Barco Projector Cineversum 70 Quickstart Manual

2. Installation Guidelines
2. INSTALLATION GUIDELINES
Overview
• Safety Warnings
• General
• Projector Configuration and Position
• Safety Area around projector
• Cleaning the lens
• Vertical lens shift
• Battery Insertion in the Remote Control
• Ceiling Mount assembly
Before installing the projector, read first the safety instructions in the safety manual delivered with the pro-
jector and also the safety pages in this manual.
2.1 Safety Warnings
Mercury Vapor Warnings
Keep the following warnings in...

2. Installation Guidelines
Only ever use the manufacturer’s recommended cleaning kit which has been specifically designed for cleaning optical parts, never
use industrial strength cleaners on the projector’s optics as thesewill degrade optical coatings and damage sensitive optoelectronics
components. Failure to take suitable precautions to protect the projector from the effects of persistent and prolonged air contam-
inants will culminate in extensive and irreversible ingrained optical damage. At this...

2. Installation Guidelines
Try to avoid an inclination of the projector (forwards, backwards, to the left or to the right) as this will result in
a keystone deformation of the image. This deformation can be corrected with the keystone function but with
a loss of resolution as result.
The drawing is given for a table mounted projector. The same is valid for a ceiling mounted projector.
PD
V1
V2
V3SH
CD
B
C
SWPD
Image 2-1
Table mounted configuration
V1 Side view
V2 Top view
V3 Back view
PD Distance...

2. Installation Guidelines
For CineVERSUM 60:
LensPDCD
1.7 - 2.25Wide : PD = 1.7 x SW
Tele : PD = 2.25 x SWCD=B+C-5.9cm
2.25 - 3Wide : PD = 2.25 x SW
Te l e : P D = 3 x S WCD=B+C-5.9cm
With C = 0.23 x SH
2.4 Safety Area around projector
Safety area
Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed. Leave at least 50 cm
between the projector and an object next to the projector.
A
B
Image 2-2
Do not place inflammable materials within the safety...

2. Installation Guidelines
Other lenses can also be cleaned safely with this TorayseeTMcloth.
2.6 Vertical lens shift
What can be done ?
The image can be shifted in a vertical way to position the image correctly on the screen.
Necessary tools
Spanner delivered in the package
How to shift the lens ?
1. Turn the lens shift bolt on the bottom side of the projector, just below the lens, until the desired image position is obtained.
(image 2-3)
When table mounted, turning to the left (clockwise) will shift...

2. Installation Guidelines
Vertical lens shift ranges
A
B
SH
SH
Image 2-4
Vertical lens shift
The distance between the middle of the projected image and the perpendicular line from the projector.
For CineVERSUM 60 :
• A = 0.275 x SH
•B=0.86xSH
For CineVERSUM 70 :
•A=0.24xSH
• B = 0.625 x SH
2.7 Battery Insertion in the Remote Control
Where to find the batteries
The batteries are not placed in the remote control to avoid remote control operation in its package, resulting in a shorter battery life
time....

2. Installation Guidelines
Image 2-5
Battery cover unlock
Image 2-6
Battery cover removal
Image 2-7
Battery removal
2.8 Ceiling Mount assembly
Overview
Aceiling mount is available to mount the projector to the ceiling. Always use this ceiling mount.
Order number : R9852060
For a more detailed description on how to mount the ceiling mount, consult the ceiling mount installation manual (R5976750) which
can be found in the box of the ceiling mount assembly or separately ordered by Barco.
R5976763 CINEVERSUM...

2. Installation Guidelines
14R5976763 CINEVERSUM 60/70 22042004 

3. Connections
3. CONNECTIONS
Overview
• Removing the Connector cover
• Power Connection
• Input facilities
• S-Video input
• Composite Video input
• 5-Cable input
• Component Input
• Digital Visual Interface (DVI) input
• Computer input (RGB analog)
• RS232-422 IN connection
• Trigger outputs
3.1 Removing the Connector cover
What is behind this cover ?
The power connector and all inputs are situated behind this cover.
How to remove the cover ?
1. Loosen the locking screw. (image 3-1)
2. Left up at the...

3. Connections
ASPECT
RATIO
12V TRIGGERSCREENS-VIDEO VIDEO VHR/PrB/Pb
G/Y
Pr Pb Y
RS232/RS422
IN CONTROL
DVI INPUT
VGA INPUT COMPONENT VIDEO INPUT RGB/COMPONENT INPUT
Image 3-2
The power input is auto-ranging from 90 to 240 VAC.
About the power cord
Mainslead(ACPowercord)withCEE7plugupto16A
The colors of the mains lead are colored in accordance with the following code:
• Green-and-yellow: Earth (safety earth)
• Blue: Neutral
•Brown:Line
3.3 Input facilities
Overview
•S-Video
• Video
• 5 cable input on...