Barco Projector Cineversum 70 Quickstart Manual

9. Installation menu
9. INSTALLATION MENU
Overview
• Installation menu overview
• Start up the Installation menu
• Input Slots
•Fileservice
• Internal pattern
• When no signal
• Source transition
• On Screen Display Configuration
• Language support
• Vertical keystone
• Horizontal keystone
• Global keystone
• Orientation
9.1 Installation menu overview
Overview
• Input slots
•Fileservice
- Auto search
- Film mode
- Color space
• Internal patterns
• When no signal
• Source transition
• OSD configuration
•...

9. Installation menu
Start up
1. PressADJorENTERto start up the Main menu. (menu 9-1)
2. Push the cursor key↑or↓to selectInstallation.
3. PressENTERto select.
TheInstallationmenu will be displayed. (menu 9-2)
Main Menu
Image settings
Advanced settings
Installation
Service
1. PC
2. RGB/Component
3. DVI
4. SVideo
* 5. Video
6. Component
Shutdown
Back
Menu 9-1
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global...

9. Installation menu
9.3.2 Reset a single input
What can be done ?
Via Image settings and Advanced settings the image can be modified as desired. But when some misalignments are discovered,
it sometimes not so easy to return to the standard settings. Therefore, with aReset a single input,itispossibletoreturntosource
factory defaults.
How to reset a single input ?
1. Push the cursor key↑or↓to highlightInput slots. (menu 9-5)
2. PressENTERto select.
The input slots menu will be displayed. (menu 9-6)
3....

9. Installation menu
The reset be executed without confirmation warning.
9.4 File service
Overview
• Auto search
• Film mode
• Color Space
9.4.1 Auto search
What can be done ?
When a not active input is selected, the projector can scan automatically the inputs and display the first active source. When auto
search is off, the projector stays on the selected source and waits until a signal is available.
During the scanning the projector follows priority :
1. PC
2. DVI
3. Video
4. S-Video
5. 5 RCA
6. 3 RCA...

9. Installation menu
This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any time
2:2 pull-down
The process of transferring 24-frames/sec film format into video by repeating each frame (used for PAL DVD’s) as two
video fields. ( AD )
3:2 pull-down
Method used to map the 24 fps of film onto the 30 fps (60 fields) or 25 fps (50 fields), so that one film frame occupies
three video fields, the next two, etc. It means the two fieldsof every other video frame...

9. Installation menu
Progressive scan
A video scanning system that displays all lines of a frame in one pass.
Color space
1. Push the cursor key↑or↓to highlightFile service. (menu 9-14)
2. PressENTERto select.
TheFile servicemenu will be displayed. (menu 9-15)
3. Push the cursor key↑or↓to highlightColor space.
4. PressENTERto toggle betweenYCbCr,YPbProrSMPTE240.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global...

9. Installation menu
9.6 When no signal
What can be done ?
When the projector does not detect an input source, it can be set up to switch automatically to stand by after a certain time which
can be set up during installation.
’When no signal’ set up.
1. Push the cursor key↑or↓to highlightWhen no signal. (menu 9-18)
2. PressENTERto select.
TheWhen no signalmenu appears. (menu 9-19)
3. Push the cursor key↑or↓to highlightShutdown.
4. PressENTERto toggle betweenONandOFF.
ON The projector shuts down after a...

9. Installation menu
How to set up a source transition ?
1. Push the cursor key↑or↓to highlightSource transition. (menu 9-21)
2. PressENTERto select.
TheSource transitionmenu will be displayed. (menu 9-22)
An asterisk (*) indicates the actual set up.
3. Push the cursor key↑or↓to highlight the desired transition.
4. PressENTERto select.
The asterisk jumps to the selected item.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone...

9. Installation menu
5. Push the cursor key↑or↓to highlightHbelowMenu position.
6. PressENTERto toggle betweenLeft,CenterandRight.
Toggle until the desired horizontal position is obtained.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-23
OSD configuration
Menu position
V Top
H Left
Barscale status Yes
Barscale position
V Top
H Right
Message status Yes
Back
Menu 9-24
9.8.2...

9. Installation menu
5. Push the cursor key↑or↓to highlightHbelowBarscale position.
6. PressENTERto toggle betweenLeft,CenterandRight.
Toggle until the desired horizontal position is obtained.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-27
OSD configuration
Menu position
V Top
H Left
Barscale status Yes
Barscale position
V Top
H Right
Message status Yes
Back
Menu 9-28...