Barco Projector Cineversum 70 Quickstart Manual
Have a look at the manual Barco Projector Cineversum 70 Quickstart Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 183 Barco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9. Installation menu 9. INSTALLATION MENU Overview • Installation menu overview • Start up the Installation menu • Input Slots •Fileservice • Internal pattern • When no signal • Source transition • On Screen Display Configuration • Language support • Vertical keystone • Horizontal keystone • Global keystone • Orientation 9.1 Installation menu overview Overview • Input slots •Fileservice - Auto search - Film mode - Color space • Internal patterns • When no signal • Source transition • OSD configuration • Language • V-keystone • H-keystone • Global keystone • Orientations 9.2 Start up the Installation menu The installation menu can be password protected when the password protection is set to on. R5976763 CINEVERSUM 60/70 2204200457
9. Installation menu Start up 1. PressADJorENTERto start up the Main menu. (menu 9-1) 2. Push the cursor key↑or↓to selectInstallation. 3. PressENTERto select. TheInstallationmenu will be displayed. (menu 9-2) Main Menu Image settings Advanced settings Installation Service 1. PC 2. RGB/Component 3. DVI 4. SVideo * 5. Video 6. Component Shutdown Back Menu 9-1 Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-2 9.3 Input Slots Overview • 5 RCA input selection (RGB/component input) • Reset a single input • Reset all inputs 9.3.1 5 RCA input selection (RGB/component input) What can be done ? The 5 RCA input can accept RGB signals as well as Component signals. Therefor, this input must be configured for the correct signal input. How to configure ? 1. Push the cursor key↑or↓to highlightInput slots. (menu 9-3) 2. PressENTERto select. The input slots menu will be displayed. (menu 9-4) 3. Push the cursor key↑or↓to highlight the 5 RCA selection. 4. PressENTERto toggle betweenRGB,YUV or SCART. RGB Input is configured to accept RGB signals. YUV Input is configured to accept component signals SCART Input is configured to accept RGB signals with Video as sync on the Hs input. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-3 Input slots 5 RCA YUV Reset single slot PC RGB/Component DVI SVideo Video Component Reset all slots All input slots Back Menu 9-4 58R5976763 CINEVERSUM 60/70 22042004
9. Installation menu 9.3.2 Reset a single input What can be done ? Via Image settings and Advanced settings the image can be modified as desired. But when some misalignments are discovered, it sometimes not so easy to return to the standard settings. Therefore, with aReset a single input,itispossibletoreturntosource factory defaults. How to reset a single input ? 1. Push the cursor key↑or↓to highlightInput slots. (menu 9-5) 2. PressENTERto select. The input slots menu will be displayed. (menu 9-6) 3. Push the cursor key↑or↓to highlight the input slot which must be reset. (e.g. Video) 4. PressENTERto select. The specific reset menu will be displayed. (menu 9-7) 5. Push the cursor key↑or↓to select the corresponding source type. (e.g. PAL source). 6. PressENTERto reset. If the selected source corresponds with the input signal, the projector will load the source default. If the selected source does not correspond, nothing will happen. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-5 Input slots 5 RCA YUV Reset single slot PC RGB/Component DVI SVideo Video Component Reset all slots All input slots Back Menu 9-6 Video slots defaults Reset PAL Reset SECAM Reset NTSC Reset PAL non intl Reset NTSC non intl Back Menu 9-7 The reset be executed without confirmation warning. 9.3.3 Reset all inputs What can be done ? All settings of all inputs can be reset to the default values. How to reset all inputs ? 1. Push the cursor key↑or↓to highlightInput slots. (menu 9-8) 2. PressENTERto select. The input slots menu will be displayed. (menu 9-9) 3. Push the cursor key↑or↓to highlightAll input slots. All input will be reset to the default values. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-8 Input slots 5 RCA YUV Reset single slot PC RGB/Component DVI SVideo Video Component Reset all slots All input slots Back Menu 9-9 R5976763 CINEVERSUM 60/70 2204200459
9. Installation menu The reset be executed without confirmation warning. 9.4 File service Overview • Auto search • Film mode • Color Space 9.4.1 Auto search What can be done ? When a not active input is selected, the projector can scan automatically the inputs and display the first active source. When auto search is off, the projector stays on the selected source and waits until a signal is available. During the scanning the projector follows priority : 1. PC 2. DVI 3. Video 4. S-Video 5. 5 RCA 6. 3 RCA How to set up ? 1. Push the cursor key↑or↓to highlightFile service. (menu 9-10) 2. PressENTERto select. TheFile servicemenu will be displayed. (menu 9-11) 3. Push the cursor key↑or↓to highlightAuto search. 4. PressENTERto toggle betweenONandOFF. ON Projector scans for an active source OFFProjector stays on the selected input Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-10 File service Auto search ON Film mode ON Color space Back Menu 9-11 9.4.2 Film mode What can be done ? Some sources like common DVD material are derived from cinema 24 Hz sources (2/2 or 3/2 pull down method). The film mode detection insures that these converted signals are shown without artefacts. 60 R5976763 CINEVERSUM 60/70 22042004
