Barco Projector Cineversum 120 Quickstart Manual

16. Input Source File Service
16. INPUT SOURCE FILE SERVICE
Overview
• About Stored files
• Loading a File
• Editing a File
• File identification
• Rename a file
• Copy a file
• Delete a file
• Delete all files
• File options
16.1 About Stored files
Cine VERSUM Master memory
The Master’s memory contains a list of files corresponding to the most used sources. When the Master starts up (with active con-
nected sources to the input modules), the input signals are scanned and compared with an already stored...

16. Input Source File Service
4. Select item FILE SERVICE by rotating the selection wheel on the Master or the up/down arrow keys on the Remote Control
(menu 16-2).
5. Press the selection wheel on the Master or the key ENTER on the Remote Control to confirm.
The sub menu FILE SERVICE appears on-screen and in the graphical display. (menu 16-3)
Cine VERSUM System
Image Settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV...

16. Input Source File Service
16.3 Editing a File
How to Edit a File
1. Select the FILE SERVICE menu (see Loading a File, page 97)
2. Select item EDIT by rotating the selection wheel on the Master or the up/down arrow keys on the Remote Control.
The sub menu EDIT FILE (menu 16-7) appears on-screen and in the graphical display. This menu allows to choose between 2
lists, Active file and Select File.
Active FileFile associated to the selected input module. When selecting Active File, the editing
menu opens...

16. Input Source File Service
Explanation of the Edit file menu items
Menu ItemExplanation
Horizontal Total PixelsIf the value for ’Horizontal Total pixels’ is wrong,sampling mistakes, small vertical bars will be seen
in the image (Total numbers of pixels between 2 sync pulses is used to adjust the sampling rate).
Select ’Total’ and increase or decrease the pixel quantity for no bars in the image. (image 16-4)
Active pixelsThe ’Active pixels’ determine the width of the window on the screen. This value is...

16. Input Source File Service
Option ItemExplanation
Vertical Synchro
PolarityThe vertical refresh can be synchronized with the leading or trailing sync edge. Default setting is
[Leading]. Toggling to [Trailing] is only necessary for special applications where the trailing edge
of the synchro signal has to be taken as a reference. Use theENTERkey to toggle between
Leading and Trailing.
Film mode detection:
[On] or [Off]Detects in the [on] mode if the source is film or video. Use theENTERkey to toggle...

16. Input Source File Service
Artefacts
Undesirable elements or defects in a video picture. These may occur naturally in the video process and must be
eliminated in order to achieve a high-quality picture. Most common in analog are cross color and cross luminance.
Most common in digital are macroblocks, which resemble pixelation of the video image.
16.5 Rename a file
How to rename a file
1. Select the FILE SERVICE menu (Loading a File, page 97).
2. Select item RENAME by rotating the selection wheel on...

16. Input Source File Service
5. Continue with filling in the other characters consecutively as follows:
- Pressing the cursor keys↑or↓on the Remote Control or rotating the selection wheel on the Master allows to select the
characters.
- Pressing the cursor keys←or→on the Remote Control or pressing the selection wheel on the Master allows to change the
character ( Numeric characters can be entered remotely with the numeric keys).
6. At the end of the file name, a message box pops up, asking to confirm...

16. Input Source File Service
16.8 Delete all files
How to delete ALL files
1. Select the FILE SERVICE menu (see Loading a File, page 97
2. Select item DELETE ALL by rotating the selection wheel on the Master or the↑or↓keys on the Remote Control.
A confirmation request menu appears on-screen and in the graphical display. (menu 16-17)
3. Select menu item Yes or No, and press ENTER on the Remote Control or press the selection wheel on the Master to confirm:
Menu itemResult
NoSystem returns to FILE SERVICE...

17. Adjusting the Picture
17. ADJUSTING THE PICTURE
Overview
• Setup Video and RGB module for the input signal type
• Adjusting the Image Orientation
• Adjusting the Image Aspect Ratio
• Adjusting the Decoding Standard
• White Peak Set up
• Keystone Correction
• Adjusting the Image Shift and Size
• Outline the displayed Image (Blanking)
• Alignment of the Input Balance
• Phase adjustment for Computer signals
• Gamma Correction
• Adjusting the Color Temperature
• Adjusting the Picture Controls
17.1 Setup...

17. Adjusting the Picture
8. Repeat the same action for all installed Video and RGB modules.
9. Leave the GUI menus:
- Using the jog dial on the Master: scroll in the menu to the bottom until item ’Back’ is pointed and press to confirm. Repeat the
same action if necessary.
- Using the Remote Control: press theEXITkey to leave the menus consecutively or press theADJkey to leave the menus
at once.
Cine VERSUM System
Image Settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO...