Barco Projector Cineversum 80 Quickstart Manual

							9. Points of Similarity between Graphical display and On Screen Menus
Graphical Display
on Cine VERSUM MasterOn Screen Display
CV50, CV80 and CV120
Installation
7 xga75_gs.c03  Input slots
  File service
>Display list
  Internal pattern
  When no signal
  Source transition
  OSD configuration
  Language
  Keystone
  Global keystone: Yes
  Default Input Balance
Back
Sub  menuSub  menu
   
 Installation
  Input slots
  File services
  Display List
  Internal patterns
  When no signal
  Source transition
  OSD configuration
  Language
  Keystone
  Global keystone: Yes
  Default Input Balance
Back
Image 9-5
Conclusion for the manual
Only the on screen menus will be depicted as illustration for the set up in the adjustment mode, except when a menu is specific for
the graphical display or the on screen display.
R5976468 CINE VERSUM SYSTEM 03112003
67 
						

							9. Points of Similarity between Graphical display and On Screen Menus
68R5976468 CINE VERSUM SYSTEM 03112003 
						

							10. Overview GUI Menu Screens
10. OVERVIEW GUI MENU SCREENS
Overview
• Overview Main menu
• Overview Image Settings
• Overview Advanced Settings
• Overview Installation
• Overview Service
10.1 Overview Main menu
Main Menu
CineVERSUMImage  settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Shut Down
BackAdvanced SettingsAspect Ratio
Position
PIP Configuration
Blanking
Phase
Input Balance
Back
InstallationInput Slots
File Services
Display List
Internal Patterns
W hen no signal
Source Transition
OSD configuration
Language
Keystone
Global Keystone:Yes
Output: Smallest
Default Input Balance
Back
ServiceIdentification
Password
IR Address: 001
Common Address: 000
Serial Communication
I2C Diagnosis
Back
Main Menu
    Image Settings
    Advanced Settings
    Installation
    Service
Address Display
Address Master
Display List1 CV50        On
2 CV80        On
3 CV120      On
BackImage SettingsMaster
  Brightness
  Contrast
  Saturation
  Tint*
Display
Back
Image SettingsDisplay
  Brightness
  Contrast
  Gamma
  Color Temperature
  
MasterBack
Image SettingsDisplay
  Brightness
  Contrast
  Gamma
  Color Temperature
  Primaries:[Projector]
  W hite peak: [OFF]
MasterBack
Image SettingsDisplay
  Brightness
  Contrast
  Gamma
  Color Temperature
  Primaries:[Projector]
  Lamp mode:[Single]
  Lamp Power:[Normal]
MasterBack
PlasmaCV80
CV120
If one Display only
Cine VERSUM r01Example of a display list
* for NTSC video signals only
Image 10-1
If a PASSWORD has been installed (see Service menu) , Installation and Service menu are password protected.
That means that, when selecting one of the mentioned items, a pop up screen appears requesting to enter the
password number.
R5976468 CINE VERSUM SYSTEM 0311200369 
						

							10. Overview GUI Menu Screens
10.2 Overview Image Settings
Main Menu-Image Settings
CineVERSUMImage  settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Shut Down
Back
Main Menu
    Image Settings
        
0255 Brightness  125
0255 Contrast  125
0255 Saturation 125
0255 Tint  125
Image SettingsMaster
  Brightness
  Contrast
  Saturation
  Tint
Display
Back
Image SettingsDisplay
  Brightness
  Contrast
  Gamma
  Color Temperature
  Primaries:[Projector]**
  W hite peak: [OFF]***
  Lamp mode:[Single]*
  Lamp Power:[Normal]*
Master
Back
Via Display
Via Master
50150 Contrast  100
Gamma *1.0
  1.3
  1.6
  1.9
  2.2
  2.5
  2.8
  3.1
  Film*
  Graphics*
  Video*
Back
Color Temperature*Display W hite
 Computer 9300K
 Video 6500K
 Film 5400K
 Broadcast 3200K
 Custom Balance
Back
Set Color coordinates 
for white  to adjust 
Color Temperature
     W hite (X): 0.313
     W hite (Y): 0.329
Back
-127127 Brightness  0Display List1 CV50  On
2 CV80 On
3 CV120 On
Back
Front control adjust X
Push to accept
Arrow Left/Right adjust X
Arrow Up/Down adjust Y
 to accept
W hite (X): 0.313
W hite (Y): 0.329
* only CV120
** only CV120-CV80
*** Only CV80
[Projector/EBU/ANSI]
[On/Off]
[Normal/Economic]
Cine VERSUM r01* for CV80 only
Lamp*Dual
 Single
Back
For NTSC video signals onlyIf 1 display in the link
Image 10-2
70R5976468 CINE VERSUM SYSTEM 03112003 
						