9. Installation menu This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any time 2:2 pull-down The process of transferring 24-frames/sec film format into video by repeating each frame (used for PAL DVD’s) as two video fields. ( AD ) 3:2 pull-down Method used to map the 24 fps of film onto the 30 fps (60 fields) or 25 fps (50 fields), so that one film frame occupies three video fields, the next two, etc. It means the two fieldsof every other video frame come from different film frames making operations such as rotoscoping impossible, and requiring care in editing. Some sophisticated equipment can unravel the 3:2 sequence to allow frame-by-frame treatment and subsequently re-compose 3:2. The 3:2 sequence repeats every five video frames and four film frames, the latter identified as A-D. Only film frame A is fully on a video frame and so exists at one time code only, making it the editable point of the video sequence. Artefacts Undesirable elements or defects in a video picture. These may occur naturally in the video process and must be eliminated in order to achieve a high-quality picture. Most common in analog are cross color and cross luminance. Most common in digital are macroblocks, which resemble pixelation of the video image. Enabling/disabling the film mode detection 1. Push the cursor key↑or↓to highlightFile service. (menu 9-12) 2. PressENTERto select. TheFile servicemenu will be displayed. (menu 9-13) 3. PressENTERto toggle betweenONandOFF. ONFilm mode is enabled. OFFFilm mode is disabled. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-12 File service Auto search ON Film mode ON Color space Back Menu 9-13 9.4.3 Color Space Color Space The color range between specified references. Typically references are quoted in television: RGB, Y, R-Y, B-Y, YIQ, YUV and Hue Saturation and Luminance (HSL). In print, Cyan, Magenta, Yellow and Black (CMYK) are used. Moving pictures between these is possible but requirescareful attention to the accuracy of processing involved. Operating across the media--print, film and TV, as well as between computers and TV equipment--will require conversions in color space. About color space Color space selection is only active for progressive component video signals on the 5-cable (5 RCA) or the Component (3 RCA) input. It is possible to change the values of the color matrix with predefined values so that the result color changes. R5976763 CINEVERSUM 60/70 22042004 61
9. Installation menu Progressive scan A video scanning system that displays all lines of a frame in one pass. Color space 1. Push the cursor key↑or↓to highlightFile service. (menu 9-14) 2. PressENTERto select. TheFile servicemenu will be displayed. (menu 9-15) 3. Push the cursor key↑or↓to highlightColor space. 4. PressENTERto toggle betweenYCbCr,YPbProrSMPTE240. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-14 File service Auto search ON Film mode ON Color space Back Menu 9-15 9.5 Internal pattern What can be done ? To check to alignment of the projector, different internal patterns are built-in. Once a pattern is selected and displayed, a second pattern of the same type can be displayed by pressingENTER. How to display an internal pattern ? 1. Push the cursor key↑or↓to highlightInternal pattern. (menu 9-16) 2. PressENTERto select. TheInternal patternselection menu will be displayed. (menu 9-17) 3. Push the cursor key↑or↓to highlight the desired pattern. 4. PressENTERto select. The selected pattern will be displayed. 5. PressENTERto scroll through the different patterns available for that type. When the last one is displayed andENTERis pressed, the internal pattern selection box appears. A new pattern can be selected in the same ways as the previous one orEXITcanbepressedandtheprojectorreturnstolast displayed source. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-16 Internal pattern Background Outline Hatch Colorbars Graybars Multiburst Checkerboard Purity Curtain mode Page Character Back Menu 9-17 The curtain mode displays the system uncorrected colors (red, green, blue and white). This pattern can be used to measure the x-y color coordinates of the system (can be used to optimize the projector after lamp replacement). The displayed color is unaffected by the chosen color temperature. 62R5976763 CINEVERSUM 60/70 22042004
