Barco Projector Toolset For Hdx Series Reference Guide

8. Configurator, Projector adjustment settings
Image 8-32
Select a specific color temperature
A Custom color temperature
WhenCustomis selected,
1. Click on the slider of Red and/or Blue until the desired color temperature is reached (image 8-33)
Or,
click on the up down control of the spin box of Red and/or Blue until the desired color temperature is
reached
Or,
click in the inputfield of the spin box of Red and/or Blue and enter the desired value.
Image 8-33
Custom input color temperature
R5905073...

8. Configurator, Projector adjustment settings
8.7 Image settings
Overview
The following image settings can be adjusted depending on the source type:
• Contrast
• Brightness
• Saturation
•Phase
• Sharpness
• Noise reduction
•Tint
When a setting is not adjustable, this setting is grayed out.
Image settings are done for the current active window only and must be repeated for
other windows.
Access to the Image properties
1. Select a window (input).
2. Click onAdjust(a).
TheInputdialog box opens (b)....

8. Configurator, Projector adjustment settings
8.8 Layout settings
Overview
• General introduction
•Loadalayout
• Show window border
• Re-size a layout window
• Move a layout window
• Aspect ratio output window
• Lock a input window
• Set input window to full size
• Save a layout
• Layout Save as
• Rename a layout
• Delete a layout
• Edit window texture
8.8.1 General introduction
Overview
With the projector, it is possible to display two sources, one as main window and the other as PiP window.
The window...

8. Configurator, Projector adjustment settings
Image 8-34
Load layout
8.8.3 Show window border
What can be done?
The border of the layout window can be displayed on the screen.
How to show
1. Check the check box in front ofShow window border. (image 8-35)
The window border of the layout window is displayed on the screen. There can be a difference between
the displayed border and the displayed image due to possible differences in aspect ratio.
Image 8-35
Show window border
8.8.4 Re-size a layout window...

8. Configurator, Projector adjustment settings
The window border becomes white and 6 re-size points are added. The cursor becomes a 4 arrow
cursor.
2. Move the cursor to one of the re-size points.
The cursor becomes a 2 arrow cursor.
3. Click and drag the selected point to the desired position.
When a corner point is selected, re-sizing in horizontal and vertical direction is possible.
When a center side point is selected, only re-sizing in horizontal or vertical direction is possible.
While re-sizing,...

8. Configurator, Projector adjustment settings
Move via the coordinates
1. Select the window you want to move. (image 8-39)
2. Change theTo pandLeftvalue indicating the current start position of the window. Click on the up down
control of the spin box until the desired value is reached
Or,
click inside the inputfield of the spin box and enter the desired value with the keyboard.
Image 8-39
Move window via coordinates
8.8.6 Aspect ratio output window
Aspect ratio
Relation between the horizontal & vertical...

8. Configurator, Projector adjustment settings
Image 8-40
Aspect ratio locking
The input window is represented by white dotted area.
When re-sizing the output window, the input will move are re-scale in the same way.
When custom is selected
1. Set up the custom aspect ratio by changing X and Y until the desired ratio is obtained.
Note:To return to the input aspect ratio, click onTo input aspect ratio.
2. ClickOKto accept.
8.8.7 Lock a input window
Why ?
A window (input) can be locked so that no changes...

8. Configurator, Projector adjustment settings
8.8.8 Set input window to full size
Aspect ratio will be unlocked.
Via the context menu
1. Right click on the window. (image 8-42)
A context menu appears.
2. SelectFull size.
The selected window jumps to full size independent its aspect ratio setting.
Image 8-42
Set window to full size
Via the layout settings
1. Select the window to re-size. (image 8-43)
2. Click on the full size icon.
The selected window jumps to full size independent its aspect ratio...

8. Configurator, Projector adjustment settings
How to save
1. Click on the save icon on theLayout settingspane (image 8-44)
The current layout is saved
Image 8-44
Save layout
8.8.10 Layout Save as
A ’save as’ is executed on the projector.
How to ’save as’
1. Click on the ’save as’ icon on theLayout settingspane. (image 8-45)
TheThe Save layout asdialog box opens.
2.Ifyouwanttosaveonanexistingfile name, select afile from the list.
If you want to save on a new name, click in the inputfield next to Save as and...

8. Configurator, Projector adjustment settings
Image 8-45
Save-as layout
8.8.11 Rename a layout
What can be done?
Any custom layoutfile can be renamed. Standard layoutfile cannot be renamed.
Renaming the current active layoutfile is not possible.
How to rename
1. Click on the rename icon in theLayout settingspane. (image 8-46)
TheRename layoutdialog box opens.
2. Select thefile to rename from the list and clickRename.
TheRenamedialog box opens.
3. Click in the inputfield and select the current name.
4. Enter...