Barco Projector Cineversum 70 Quickstart Manual

							HOMECINEMA
CINEVERSUM 60/70
INSTALLATION MANUAL
22042004R5976763/00 
						

							Barco nv Home Cinema
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.89.69
Fax: +32 56.36.83.54
E-mail:[email protected]
Visit us at the web: www.homecinema.barco.com
Printed in Taiwan 
						

							Changes
Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war-
ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the
program(s) described in this publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this
publication; these changes are incorporated in new editions of this publication.
Copyright ©
All rights reserved. No part of this documentmay be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or
stored in a retrieval system without the prior written consent of Barco.
Federal Communications Commission (FCC Statement)
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of thisequipment in a residential area is likely to
cause harmful interference in which case the user is encouraged to tryto correct the interference by one or more of the following measures.
Introduction to the user :
If this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the
following measures :
• Re-orientation of the receiving antenna for the radio or television.
• Relocate the equipment with respect to the receiver.
• Plug the equipment into a different outlet so that the equipment and receiver are on different branch circuits.
• Fasten cables connectors to the equipment by mounting screws.
The use of shielded cables is required to comply within the limits of Part 15 of FCC rules and EN55022.
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser
must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco
must be informed immediately in writing of any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning,
at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can repair the fault or provide a replacement
at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a
reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or
indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component
of the system or independent service, will be deemed invalid provided thedamage is not proven to be attributed to the absence of properties
guaranteed in writing or due to the intent or gross negligence or part of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly,
in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not
agreed upon in the contract, all guarantee claims of the purchaser willbe rendered invalid. Not included in the guarantee coverage are
system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as
well as normal maintenance are not subject to theguarantee provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations specified in the this manual must be complied with by
the customer.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders.
All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for
the products or their manufactures. 
						

							Table of contents
TABLE OF CONTENTS
1. Packaging and Dimensions ....................................................................................... 31.1 Box content............................................................................................................................ 3
1.2 Projector Packaging................................................................................................................... 3
1.3 Dimensions ............................................................................................................................ 4
2. Installation Guidelines.............................................................................................. 72.1 Safety Warnings....................................................................................................................... 7
2.2 General ................................................................................................................................7
2.3 Projector Configuration and Position ................................................................................................. 8
2.4 Safety Area around projector ........................................................................................................ 10
2.5 Cleaning the lens . .................................................................................................................... 10
2.6 Vertical lens shift ..................................................................................................................... 11
2.7 Battery Insertion in the Remote Control ............................................................................................. 12
2.8 Ceiling Mount assembly. . ............................................................................................................ 13
3. Connections.........................................................................................................153.1 Removing the Connector cover . ..................................................................................................... 15
3.2 Power Connection.................................................................................................................... 15
3.3 Input facilities . . . . . .................................................................................................................... 16
3.4 S-Video input . . . . . .................................................................................................................... 17
3.5 Composite Video input............................................................................................................... 18
3.6 5-Cable input ......................................................................................................................... 18
3.7 Component Input . .................................................................................................................... 20
3.8 Digital Visual Interface (DVI) input . . ................................................................................................. 21
3.9 Computer input (RGB analog) . . ..................................................................................................... 22
3.10 RS232-422 IN connection........................................................................................................... 22
3.11 Trigger outputs . . . .................................................................................................................... 23
4. Getting Started......................................................................................................254.1 Terminology overview ................................................................................................................ 25
4.2 Switching on.......................................................................................................................... 27
4.3 Lamp runtime......................................................................................................................... 27
4.4 Switching from operational mode to standby . . ...................................................................................... 28
4.5 Switching off the projector ........................................................................................................... 28
4.6 Temperature error DMD.............................................................................................................. 28
4.7 Using the RCU ....................................................................................................................... 28
4.8 Projector Address .................................................................................................................... 29
4.9 Controlling the projector.............................................................................................................. 29
5. Getting used to the menu structure.............................................................................315.1 How to start up the menus ........................................................................................................... 31
5.2 How to use the menus ............................................................................................................... 31
5.3 How to make an adjustment ......................................................................................................... 32
5.4 Access Control via a password ...................................................................................................... 32
6. Source Selection ...................................................................................................336.1 Selecting a source ................................................................................................................... 33
7. Image Settings menu ..............................................................................................357.1 Image settings menu overview ...................................................................................................... 35
7.2 Starting the Image settings menu ................................................................................................... 35
7.3 Brightness ............................................................................................................................ 36
7.4 Contrast............................................................................................................................... 36
7.5 Saturation............................................................................................................................. 36
7.6 Tint (hue) . . ........................................................................................................................... 37
7.7 Sharpness . ........................................................................................................................... 38
7.8 Gamma ............................................................................................................................... 38
7.9 Color Temperature ................................................................................................................... 39
7.9.1 Predefined Color Temperature................................................................................................ 39
7.9.2 Custom Color Balance ........................................................................................................40
7.9.3 Color standard . ................................................................................................................ 40
7.10 White peak ........................................................................................................................... 42
8. Advanced Settings .................................................................................................438.1 Advanced settings menu overview .................................................................................................. 43
8.2 Start up the Advanced settings ...................................................................................................... 43
8.3 Aspect Ratio.......................................................................................................................... 44
8.4 Image Position ....................................................................................................................... 46
8.4.1 Horizontal shift................................................................................................................. 46
8.4.2 Horizontal size ................................................................................................................. 47
8.4.3 Vertical shift.................................................................................................................... 48
8.4.4 Vertical size .................................................................................................................... 49
8.5 Blanking .............................................................................................................................. 50
R5976763 CINEVERSUM 60/70 22042004
1 
						