9. Installation menu 9.6 When no signal What can be done ? When the projector does not detect an input source, it can be set up to switch automatically to stand by after a certain time which can be set up during installation. ’When no signal’ set up. 1. Push the cursor key↑or↓to highlightWhen no signal. (menu 9-18) 2. PressENTERto select. TheWhen no signalmenu appears. (menu 9-19) 3. Push the cursor key↑or↓to highlightShutdown. 4. PressENTERto toggle betweenONandOFF. ON The projector shuts down after a certain delay. The delay menu item becomes active and can be set up. OFFThe projector remains active and waits until an input signal is back. 5. IsShutdownset toON? If yes, Push the cursor key↑or↓to highlightDelay (min). The Modify delay window opens. (menu 9-20) 6. Use the↑or↓key to enter a new value. The delay can be between 1 and 10 minutes. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-18 When no signal Shutdown : ON Delay (min) : 1 Back Menu 9-19 Modify delay Enter new value : 1 Back Menu 9-20 9.7 Source transition What can be done ? While switching from one source to another, the time between (transition time) can be filled up with a typical background color. Available colors: •Black • Green •Blue R5976763 CINEVERSUM 60/70 22042004 63
9. Installation menu How to set up a source transition ? 1. Push the cursor key↑or↓to highlightSource transition. (menu 9-21) 2. PressENTERto select. TheSource transitionmenu will be displayed. (menu 9-22) An asterisk (*) indicates the actual set up. 3. Push the cursor key↑or↓to highlight the desired transition. 4. PressENTERto select. The asterisk jumps to the selected item. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-21 Source transition * None Black screen Green screen Blue screen Back Menu 9-22 9.8 On Screen Display Configuration OSD On screen display Overview • Menu position • Bar scale status • Bar scale position • Message status 9.8.1 Menu position What can be done ? When a menu is called, it can be displayed in nine different places of the active image. How to position the menu ? 1. Push the cursor key↑or↓to highlightOSD configuration. (menu 9-23) 2. PressENTERto select. The OSD configuration menu will be displayed. (menu 9-24) 3. Push the cursor key↑or↓to highlightVjust belowMenu position. 4. PressENTERto toggle betweenTo p,BottomandCenter. Toggle until the desired vertical position is obtained. 64 R5976763 CINEVERSUM 60/70 22042004
9. Installation menu 5. Push the cursor key↑or↓to highlightHbelowMenu position. 6. PressENTERto toggle betweenLeft,CenterandRight. Toggle until the desired horizontal position is obtained. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-23 OSD configuration Menu position V Top H Left Barscale status Yes Barscale position V Top H Right Message status Yes Back Menu 9-24 9.8.2 Bar scale status What can be done ? The bar scale which appears during some image adjustment such asbrightness control, etc. can be disabled. The adjustment can still be done but no bar scale appears on the screen. E.g., this is sometimes handy when adjusting an image setting during a film. Enabling/disabling the bar scale 1. Push the cursor key↑or↓to highlightOSD configuration. (menu 9-25) 2. PressENTERto select. The OSD configuration menu will be displayed. (menu 9-26) 3. PressENTERto toggle betweenYe sandNo. Yes The bar scale will be displayed each time an image adjustment is called. No No bar scale will be displayed during an image adjustment. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-25 OSD configuration Menu position V Top H Left Barscale status Yes Barscale position V Top H Right Message status Yes Back Menu 9-26 9.8.3 Bar scale position What can be done ? When a function with bar scale adjustment is called, this bar scalecan be displayed on nine different places of the active image. How to position the menu ? 1. Push the cursor key↑or↓to highlightOSD configuration. (menu 9-27) 2. PressENTERto select. The OSD configuration menu will be displayed. (menu 9-28) 3. Push the cursor key↑or↓to highlightVjust belowBarscale position. 4. PressENTERto toggle betweenTo p,BottomandCenter. Toggle until the desired vertical position is obtained. R5976763 CINEVERSUM 60/70 22042004 65
9. Installation menu 5. Push the cursor key↑or↓to highlightHbelowBarscale position. 6. PressENTERto toggle betweenLeft,CenterandRight. Toggle until the desired horizontal position is obtained. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-27 OSD configuration Menu position V Top H Left Barscale status Yes Barscale position V Top H Right Message status Yes Back Menu 9-28 9.8.4 Message status What can be done ? Messages generated by the projector to inform the user about e.g. shutdown, etc. can be disabled. Enabling/disabling messages 1. Push the cursor key↑or↓to highlightOSD configuration. (menu 9-29) 2. PressENTERto select. The OSD configuration menu will be displayed. (menu 9-30) 3. PressENTERto toggle betweenYe sandNo. Yes The messages, when generate by the projector will be displayed. No No messages will be displayed. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-29 OSD configuration Menu position V Top H Left Barscale status Yes Barscale position V Top H Right Message status Yes Back Menu 9-30 9.9 Language support What is possible ? The language of the OSD can be changed to some predefined languages. The following languages are available: • English •German • French • Chinese 66 R5976763 CINEVERSUM 60/70 22042004