							10. Overview GUI Menu Screens
10.3 Overview Advanced Settings
Main Menu-Advanced Settings
Advanced SettingsAspect Ratio
Position
PIP Configuration
Blanking
Phase*
Input Balance*
Back
Main Menu
  Advanced Settings 
PIP ConfigurationPIP [Yes]
Horizontal Shift
Horizontal Size
Vertical Shift
Vertical Size
Back
01024 Horizontal Shift    512
1281230 Horizontal Size    679
0614 Vertical Shift        207
76718 Vertical Size        379
Yes/No
Blanking Top
 Bottom
 Left
 Right
Back
0255 Top         126
0255 Bottom    126
0511 Left       207
0511 Right     207031 Phase   15
Input Balance W hite Balance
 Black Balance
 Factory Settings
Back
White Balance Gain Red
 Gain Blue 
Back
Black Balance Black level Red
 Black Level Blue 
Back
-128127 Gain Red        0
-128127 Gain Blue    0
-128127 Black Level Red       0
-128127 Black Level Blue     0
Aspect Ratio  Fit
*16:9
  4:3
  5:4
  2.35
  1.88
  1.78
  Letterbox
Back
PositionHorizontal Shift
Horizontal Size
Vertical Shift
Vertical Size
Back
-255+255 Horizontal Shift    0
-511+511 Horizontal Size    0
-255+255 Vertical Shift        0
-511+511 Vertical Size        0
* Active for RGB
Cine VERSUM r01
Image 10-3
R5976468 CINE VERSUM SYSTEM 0311200371 
						

							10. Overview GUI Menu Screens
10.4 Overview Installation
Main Menu-Installation 1
Input SlotsSlot  Modue Type
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 SDI
5 DVI
6 NO MODULE
7 RGB-YUV [RGB]
8 HDTV SDI
Back
File ServiceLoad
Edit
Rename
Copy
Delete
Delete All
Options
Back
InstallationInput Slots
File Service
Display List
Internal Pattern
W hen no signal
Source Transition
OSD configuration
Language
Keystone
Global Keystone:Yes
Output: [Largest]
Default Input Balance
Back
Video
S-Video
YUV
RGB
YUV
Load FileList Matching Files
List All Files
Back
Edit FileActive File
Select File
Back
Edit: vid625_2.c02Horizontal
  Total            864 pixels
  Active          692 pixels
  Start            130 pixels
  Periode       63875ns
Vertical
  Total            312 lines
  Active          285 lines
  Start            25 lines
Interlaced      [Yes]
Read AMDS
Options
Back 
Total Pixels  864
0----------4095
Active Pixels  692 
0----------2047
Start Pixel  130
0----------2047
Period
Enter New Value
63875
Total Lines  312
0----------4095
Active Lines  285
0----------2047
Yes/No
Edit: vid625_2.c02Source Number     3
Clamp
  Position       [Trailing]
  Delay          4
  W idth          46
Field
  Polarity        [neg.]
  Select          [Both]
V. Refresh     [sync]
Film mode     [On]
Back
Leading/Trailing
neg/pos/auto
Both/Even/Odd
Sync/Async
On/OffClamp Delay
Enter New Value
004
Clamp W idth
Enter New Value
46
Edit Filevid625_2  .c01 3 692x285i
xga75_gs .c02 7 1030x768
video625  .s01 0 1024x278i
vid525_2  .s03 0 692x240i
sdi_525    .s05 0 718x242i
more.......
Back
Main Menu
   Installation 1
      Input Slots
      File Service 1
Cine VERSUM r01
Image 10-4
72R5976468 CINE VERSUM SYSTEM 03112003 
						

