedinLoad (All)dialog box...

8. Configurator, Projector adjustment settings
Image 8-15
8.6.4 Edit Input settings
Adjustable items
•Total horizontal pixels: total horizontal pixels in the source. If the value is wrong, sampling mistakes
(small vertical bars in the projected image) will be seen in the image.
•Active horizontal pixels: determine the width of the window on the screen. This value is normally given
inthesourcespecifications. If not, adjust until full image height is displayed (no missing lines).
•Horizontal start in...

8. Configurator, Projector adjustment settings
Image 8-16
Once a value or a setting is changed thefile name next toActive inputfilegets an as-
terisk to indicate that thefile is not saved yet.
When closing theInputdialog box, Projector Toolset asks to save the changes.
8.6.5 Save changes on an inputfile
What can be done?
Once a loadedfile is changed, the settings can be save in the samefile.
When changes are made in theInputdialog box and when closing this box withoutfirst saving, the software
asks to save the...

8. Configurator, Projector adjustment settings
TheInputdialog box is displayed.
2. Click onFileand selectSave.
The settings are saved in the samefile on the projector.
Image 8-17
When closing theInputdialog box, Projector Toolset asks to save the changes.
8.6.6 Rename the current inputfile
What can be done?
The current inputfilecanberename.
Not possible to rename the activefile (current loadedfile).
How to rename, way 1
1. Click on the rename icon on the Input settings pane (a). (image 8-18)
TheRename...

8. Configurator, Projector adjustment settings
Image 8-18
Rename sourcefile via icon
How to rename, way 2
1. Click onAdjust(a). (image 8-19)
TheInputdialog box opens (b).
2. Click onFileand selectRename(c).
TheRename inputdialog box opens (d).
3. Select thefile to rename from the list (e) and clickRename(f).
AnInputdialog box opens. The current name isfilled out (g).
4. Select the current name (h) and enter a new name.
Note:Only the characters a to z, A to Z, 1 to 9 and (, ), _, -, @ or allowed in a name....

8. Configurator, Projector adjustment settings
Image 8-19
Rename via input settings
8.6.7 Deleting an inputfile
What is possible?
Any custom inputfile can be delete. It is not possible to delete standardfiles.
Not possible to delete the activefile (current loadedfile).
How to delete, way 1
1. Click on the delete icon on theInput settingspane (a). (image 8-20)
TheDelete inputdialog box opens (b).
2. Select thefile to delete from the list (c) and clickDelete(d).
AQuestiondialog box opens to ask if you are sure...