Barco Projector Cineversum 110 Quickstart Manual

							7. General Menu
Image 7-4
Standby timer
Countdown to  
sec Enabled 
Disabled
0
Image 7-5
7.5 Identification
The projector’s identification screen
The identification screen displays the projector’s main characteristics
These are:
• Projector type
• Projector address
• Software version controller unit
• Serial number of projector
How to display the identification screen ?
1. PressMENUto activatethe menu bar.
2. Press→to selectGeneral.
3. Press↓to pull down the General menu.
4. Use↑or↓to selectIdentification. (image 7-6)
5. PressENTERto activate the function.
The Identification screen will be displayed. (image 7-7)
6. PressMENUorBACKto exitor to go back to the previous menu
Image 7-6
Identification
Type
Address
Software
RS232 baudrate
Serial numberCineVersum
5
01.00
115200
1234567
Image 7-7
R5976697 CINEVERSUM™ 110 12/05/200457 
						

							7. General Menu
58R5976697 CINEVERSUM™ 110 12/05/2004 
						

							8. Image Menu
8. IMAGE MENU
Overview
• Image menu overview
• Settings
• Aspect ratio
• Show native resolution
• Color Temperature
• Color space
• Filmmode detection
• Input Balance
• AGC on Video
• Manual Gain Control
R5976697 CINEVERSUM™ 110 12/05/2004
59 
						

							8. Image Menu
8.1 Image menu overview
Overview
• Settings
- Contrast
- Brightness
-Color
-Tint
- Sharpness
- Gamma
-Phase
- Noise Reduction
• Aspect ratio
-Auto
- [4:3]
- [16:9]
- [5:4]
- [2.35]
- [2.88]
- [1.78]
- Letterbox
- Custom...
• Show native resolution
-On
-Off
• Keystone...
• Color temperature
- Projector white
- Computer
- Video
-Film
- Broadcast
- Custom...
• Color space
- EBU
-ANSI
-Projector
- Custom...
• Film mode detection
-On
-Off
• Input Balance
-Black..
- White...
-Preset
• AGC on Video
-On
-Off
• Manual Gain Control...
60
R5976697 CINEVERSUM™ 110 12/05/2004 
						

							8. Image Menu
8.2 Settings
Overview
• Contrast
• Brightness
• Color
• Tint (hue)
• Sharpness
• Gamma
• Phase
• Noise reduction
What can be done ?
Correct image settings are important for a good image reproduction.
The image settings are made through a dialog box with a scroll bar. Minimal, maximal and the actual values are indicated. Some
settings can also be done directly via the RCU’s dedicated buttons.
Image 8-1
Brightness
20
0
100
Image 8-2
Image settings slider box
8.2.1 Contrast
About Contrast
The contrast function is used to adjust the contrast between the light and dark areas of the displayed image.
How to change the contrast
1. PressMENUto activate the menu bar. (image 8-3)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↑or↓to selectContrast.
R5976697 CINEVERSUM™ 110 12/05/2004
61 
						

							8. Image Menu
7. PressENTER.
A slider box appears.
8. Use←or→to change the contrast.
The higher the value, the higher the contrast.
Or,
click in the input box and enter the desired value with the numeric keys.
Image 8-3
8.2.2 Brightness
About Brightness
The Brightness function is used to adjust the overall light output.
How to change the Brightness ?
1. PressMENUto activate the menu bar. (image 8-4)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to selectBrightness.
7. PressENTER
A slider box appears.
8. Use←or→to change the brightness.
The higher the value, the higher the brightness.
Or,
click in the input box and enter the desired value with the numeric keys.
62
R5976697 CINEVERSUM™ 110 12/05/2004 
						

							8. Image Menu
Image 8-4
8.2.3 Color
About Color setting
The color function is used to adjust color saturation levels.
How to change the Color ?
1. PressMENUto activate the menu bar. (image 8-5)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to selectColor.
7. PressENTER.
A slider box appears.
8. Use←or→to change the color.
The higher the value, the higher the color.
Or,
click in the input box and enter the desired value with the numerickeys.
Image 8-5
R5976697 CINEVERSUM™ 110 12/05/200463 
						

							8. Image Menu
8.2.4 Tint (hue)
About Tint
The Tint function is used to adjust color hue to obtain true color reproduction and is only active for Video and S-Video when the
NTSC color system is used. For PAL and SECAM sources, Tint is not accessible.
How to change the Tint ?
1. PressMENUto activate the menu bar. (image 8-6)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to selectTint.
7. PressENTER.
A slider box appears.
8. Use←or→to change the tint.
The higher the value, the higher the tint.
Or,
click in the input box and enter the desired value with the numeric keys.
Image 8-6
8.2.5 Sharpness
About Sharpness
The sharpness function is used to adjust the image sharpness of video signals.
How to change the sharpness ?
1. PressMENUto activate the menu bar. (image 8-7)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to selectSharpness.
7. PressENTER.
A slider box appears.
8. Use←or→to change the sharpness.
The higher the value, the higher the sharpness.
Or,
click in the input box and enter the desired value with the numeric keys.
64
R5976697 CINEVERSUM™ 110 12/05/2004 
						

							8. Image Menu
Image 8-7
8.2.6 Gamma
About Gamma
Gamma is an image quality enhancement function that offers a richer image by brightening the already darker portions of the image
without altering the brightness of the brighter portions (contrast feeling enhanced).
How to change the Gamma
1. PressMENUto activate the menu bar. (image 8-8)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to selectGamma.
7. PressENTER.
A slider box appears.
8. Use←or→to change the gamma value.
Or,
click in the input box and enter the desired value with the numeric keys.
Note:Default value of gamma : 2.2
Image 8-8
R5976697 CINEVERSUM™ 110 12/05/200465 
						

							8. Image Menu
8.2.7 Phase
About Phase adjustment
When displaying computer patterns or graphics (RGB or YUV signals) which are very detailed (tilting, vertical stripes, etc. ), jitter
in picture (mis-sampling) may occur, causing horizontal stripes in portions of the screen. When this jitter occurs, adjust ’Phase’ for
optimum image.
Image 8-9
Jittering on image
How to change the Phase ?
1. PressMENUto activate the menu bar. (image 8-10)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to selectPhase.
7. PressENTER.
A slider box appears.
8. Use←or→to change the Phase and refine the jitter.
Or,
click in the input box and enter the desired value with the numeric keys.
Note:Don’t mix up with wrong number of total pixels. If the jitterdoesn’t disappear with the phase adjustment, check the total
number of pixels. (Best image = pixel on pixel off pattern. For example: shut down screen of a PC)
Image 8-10
8.2.8 Noise reduction
About Noise reduction
Reduces noise and pixel jitter in all video sources.
66
R5976697 CINEVERSUM™ 110 12/05/2004