							10. Overview GUI Menu Screens
Main Menu-Installation 2
File ServiceLoad
Edit
Rename
Copy
Delete
Delete All
Options
Back
InstallationInput Slots
File Service
Display List
Internal Pattern
W hen no signal
Source Transition
OSD configuration
Language
Keystone
Global Keystone:Yes
Output: [Largest]
Default Input Balance
Back
Rename Filevideo625 .c01 0 1024x278i
vid525_2 .c03 0692x240i
Back
Copy Filevid625_2 .c01 3 692x285i
xga75_gs.c02 7 1030x768
video625 .c01 0 1024x278i
vid525_2 .c03 0 692x240i
sdi_525   .c05 0 718x242i
more.......
Back
Main Menu
   Installation 2
     File Service 2
     Display List
     Internal Pattern
     When no signal
Rename FileEnter new value
vid525_2 .c03
Copy FileEnter new value
- - - - - - - - 
Delete Filevid625_2 .c01 3 692x285i
xga75_gs.c02 7 1030x768
video625 .s01 0 1024x278i
vid525_2 .s03 0 692x240i
sdi_525   .s05 0 718x242i
more.......
Back
Delete AllAre you sure?
No
Yes
Back
OptionsSort [Index]
Load [Manually]
BackInternal PatternsBackground
Outline
Hatch
Colorbars
Graybars
Multiburst
Checkerboard
Purity
Alphanumeric
Page Character
Back
When No signalShutdown [OFF]
Delay (min): 40
BackOff/On
Message
Save Data
Message
Save Data
Index/Name
Manually/Automatic
When No signalShutdown [On]
Delay (min): 40
BackShutdown DelayEnter new value
40
Cine VERSUM r01
Display List1 CV50  On
2 CV80 On
3 CV120 On
Back
Image 10-5
Main Menu-Installation 3
Source Transition*None
 Fade
 W ipe Right
 W ipe Down
 Split
 Box
 Checkerboard (1)
More...
Back
InstallationInput Slots
File Service
Display List
Internal Pattern
W hen no signal
Source Transition
OSD configuration
Language
Keystone
Global Keystone:Yes
Output: [Largest]
Default Input Balance
Back
Main Menu
   Installation 3
      Source Transition
       OSD Configuration
       Language
       Keystone
       Global Keystone
OSD ConfigurationMenu Status [On]
Menu Position
V: [Center]
  H: [Center]
Barscale Status [On]
Barscale Position
  V: [Center]
  H: [Center]
Message Status [On]
Back
Top/Center/Bottom On/Off
Left/Center/Right
Top/Center/Bottom
Left/Center/RightOn/Off
Language  English
  Dutch
  French
Back
-255+255 Keystone: 0
Yes/NoOn/Off
Factory adjusted
Source Transition Checkerboard (2)
 Worm
 Clock
 Worms
 Diagonal
 W obble
 Slide
 Random
More...
Back
Largest/Smallest
Cine VERSUM r01
Image 10-6
R5976468 CINE VERSUM SYSTEM 0311200373 
						

							10. Overview GUI Menu Screens
Main Menu-Installation 4
InstallationInput Slots
File Service
Display List
Internal Pattern
W hen no signal
Source Transition
OSD configuration
Language
Keystone
Global Keystone:Yes
Output: [Largest]
Default Input Balance
Back
Main Menu
   Installation 4
      Display List
         Display Settings
    
