Barco Projector Toolset For Hdx Series Reference Guide

							9. Configurator, Color alignment
Image 9-3
Native coordinates
9.3 Custom color space set up
Setup via coordinates
1. SelectfirstCustomcolor space.
2. Click on theTa r g e ttab. (image 9-4)
The coordinates become available.
3. To change the coordinate values for a color, click on the up down control of the spin box of the corre-
sponding color until the selected color has the desired coordinates.
Or,
click in the input box of the spin box and enter the desired value.
The corresponding color point on the gamut representation changes in the same way.
Image 9-4
Custom color space adjustment
Setup via the color gamut
1. SelectfirstCustomcolor space.
2. Click on a color point in the color gamut representation. (image 9-5)
3. Hold down the mouse button and drag the selected point to the desired position in the color space.
R5905073 PROJECTOR TOOLSET 07/06/2011
157 
						

							9. Configurator, Color alignment
Image 9-5
Adjustment via color gamut
Note that it is common practice to set the targets outside the projector color space. This
implies there would be clipping if a fully saturated input was applied. In normal scenes,
this does not happen, and the extra gain or saturation helps balance the overall lock.
If clipping occurs, there will typically be a hue shift when one of R, G, B goes into clip
ahead of the others.
9.4 White point adjustment
9.4.1 Start up
How to start up
1. Click on the open icon next toActive standard(a).
2. SelectCustom(c).
158
R5905073 PROJECTOR TOOLSET 07/06/2011 
						

							9. Configurator, Color alignment
9.4.2 Free white point adjustment
UncheckUse color temp. traject. The white point can be moved to any location (f).
Setup via the coordinates
1. SelectfirstCustomcolor space. (image 9-6)
2. Click on the up down control of the spin box ofWhiteuntil the desired coordinates are reached.
Or,
click in the inputfield of the spin boxes and enter the desired value for White.
The white point can be moved to any value.
Image 9-6
Custom white point adjustment
Setup via the color gamut
1. Click the white point in the color gamut representation (g). (image 9-7)
2. Hold down the mouse button and drag the white point to the desired position in the color space.
The white point can be dragged to any value.
R5905073 PROJECTOR TOOLSET 07/06/2011
159 
						

							9. Configurator, Color alignment
Image 9-7
Custom white point adjustment via the gamut
9.4.3 White point adjustment using color temperature traject
CheckUse color temp. traject. Only color values on the D-illuminance curve are allowed
(f).
How to adjust via the menu
1. Click on drop down box of the temperature pane (g). (image 9-8)
The possible values open.
2. Select the desired value.
The following values are possible:
- 3200
- 4900
- 5400
- 6500
- 7500
- 9300
-Custom
160
R5905073 PROJECTOR TOOLSET 07/06/2011 
						

							9. Configurator, Color alignment
3. WhenCustomis selected, the slider can be moved to any position so that any value can be reached
along the temperature curve (D-illuminance curve).
Image 9-8
Select afixed color temperature
How to adjust via color gamut
1. Click on the white point in the color gamut representation. (image 9-9)
2. Hold down the mouse button and drag the white point along the D-illuminance curve until the desired
white point is reached.
The combo box indicatesCustom.
R5905073 PROJECTOR TOOLSET 07/06/2011
161 
						

							9. Configurator, Color alignment
Image 9-9
Custom white adjustment via curve
9.5 Save custom settings
What has to be done?
When creating a custom color space with custom white point, the custom indication next toActive standard
gets an asterisk (*) to indicate that the values are not yet saved.
How to save?
1. Click on the Save icon () next toActive standard.
The current values are saved as custom setting.
9.6 Preview set up of the color diagram
How to set up
1. Click on theViewtab. (image 9-10)
The different selections become visible.
Grid lines Grid lines in the background inside the xy coordinate system.
CIE diagram Representation of the colors within the xy coordinate system. Chromaticity
diagram.
Wavelength values Wavelength values displayed or not around the chromaticity diagram.
Global region Color gamut, maximum colors which can be reproduced by the wall
162
R5905073 PROJECTOR TOOLSET 07/06/2011 
						

							9. Configurator, Color alignment
Image 9-10
Diagram preview set up
R5905073 PROJECTOR TOOLSET 07/06/2011163 
						

							9. Configurator, Color alignment
164R5905073 PROJECTOR TOOLSET 07/06/2011 
						

							10. Installation Settings
10. INSTALLATION SETTINGS
Overview
• Image orientation
• Lamp settings
10.1 Image orientation
The different configurations
The following installation are possible:
• front/table
• front/ceiling
• rear/table
• rear/ceiling
• auto front : automatic front, projector detects itself if it is ceiling or table mounted and projects always
a readable image.
• auto rear : automatic rear, projector detects itself if it is ceiling or table mounted and projects always
a readable image.
Font : projector is installed in table or ceiling mount configuration at the same side of the screen as the
audience.
Rear: projector is installed in table or ceiling mount configuration at the other side of the screen opposite
the audience.
How to change
1. Click on the drop down arrow of the combo box in the Image orientation pane. (image 10-1)
A list with the possible selection opens.
2. Select the correct orientation from the list.
The icon next to the combo box changes accordingly.
Image 10-1
Image orientation
10.2 Lamp settings
Current lamp settings
Lamp status
R5905073 PROJECTOR TOOLSET 07/06/2011
165 
						

							10. Installation Settings
Indicates the status of the lamp.
Lamp on Image projection possible
Lamp offImage projection not possible
Image 10-2
Lamp settings
Serial number
Serial number of the current installed lamp.
Nominal power
Nominal power that can be fed to the lamp.
Actual power
Current power fed to the lamp.
Article number
Article number of the current installed lamp
Lamp power mode
1. Click on the drop down box and select the desired power mode.
166
R5905073 PROJECTOR TOOLSET 07/06/2011