							Table of contents
8.6 Input Balance . . . . . .................................................................................................................... 51
8.6.1 Introduction to Input Balance . ................................................................................................. 52
8.6.2 Adjusting the Input Balance for RGB signals................................................................................. 53
8.6.3 Input balance for YUV signals................................................................................................. 54
8.6.4 Returning to the factory defaults ..............................................................................................55
9. Installation menu ...................................................................................................579.1 Installation menu overview........................................................................................................... 57
9.2 Start up the Installation menu........................................................................................................ 57
9.3 Input Slots . ........................................................................................................................... 58
9.3.1 5 RCA input selection (RGB/component input) . .............................................................................. 58
9.3.2 Reset a single input ........................................................................................................... 59
9.3.3 Reset all inputs ................................................................................................................ 59
9.4 File service ........................................................................................................................... 60
9.4.1 Auto search .................................................................................................................... 60
9.4.2 Film mode...................................................................................................................... 60
9.4.3 Color Space.................................................................................................................... 61
9.5 Internal pattern ....................................................................................................................... 62
9.6 When no signal . . . .................................................................................................................... 63
9.7 Source transition ..................................................................................................................... 63
9.8 On Screen Display Configuration.................................................................................................... 64
9.8.1 Menu position.................................................................................................................. 64
9.8.2 Bar scale status................................................................................................................ 65
9.8.3 Bar scale position.............................................................................................................. 65
9.8.4 Message status................................................................................................................ 66
9.9 Language support .................................................................................................................... 66
9.10 Vertical keystone ..................................................................................................................... 67
9.11 Horizontal keystone .................................................................................................................. 68
9.12 Global keystone ...................................................................................................................... 69
9.13 Orientation............................................................................................................................ 69
10.Service menus ......................................................................................................7110.1 Service menu overview .............................................................................................................. 71
10.2 Start up the Service menu ........................................................................................................... 71
10.3 Identification screen . . ................................................................................................................ 72
10.4 Password ............................................................................................................................. 72
10.4.1 Enable-disable password. ..................................................................................................... 72
10.4.2 Modify password............................................................................................................... 73
10.5 IR address............................................................................................................................ 74
10.6 RS232 address . . . .................................................................................................................... 74
10.7 Serial communication ................................................................................................................ 74
10.7.1 Baudrate setup ................................................................................................................ 74
10.7.2 Serial communication interface selection.....................................................................................75
10.8 Thermal Diagnosis................................................................................................................... 76
10.9 I2C Diagnosis . . . . .................................................................................................................... 76
A. Specifications .......................................................................................................77A.1 Specifications for CineVERSUM 60 ................................................................................................. 77
A.2 Specifications for CineVERSUM 70 ................................................................................................. 78
B. Maintenance .........................................................................................................81B.1 Error reporting via the LEDs . . . . ..................................................................................................... 81
Glossary .................................................................................................................83
Index......................................................................................................................85
2R5976763 CINEVERSUM 60/70 22042004 
						

							1. Packaging and Dimensions
1. PACKAGING AND DIMENSIONS
Overview
• Box content
• Projector Packaging
• Dimensions
1.1 Box content
CEE7
European power plug to connect the power cord to the wall outlet.
ANSI 73.11
American power plug to connect the power cord to the wall outlet.
Content
• 1 CineVERSUM 60 or CineVERSUM 70 projector
• 1 remote control unit RCU + 2 batteries.
• 2 power cables with outlet plug type CEE7 and ANSI 73.11.
• 1 spanner to shift the lens
• 1 owners manual European languages (English, French, German, Italian, Spanish)
• 1 owners manual Asian languages (Chinese, Japanese)
• 1 installation manual
• 1 safety manual multilingual
1.2 Projector Packaging
Way of Packaging
The projector is packed in a carton box. To provide protection during transportation, the projector is surrounded with foam. The
package is secured with banding and fastening clips.
To unpack
1. Pull off the adhesive tape or cut the adhesive tape but take care not to insert the knife too deep otherwise the projector can be
damaged.
2. Take the projector out of its shipping carton, remove the foam rubber and place it on a table. (image 1-1)
R5976763 CINEVERSUM 60/70 22042004
3 
						

							1. Packaging and Dimensions
Image 1-1
Projector packaging
Save the original shipping carton and packing material, they will be necessary if you ever have to ship your
projector. For maximum protection, repack your projector as it was originally packed at the factory.
1.3 Dimensions
Left side view
A
Image 1-2
Left side view
A Air outlet
4
R5976763 CINEVERSUM 60/70 22042004 
						

							1. Packaging and Dimensions
Right side view
A
B
Image 1-3
Right side view
A Air inlet
B Adjustable feet
Front view
AImage 1-4
Front view
A Air outlet
R5976763 CINEVERSUM 60/70 22042004
5 
						

							1. Packaging and Dimensions
Bottom view
A
B C
Image 1-5
Bottom view
A Vertical lens shift bolt
B M8 bolt for security chain when ceiling mounted
C Air inlet
6
R5976763 CINEVERSUM 60/70 22042004