Barco Projector Cineversum 120 Quickstart Manual

7. Connections
Input modeSignal format (1), (2), (3) or (4) selectable on the GUI menu
Bandwidth500 MHz RGB Analog Bandwidth convertor
Signal supportSupports signals up to 205 MHz Pixel clock (1600 x 1200 @ 75 Hz)
Sync DetectionAutomatic Sync detection for: RGBHV, RGBS and RGsB.
Sync PolarityAutomatic Sync Polarity detection
Input signal level
RGsB Input ModeRGB signal: 0.7Vpp
Composite Video Sync on G: 1Vpp
RGBS Input ModeRGB signal: 0.7Vpp
Composite Video Sync on H: 1Vpp
RGB/HV Input ModeRGB signal:...

7. Connections
Features- Loop through HD-SDI Input (HD-SDI in/HD-SDI out)
- For HD-DVD players and other HD Video equipment with HD-SDI out.
Digital Visual Interface Input (DVI)
DVI: Digital Visual Interface is a display interface developed in repose to the proliferation of digital flat panels
displays. It uses a high speed serial interface with TMDS (Transition Minimized differential signalling) to send
data to the display. DVI can be single or dual link.
Image 7-25
DVI input module
with DVI-D type...

7. Connections
Image 7-27
Image 7-28
Image 7-29
R5976468 CINE VERSUM SYSTEM 0311200359 

7. Connections
60R5976468 CINE VERSUM SYSTEM 03112003 

8. Operating the Remote Control
8. OPERATING THE REMOTE CONTROL
Overview
• Battery Insertion in the Remote Control
• Operating the Remote Control
• Address setting for the Remote Control
8.1 Battery Insertion in the Remote Control
– Insert batteries so that the plus (+) and minus (-) sides are aligned according to the markings in the battery
case.
– Do not mix new batteries with used ones.
– The voltage of batteries may differ even if they are the same shape. Please do not mix different kinds of...

8. Operating the Remote Control
Image 8-3
Battery removal
8.2 Operating the Remote Control
Remote Control operation
This remote control includes a battery powered infrared transmitter which allows the user to control the Cine VERSUM Master re-
motely via its own built-in infrared receiver or via the infrared receivers built-in in the linked displays.
If backlight and RC operation indicator lights up too long or continuously, batteries need to be replaced.
F1F2F3
F4
F5
ADJ EXIT
ENT ER
PA USE
PHAS E TEXT
S...

8. Operating the Remote Control
Remote control operation’s difficulties
• The remote control unit may not operate if there are objects placed between it and the display.
• Operational distances will gradually become shorter as the batteries begin to wear out, replace weak batteries with new ones
as soon as possible.
• Depending on the installation surroundings, this unit’s remote control may be influenced by the infrared rays discharged from
the plasma display, hampering reception of its rays or limiting...

8. Operating the Remote Control
64R5976468 CINE VERSUM SYSTEM 03112003 

9. Points of Similarity between Graphical display and On Screen Menus
9. POINTS OF SIMILARITY BETWEEN GRAPHICAL
DISPLAY AND ON SCREEN MENUS
9.1 Explanation about differences in menu displays
Purpose
The different adjustment items are structured in main and sub menus. The way of showing the menus is different between the Cine
VERSUM Master and the linked displays, but the subject matter of the menus is similar. Below a summary of the most important
differences:
Graphical display on Cine VERSUM Master
On...

9. Points of Similarity between Graphical display and On Screen Menus
CineVERSUM
7 xga75_gs.c03  Image settings
  Advanced Settings
>Installation
  Service
  1 NO MODULE
  2 NO MODULE
  3 VIDEO [VIDEO]
  4 NO MODULE
  5 NO MODULE
  6 NO MODULE
  7 RGB -YUV [RGB]
  8 NO MODULE
  Shutdown
Back
Graphical Display
on Cine VERSUM MasterOn Screen Display
CV50, CV80 and CV120
Main  menuMain  menu
    Cine VERSUM
Image settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO...