Barco Projector Cineversum 70 Quickstart Manual
Have a look at the manual Barco Projector Cineversum 70 Quickstart Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 183 Barco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9. Installation menu How to change the language ? 1. Push the cursor key↑or↓to highlightOSD configuration. (menu 9-31) 2. PressENTERto select. TheLanguageselection menu will be displayed. (menu 9-32) 3. Push the cursor key↑or↓to highlight the desired language. 4. PressENTERto select. The OSD language changes to the selected language. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-31 Language * English Deutsch Français Chinese Back Menu 9-32 9.10 Vertical keystone What can be done ? The Vertical Keystone adjustment is used to align the image geometry, this can be necessary when projecting under a non standard angle. Image 9-1 Vertical keystone correction A Vertical keystone top B Vertical keystone bottom Depending on the Global keystone setting, the vertical keystone adjustment is source specific or is global for all sources. Avoid using the vertical keystone function as this result in a loss of resolution. The reason for this keystone is the inclination of the projector. Check first if it is possible to correct that physically. R5976763 CINEVERSUM 60/70 2204200467
9. Installation menu How to adjust the Vertical keystone ? 1. Push the cursor key↑or↓to highlightV-Keystone. (menu 9-33) 2. PressENTERto select. A bar scale will be displayed. 3. Push the cursor key↑or↓to adjust the vertical keystone. Adjust until the left and right vertical lines are straight. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-33 9.11 Horizontal keystone What can be done ? The Horizontal Keystone adjustment is used to align the imagegeometry, this can be necessary when projecting under a non stan- dard angle. Image 9-2 Horizontal keystone adjustment A Right keystone B Left keystone Depending on the Global keystone setting, the horizontal keystone adjustment is source specific or is global for all sources. Avoid using the horizontal keystone function as this result in a loss of resolution. The reason for this keystone is the inclination of the projector. Check first if it is possible to correct that physically. 68R5976763 CINEVERSUM 60/70 22042004
9. Installation menu How to adjust the Horizontal keystone ? 1. Push the cursor key↑or↓to highlightH-Keystone. (menu 9-34) 2. PressENTERto select. A bar scale will be displayed. 3. Push the cursor key↑or↓to adjust the horizontal keystone. Adjust until the top and bottom horizontal lines are straight. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-34 9.12 Global keystone What can be done ? When global keystone is set to Yes, the actual vertical and horizontal keystone settings will be applied to all sources. When global keystone is set to No, the actual vertical and horizontal keystone settings will be applied only to the actual source. How to set up ? 1. Push the cursor key↑or↓to highlightGlobal keystone. (menu 9-35) 2. PressENTERto select. The global keystone menu will be displayed. (menu 9-36) An asterisk (*) indicates the actual setting. 3. Push the cursor key↑or↓to highlight the desired global keystone setting. Yes Keystone adjustment is global. No Keystone adjustment is only for the active source. 4. PressENTERto select. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-35 Global keystone Yes *No Back Menu 9-36 9.13 Orientation Projector orientation Depending on how the projector is oriented, the projector’s internal settings have to be adapted. R5976763 CINEVERSUM 60/70 22042004 69
9. Installation menu How to set up ? 1. Push the cursor key↑or↓to highlightOrientation. (menu 9-37) 2. PressENTERto select. The orientation menu will be displayed. (menu 9-38) 3. PressENTERto toggle the orientation. Possible orientations : - Front/table : used when the projector is placed in front of the screen on a table. - Front/ceiling : used when the projector is placed in front of the screen but mounted on the ceiling. - Rear/table : used when the projector is placed behind the screen on a table. - Rear/ceiling : used when the projector is placed behind the screen but mounted on the ceiling. Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu 9-37 Orientations Orientations : Front/Table Back Menu 9-38 70R5976763 CINEVERSUM 60/70 22042004
10. Service menus 10. SERVICE MENUS Overview • Service menu overview • Start up the Service menu • Identification screen • Password • IR address • RS232 address • Serial communication • Thermal Diagnosis • I2C Diagnosis 10.1 Service menu overview Overview • Identification • Password • IR address : 000 • RS232 address : 000 • Serial communication • Thermal diagnosis • I2C diagnosis 10.2 Start up the Service menu The service menu can be password protected when the password protection is set to on. How to start up ? 1. PressADJorENTERto start up the main menu. (menu 10-1) 2. Push the cursor key↑or↓to highlightService. 3. PressENTERto select. TheServicemenu will be displayed. (menu 10-2) Main Menu Image settings Advanced settings Installation Service 1. PC 2. RGB/Component 3. DVI 4. SVideo * 5. Video 6. Component Shutdown Back Menu 10-1 Service Identification Password IR address : 000 RS232 address : 000 Serial communication Thermal diagnosis I2C diagnosis Back Menu 10-2 R5976763 CINEVERSUM 60/70 2204200471
10. Service menus 10.3 Identification screen What can be seen on the identification screen? The identification screen shows the general information of the projector. The following items will be displayed: • Type of projector: CineVERSUM 70 • IR address = address used for the remote control • RS address = address used with RS232/422 serial communication • Software version • Baud rate: transfer speed for communication through RS232/RS422 with an external device or computer. The baud rate of the projector must be the same as the baud rate of the connected computer or external device. • Projector Serial number: indicates the fabrication number of the projector. This number can be useful when calling for technical assistance. • Lamp Run Time: gives the total run time since the first start up of this lamp. • Manufacturing date How to display the identification window ? 1. Push the cursor key↑or↓to highlightIdentification. (menu 10-3) 2. PressENTERto select. The Identification window appears. (menu 10-4) Service Identification Password IR address : 000 RS232 address : 000 Serial communication Thermal diagnosis I2C diagnosis Back Menu 10-3 Identification CineVERSUM 70 IR address : 000 RS address : 000 Soft. version : 07A00F22Z Baudrate PC : 19200 Serial number : 6002316 Lamp runtime : 28h Manuf. Date : Apr. 14 2004 Back Menu 10-4 10.4 Password Overview • Enable-disable password • Modify password 10.4.1 Enable-disable password Why password ? With a password it is possible to protect all settings inAdvanced Settings,InstallationandService. When the password is enabled, only person who knows the password can get in. 72 R5976763 CINEVERSUM 60/70 22042004
10. Service menus Enable/disable password 1. Push the cursor key↑or↓to highlightPassword. (menu 10-5) 2. PressENTERto select. The password menu will be displayed. (menu 10-6) 3. Push the cursor key↑or↓to highlightUse password. 4. PressENTERto toggle betweenYe sorNo. Yes Password is enabled No Password is disabled. Free access to all menus. Service Identification Password IR address : 000 RS232 address : 000 Serial communication Thermal diagnosis I2C diagnosis Back Menu 10-5 Password Use password : Yes Modify password Back Menu 10-6 10.4.2 Modify password How to modify 1. Push the cursor key↑or↓to highlightPassword. (menu 10-7) 2. PressENTERto select. The password menu will be displayed. (menu 10-8) 3. Push the cursor key↑or↓to highlightModify password. 4. PressENTERto select. The password modification menu will be displayed. (menu 10-9) The first digit will be highlighted. 5. Push the cursor key↑or↓to change the value. An alphanumeric value can be entered. The following characters can be browsed: digital scroll list : 0123456789 ASCII scroll list : abcdefghijklmnopqrstuvwxyz 6. PressENTERto accept this first character. The second character will be highlighted. 7. Enter in the same way. 8. PressENTERto accept this second character. The third character will be highlighted. R5976763 CINEVERSUM 60/70 22042004 73
10. Service menus 9. Enter in the same way. 10.PressENTERto accept this third character. The new password is entered. It becomes valid after a reboot of the projector. Switch off the projector and switch on again. Service Identification Password IR address : 000 RS232 address : 000 Serial communication Thermal diagnosis I2C diagnosis Back Menu 10-7 Password Use password : Yes Modify password Back Menu 10-8 Modify password Enter new value : 0 Menu 10-9 10.5 IR address Overview An overview of the IR address is given. To change the IR address, see Projector Address, page 29. 10.6 RS232 address How to change ? 1. Push the cursor key↑or↓to highlightRS232 address. (menu 10-10) 2. PressENTERto toggle between000and001. Service Identification Password IR address : 000 RS232 address : 000 Serial communication Thermal diagnosis I2C diagnosis Back Menu 10-10 10.7 Serial communication Overview • Baudrate setup • Serial communication interface selection 10.7.1 Baudrate setup About Baudrate The baudrate is the communications speed used for communication between the projector and the external computer. The baudrate setting of the projector must be the same as those of the computer. 74 R5976763 CINEVERSUM 60/70 22042004
10. Service menus How to setup 1. Push the cursor key↑or↓to highlightSerial Communication. (menu 10-11) 2. PressENTERto select. The Serial communication menu will be displayed. (menu 10-12) 3. Push the cursor key↑or↓to highlightBaudrate PC. 4. PressENTERto toggle between the different possible baudrates. The following baudrates are available : - 1200 - 4800 - 9600 - 19200 Service Identification Password IR address : 000 RS232 address : 000 Serial communication Thermal diagnosis I2C diagnosis Back Menu 10-11 Serial communication Baudrate PC : 19200 Interface : RS232 Back Menu 10-12 10.7.2 Serial communication interface selection About interface selection The serial port of the projector can accept serial communication via the RS232 protocol or via the RS422 protocol. The protocol type must be setup. RS232 An Electronic Industries Association (EIA) serial digital interface standard specifying the characteristics of the com- munication path between two devices using either DB-9 orDB-25 connectors. This standard is used for relatively short-range communications and does not specify balanced control lines. RS-232 is a serial control standard with a set number of conductors, data rate, word length and type ofconnector to be used. The standard specifies component connection standards with regard to computer interface. It is also called RS-232-C, which is the third version of the RS-232 standard, and is functionally identical to the CCITTV.24 standard. Logical ’0’ is > + 3V, Logical ’1’ is < - 3V. The range between -3V and +3V is a the transition zone. RS422 An EIA serial digital interface standard that specifies the electrical characteristics of balanced (differential) voltage, digital interface circuits. This standard is usable over longer distances than RS-232. This signal governs the asyn- chronous transmission of computer data at speeds of up to920,000 bits per second. It is also used as the serial port standard for Macintosh computers. When the differencebetween the 2 lines is < - 0.2V that equals with a logical ’0’. When the difference is > +0.2V that equals to a logical ’1’.. R5976763 CINEVERSUM 60/70 2204200475
10. Service menus How to set up ? 1. Push the cursor key↑or↓to highlightSerial Communication. (menu 10-13) 2. PressENTERto select. The Serial communication menu will be displayed. (menu 10-14) 3. PressENTERto toggle betweenRS232andRS422. Service Identification Password IR address : 000 RS232 address : 000 Serial communication Thermal diagnosis I2C diagnosis Back Menu 10-13 Serial communication Baudrate PC : 19200 Interface : RS232 Back Menu 10-14 10.8 Thermal Diagnosis About thermal diagnosis This menu gives an overview of the fan speeds and if they work normal. It gives also the internal ambient temperature and the temperature of the DMD. How to get an overview ? 1. Push the cursor key↑or↓to highlightThermal diagnosis. (menu 10-15) 2. PressENTERto select. TheThermal diagnosismenu will be displayed. (menu 10-16) Service Identification Password IR address : 000 RS232 address : 000 Serial communication Thermal diagnosis I2C diagnosis Back Menu 10-15 Thermal diagnosis Fan 1 1687 RPM Fan 2 1028 RPM Fan 3 1687 RPM Fan 4 Normal Fan 5 Normal Fan 6 Normal T_amb 39°C T_DMD 45°C Back Menu 10-16 10.9 I2C Diagnosis How to display ? 1. Push the cursor key↑or↓to highlightI2C diagnosis. (menu 10-17) 2. PressENTERto select. TheI2C diagnosismenu will be displayed. (menu 10-18) Service Identification Password IR address : 000 RS232 address : 000 Serial communication Thermal diagnosis I2C diagnosis Back Menu 10-17 I2C diagnosis DDP1010 0x34 – + + Thermal 0x5A + + + Thermal 0x58 + + + ADC 0x9A + + + Deiter 0x64 + + + VDC 0x42 + + + Back Menu 10-18 76R5976763 CINEVERSUM 60/70 22042004