Barco Projector Toolset For Hdx Series Reference Guide

9. Configurator, Color alignment
Image 9-3
Native coordinates
9.3 Custom color space set up
Setup via coordinates
1. SelectfirstCustomcolor space.
2. Click on theTa r g e ttab. (image 9-4)
The coordinates become available.
3. To change the coordinate values for a color, click on the up down control of the spin box of the corre-
sponding color until the selected color has the desired coordinates.
Or,
click in the input box of the spin box and enter the desired value.
The corresponding color point on the...

9. Configurator, Color alignment
Image 9-5
Adjustment via color gamut
Note that it is common practice to set the targets outside the projector color space. This
implies there would be clipping if a fully saturated input was applied. In normal scenes,
this does not happen, and the extra gain or saturation helps balance the overall lock.
If clipping occurs, there will typically be a hue shift when one of R, G, B goes into clip
ahead of the others.
9.4 White point adjustment
9.4.1 Start up
How to start up...

9. Configurator, Color alignment
9.4.2 Free white point adjustment
UncheckUse color temp. traject. The white point can be moved to any location (f).
Setup via the coordinates
1. SelectfirstCustomcolor space. (image 9-6)
2. Click on the up down control of the spin box ofWhiteuntil the desired coordinates are reached.
Or,
click in the inputfield of the spin boxes and enter the desired value for White.
The white point can be moved to any value.
Image 9-6
Custom white point adjustment
Setup via the color...

9. Configurator, Color alignment
Image 9-7
Custom white point adjustment via the gamut
9.4.3 White point adjustment using color temperature traject
CheckUse color temp. traject. Only color values on the D-illuminance curve are allowed
(f).
How to adjust via the menu
1. Click on drop down box of the temperature pane (g). (image 9-8)
The possible values open.
2. Select the desired value.
The following values are possible:
- 3200
- 4900
- 5400
- 6500
- 7500
- 9300
-Custom
160
R5905073 PROJECTOR TOOLSET...

9. Configurator, Color alignment
3. WhenCustomis selected, the slider can be moved to any position so that any value can be reached
along the temperature curve (D-illuminance curve).
Image 9-8
Select afixed color temperature
How to adjust via color gamut
1. Click on the white point in the color gamut representation. (image 9-9)
2. Hold down the mouse button and drag the white point along the D-illuminance curve until the desired
white point is reached.
The combo box indicatesCustom.
R5905073 PROJECTOR...

9. Configurator, Color alignment
Image 9-9
Custom white adjustment via curve
9.5 Save custom settings
What has to be done?
When creating a custom color space with custom white point, the custom indication next toActive standard
gets an asterisk (*) to indicate that the values are not yet saved.
How to save?
1. Click on the Save icon () next toActive standard.
The current values are saved as custom setting.
9.6 Preview set up of the color diagram
How to set up
1. Click on theViewtab. (image 9-10)
The...

9. Configurator, Color alignment
Image 9-10
Diagram preview set up
R5905073 PROJECTOR TOOLSET 07/06/2011163 

9. Configurator, Color alignment
164R5905073 PROJECTOR TOOLSET 07/06/2011 

10. Installation Settings
10. INSTALLATION SETTINGS
Overview
• Image orientation
• Lamp settings
10.1 Image orientation
The different configurations
The following installation are possible:
• front/table
• front/ceiling
• rear/table
• rear/ceiling
• auto front : automatic front, projector detects itself if it is ceiling or table mounted and projects always
a readable image.
• auto rear : automatic rear, projector detects itself if it is ceiling or table mounted and projects always
a readable image.
Font :...

10. Installation Settings
Indicates the status of the lamp.
Lamp on Image projection possible
Lamp offImage projection not possible
Image 10-2
Lamp settings
Serial number
Serial number of the current installed lamp.
Nominal power
Nominal power that can be fed to the lamp.
Actual power
Current power fed to the lamp.
Article number
Article number of the current installed lamp
Lamp power mode
1. Click on the drop down box and select the desired power mode.
166
R5905073 PROJECTOR TOOLSET 07/06/2011