Display NameEnter new name
- - - - - - - - - - - - - - - - - - - -
IR AdressEnter new value
009
*not displayed for CV50
** for CV120 only
OFF (to standby)
ON (to operation)
Display InfoSerial nr: 25416345
Type: CineVERSUM 80
Date: xx/xx/xx
Temperature: 52
Runtime: 87h
Software: 0.32
Firmware:
   Deserializer: 1
   Interface**:
Formatter: 65 67 5 88*
Lamp Type*: 1
CW -ID***:ff
Lamp Runtime*
Lamp History*
Back
* not displayed for CV50
** not displayed for CV80 and CV120
*** For CV80 only
Orientation  *Front/Table
   Rear/Table
   Front/Ceiling
   Rear/Ceiling
Back
Orientation   Front/Table
   *Rear/Table
   Front/Ceiling
   Rear/Ceiling
Back
Display Settings Switch OFF
 Display Info
 Rename
 IR Address 009
 Diagnosis
 CW  Index*
 Orientation*
 Test patterns
 Lens**
 Lamp**
Back
Diagnosis  RGB-Loop:           On
  Panel:                   On
  Temperature:        ok
  Lamp:                   ok
  Power:                  ok
  FPGA:                  ok
  Cool Down:          No
  Fan:                      ok
  Formatter status* 
Back
0 720 CW  Index    310
CW indexUse test pattern
   Yes
   No
Back
Run TimesDisplay
 Total:197 h
Lamp
 Total: 195 h
 55: 6 h
Colorwheel
 Total: 163
 35-45: 3 h
 45-50: ;10 h
 50-55: 21 h
 >55: 4 h
Back
Lamp History  Current
  2: - - -
  3: - - -
  4: - - -
  5: - - -
  6: - - -
  7: - - -
  8: - - -
  9: - - -
  Add lamp*
  Reset History*
Back
Cine VERSUM r01
Display List1 CV50  On
2 CV80 On
3 CV120 On
Back
Lens  Focus
  Hor. Shift
  Vert. shift
  Zoom
BackLens  Use arrow keys
      to control
        the lens
Back
Lamp  Modes: [Lamp 2]
  Power: [normal]
Max run time Lamp 1
   Run time: 50
   Nr Strikes: 20
   Last power: 200W
 Lamp 1
   Run time: 41
   Nr Strikes: 8
   Last power: 200W
BackLamp   Dual
   Least used
   Lamp 1
  *Lamp 2
Back
[Normal/Economic]
Test Pattern*  Black
  W hite
  Green
  Red
  Blue
  Checkerboard
  Alignment pattern
  Horizontal ramp
  Vertical ramp
Back
* for CV120 only
Test Pattern*  Grid
  Horizontal Ramp
  Vertical Ramp
  Horizontal Lines
  Vertical Lines
  Diagonal Lines
  Solid Field
Back
* for CV80 and VC50 only*  not for CV120
New lamp serial Nr  Enter new value
   _ _ _ _ _ _ _  _     Add Lamp Add lamp to history
   No
   Yes
  Reset History  Are you sure?
    No
    Yes
*  for CV120 only
Formatter status                       RGB
Normal mode  111 
C/P error         000
Dnld complete 000
System reset   000
System status 111
System ready  111
RAMBUS init   000
Image 10-7
74R5976468 CINE VERSUM SYSTEM 03112003 
						

							10. Overview GUI Menu Screens
10.5 Overview Service
Main Menu-Service
CineVERSUMImage  settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Shut Down
BackServiceIdentification
Password
IR Address 001
Common Address 000
Serial Communication 
I2C Diagnosis
Back
Main Menu
    ServiceIdentificationCine VERSUM Master
IR Address: 1
Soft Version: 1.23
Baudrate PC:  115200
Serial no: 0000000
Runtime:  135h
Link Time
 Jul 17 2002
 11:51:28
Back
PasswordUse Password: [No]
Modify Password
BackNew PasswordEnter New Value
- - - -  Yes or No
IR AddressEnter New Value
001
Ser
ial Co
mmun
icatio
nBa
udra
te: [1
1520
0]Int
erfac
e: [R
S232
]
Te
rmin
ation
: [On
]
Bac
k
1200/4800/9600/
19200/38400/
57600/115200/230400
RS232/RS422
On or Off
I2C DiagnosisINPUT  SELECT 74H +++
INPUT  SELECT e0H +++
INPUT  SELECT e2H +++
INPUT  SELECT e4H +++
LOCAL CTRL      ecH +++
PMP                    4aH +++
LCD DISPLAY     7aH +++
Back
000 or 001
Cine VERSUM r01
Image 10-8
R5976468 CINE VERSUM SYSTEM 0311200375 
						

							10. Overview GUI Menu Screens
76R5976468 CINE VERSUM SYSTEM 03112003