Barco Projector Toolset For Hdx Series Reference Guide

15. Diagnostics
15.4 Temperatures
Overview
An overview of the current measured values are given.
Image 15-5
Measurements
The different measurements are grouped by Temperature, Fan speed, and Voltages.
An indication is given about the number of errors and warnings.
The symbol in front indicates the status:
• Green means OK, within the limits.
• Yellow means in warning condition.
• Red means in error condition.
The full view is the default view. To see a condensed view, uncheck the check box in front...

15. Diagnostics
228R5905073 PROJECTOR TOOLSET 07/06/2011 

16. Lens calculator
16. LENS CALCULATOR
Overview
• Introduction
• Launching the lens calculator
• Functions of the lens calculator
• Calculate a lens
• Calculate distance
• Calculate screen
16.1 Introduction
Overview
For a typical projector and lens, the distance between the projector and the screen in relation with the
screen width can be calculated.
While launching the lens calculator, the complete Barco lens calculator starts up.
Start up
To start up the Lens calculator module, just click on the lens...

16. Lens calculator
Image 16-1
Start up lens calculator
16.3 Functions of the lens calculator
Calculate lens
Starting from a typical projector type, , the screen width used to project on and the distance between the
projector and the screen,
Starting from :
• a typical projector, selectable in Choose projector
•screenwidth
• distance between projector and screen
a lens can be calculated to be used in the given circumstances.
Calculate distance
Start by selecting a projector and then a lens. Enter the...

16. Lens calculator
Calculate screen
Start by selecting a projector and the a lens. Enter the distance between the projector and the screen.
The minimum and maximum screen width is given in red at the bottom line of the calculation panel.
16.4 Calculate a lens
How to calculate a lens
1. Click on the drop down box belowChoose projectorand select the desired projector. (image 16-2)
The aspect ratio is automaticallyfilled out.
2. Click in the inputfield of screen width and enter the correct value
Or,
click on...

16. Lens calculator
16.5 Calculate distance
How to calculate distance
1. Click on the drop down box belowChoose projectorand select the desired projector. (image 16-3)
2. Click on the drop down box belowChoose lensand select the desired lens.
3. Click in the inputfield of screen width and enter the correct value
Or,
click on the slider and hold down the mouse button and drag the slider until the correct screen width is
reached.
The minimum and maximum distance is given inResult.
Image 16-3
Projector...

16. Lens calculator
Image 16-4
Screen width calculation
R5905073 PROJECTOR TOOLSET 07/06/2011233 

16. Lens calculator
234R5905073 PROJECTOR TOOLSET 07/06/2011 

A. DMX chart
A. DMX CHART
Overview
• DMX chart, Basic
• DMX chart, Full
• DMX chart, Extended
A.1 DMX chart, Basic
Overview
Chan-
nelFunction Value Default Action
0 - 5 Mechanical shutter closed1Intensity
6 - 255255
Electronic contrast on output
2 Function select 0 - 7
No function
8-15
Activate layout 1 (Main full screen) (If held
for 2 seconds)
16 - 23
Activate layout 2 (PiP top right) (If held for 2
seconds)
24 - 31
Activate layout 3 (Split top bottom) (If held
for 2 seconds)
32 - 39
Activate layout 4...

A. DMX chart
A.2 DMX chart, Full
Overview
Chan-
nelFunction Value
DefaultAction
0 - 5 Mechanical shutter closed1 Intensity
6 - 255255
Electronic contrast on output
2 Brightness 0 - 255 128
Adjusts the brightness between 0 and 100% on input
3
Contrast0 - 255 128
Adjust the contrast between 0 and 100% on input
0-87
No function
88 - 95
Input 1 (if held for 2 seconds)
96 - 103
Input 2 (if held for 2 seconds)
104 - 111
Input 3 (if held for 2 seconds)
11 2 - 11 9
Input 4 (if held for 2 seconds)
4 Input...