Barco Projector Cineversum 70 Quickstart Manual

4. Getting Started
No.Key nameDescription
9*Aspect ratio button. Opens the selection menu for the aspect ratio.
10FREEZEpress to freeze the projected image.
11TEXTto des-activate or activate the on screen slide bars.
12ENTERto confirm an adjustment or selection in a menu..
Entering the adjustment mode is also possible.
13Cursor keysCursor Keys on RCU : to make item selections in a menu box or to adjust a function when a
slide bar is vissible.
14EXITto leave the selected menu box or item (go upwards to...

4. Getting Started
4.4 Switching from operational mode to standby
Howtoswitchtostandby
1. Press the standby button on the remote control for 2 seconds.
A message : “Power down appears”.
Projector goes into standby. Standby LED blinks. After a while, the fans stop blowing and the projector switch off automatically.
4.5 Switching off the projector
Howtoswitchtooff
1. Press the standby button on the remote control for 2 seconds.
A message : Power down appears.
Projector goes into standby. Standby LED...

4. Getting Started
-+-+-+-+-+-+-+-+-+-+
ADJ
EX
IT
ENT
E
R
P
AUS
ETEX
T
?
P
HASE
SHA
RP
N
BRI
GHT
N
CON
TR
BAS
S T
RE
B
L
E
BAL
A
NCETIN
T
CO
L
O
R
F1F2F4F5F3
90
78563412
-+-+-+-+-+-+-+-+-+-+
A
D
J
EX
I
T
E
N
T
E
R
P
AU
S
E
T
EX
T
?P
H
A
S
E
S
H
A
R
P
N
B
R
I
G
H
TN
CO
N
T
R
B
A
S
S T
R
E
B
L
E
V
O
L B
A
L
A
N
C
E
T
I
N
T
CO
L
O
R
F
1F
2F
4F
5F
3
9
07
85
63
41
2
4545
Image 4-4
Direct using of the RCU
Backlighting
When a button is pressed on the RCU, backlight is activated automatically. That allows the...

4. Getting Started
The following key numbers are valid :
1. PC source
2. RGB/Component source (5 RCA input)
3. DVI
4. S-Video
5. Video
6. Component (3 RCA)
Picture Controls
When an image control is pressed, a text box with a bar scale and function name of the control, e.g. ’brightness...’ appears on
the screen (only ifBarscale statusisYe s). The length of the bar scale and the value of the numeric indication indicate the current
memorized setting for this source. The bar scale changes as the arrows on...

5. Getting used to the menu structure
5. GETTING USED TO THE MENU STRUCTURE
Overview
• How to start up the menus
• How to use the menus
• How to make an adjustment
• Access Control via a password
5.1 How to start up the menus
Box like menu structure
The menu structure is built up with boxes which allow easy access to different parameters for setting up the projector.
A menu box item can generate at its turn a menu box or it can generate an adjustment box such as a slide bar.
How to activate the menu...

5. Getting used to the menu structure
When no action is taken within a few seconds while a menu box or slide bar is displayed, the projector quits
the menu structure or slide bar (adjustment).
The menus inserted in this manual are always full menus: all the items are visible.
Greyed out menu items are not available for the current selected source or current software version.
5.3 How to make an adjustment
How to perform ?
1. Use the arrow keys to adjust the selected control.
The following keys are mostly...

6. Source Selection
6. SOURCE SELECTION
Overview
• Selecting a source
6.1 Selecting a source
How to select
1. PressADJorENTERto start up the Main menu. (menu 6-1)
An asterisk (*) is displayed before the actual selected source.
2. Push the cursor key↑or↓to highlight the desired source, e.g. 4. SVideo.
3. PressENTERto select.
When the source is available, it will be selected. A dialog box appears with the message “Calibrating input ...”
Main Menu
Image settings
Advanced settings
Installation
Service
1. PC...

6. Source Selection
34R5976763 CINEVERSUM 60/70 22042004 

7. Image Settings menu
7. IMAGE SETTINGS MENU
Overview
• Image settings menu overview
• Starting the Image settings menu
• Brightness
• Contrast
• Saturation
• Tint (hue)
• Sharpness
• Gamma
• Color Temperature
• White peak
7.1 Image settings menu overview
Overview
• Brightness
• Contrast
• Saturation
•Tint
• Sharpness
• Gamma
• Color Temperature
- Predefined color temperatures
- Custom color balance
- Color standard
• White peak
7.2 Starting the Image settings menu
How to start up ?
1. PressADJorENTERto...

7. Image Settings menu
7.3 Brightness
About brightness
The brightness function is used to adjust the overall light output.
How to change the brightness ?
1. Push the cursor key↑or↓to highlightBrightness. (menu 7-3)
2. PressENTERto select.
A slider box appears.
3. Use the cursor keys to adjust the brightness setting.
↑or→key for higher brightness (higher values).
↓or←key for lower brightness (lower values).
Image settings
Brightness
Contrast
Saturation
Tint
Sharpness
Gamma
Color temperature
White peak...