Barco Projector Toolset For Hdx Series Reference Guide

12. Warping
Image 12-25
Increase active nodes
How to decrease
1. Click on the decreasing node icon to decrease the number of active nodes. (image 12-26)
Image 12-26
Decrease active nodes
12.7.4 Make node selection
Selecting a single node
1. Click on a node in the grid. (image 12-27)
An active area is created around that single node. This active area is created by connecting the adjacent
active nodes with each other. That is also the area that will be influenced by an adjustment of the
selected active...

12. Warping
Image 12-28
Multi node selection
Selecting all nodes in a row/column
1. First select a single node.
An active area is set and the background becomes yellow.
2. Right click on a grid to open the context menu. (image 12-29)
3. SelectMultiSelectand move the cursor to the right.
4. SelectToggle row multiSelectand/orToggle column multiSelectdepending on what you want to do.
The row and/of column with thefirst selected node is completely selected. All symbol of all other nodes
on that line becomes...

12. Warping
Image 12-29
All nodes on a row selected
Multi deselect
1. While multiple active nodes are selected, right click in the grid. (image 12-30)
The context menu opens.
2. SelectMultiSelectand move the cursor to the right.
3. SelectMulti deselect.
All selected active nodes are deselected except the current selected active node.
R5905073 PROJECTOR TOOLSET 07/06/2011
199 

12. Warping
Image 12-30
Multi deselect
12.7.5 Change selection to new active node
What can be done ?
The selection, active node and the active area, can be move to another active node.
Viathemouseclickinthegrid
1. While an active node is selected, just click on another active node to select this node.
The active area jumps from the previous selected active node to the new selected active node.
Via the Floater menu
1. While an active node is selected, click on the arrow keys on the Floater menu to move...

12. Warping
The position of all the other nodes in the active area is recalculated with regard to the new position of
the active node. (image 12-32)
As long as the dots remain green, the warping board can execute this new position. The coordinates
and the status icon of the selected active node are also green;
When the dots become orange, a possible problem can occur on the warping board. The coordinates
values change also to orange and the status icon goes to the error state.
When the dots become red,...

12. Warping
12.7.8 Move a hard edge line
What can be done ?
An inserted hard edge can be moved to any place on the grid
Move via drag and drop
1. Click on the hard edge line to move and hold down the mouse button. (image 12-34)
2. Drag the line to the desired location and release the mouse button.
Image 12-34
Move hard edge
How to move with the menu or keyboard
1. Select the hard edge to move by clicking on it. (image 12-35)
The line becomes red.
2. Click on the arrow keys in theFloatingmenu until the...

12. Warping
2. Click on the delete icon in theFloatingmenu.
The hard edge is remove.
Image 12-36
12.7.10 Show hard edge in active node mode
What can be done ?
Within the Manipulate nodes mode, hard edges can be made visible as info or can be hidden. When
visible, the hard edges are displayed as a green line.
How to toggle hard edges on or off
1. Right click on the grid. (image 12-37)
The context menu opens.
2. Click onShow hard edges.
When the hard edges are hidden before the click, the hard edges will...

12. Warping
12.7.11 Save configuration tofile
What can be done ?
A warping configurationcanbesavetofile. Thisfile can be reloaded for editing purposes or the saved
file can be uploaded on a device and activated via DMX commands
How to save tofile
1. Click on the Save icon in theFloatermenu (1a). (image 12-38)
Or,
right click on the grid to open the context menu and selectSave configurationfile(1b).
TheSavewindow opens (2). The warpingfiles are normally stored in[Projector Toolset in-
stall...

12. Warping
Howtoloadafile
1. Right click on the grid (image 12-39)
The context menu opens.
2. Click onLoad configurationfile.
AnOpenwindow opens. Thefiles are normally stored in[Projector Toolset install direc-
tory]/warping_configuration.
3. Browse to the desiredfile and click on it to select.
4. ClickOpento load thefile.
Image 12-39
Open configurationfile
12.7.13 Start up cylindrical warping
How to start up
1. Right click on the grid.
The context menu opens.
2. SelectCylindrical warping(1). (image 12-40)
A...

12. Warping
Image 12-40
Cylindrical warping menu
Image 12-41
Cylindrical warping menu
A Type of cylinder
B Indentation. Internal or external projection.
C Gradient. Relative deviation on the cylinder.
D Calculate warp button. Only used for special cases. Recalculation is normally done
automatically.
E Reset grid.
F
Fast preview. Current settings are sent to the device.
GResize and center
12.7.14 Indentation
About indentation
The indentation indicates the way the surface is oriented to the projector....