Barco Projector Cineversum 110 Quickstart Manual

							5. Getting used with the Menu structure
In some cases an alphanumeric value (file name, ...) has to be entered. Use↑or↓to scroll through the char-
acter values once the input field is activated.
Following characters can be browsed in this particular order:
Decimal scroll list: 0123456789
Signed decimal scroll list: 0123456789-
ASCII scrolllist:ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789+-*/&@#.;.abcdefghijklmnopqrstuvwxyz
R5976697 CINEVERSUM™ 110 12/05/200447 
						

							5. Getting used with the Menu structure
48R5976697 CINEVERSUM™ 110 12/05/2004 
						

							6. Source Selection
6. SOURCE SELECTION
Overview
• Source Selection overview
• The use of icons
• Source selection
• Selecting a data source on the 5-cable input
• Composite Video
• S-Video selection
• The Video Selector
6.1 Source Selection overview
Source selection overview
•DataonBNC’s
• Component Video
• RG(s)B Video
•PC
• Composite Video
- Video
- Video VS
- Video R
- Video G
- Video B
- Video Y
- Video C
•S-Video
- S-Video 1
- S-Video 2
- S-Video 3
•DVI
•SDI
• Logo
• Video selector...
6.2 The use of icons
Overview
A Barco logo in front of a menu item indicates the presence of a signal at the input.
The digit icon in front of an item, indicates the shortcut key on the RCU.
6.3 Source selection
Selecting a source
The Source selection menu allows to select one of the different sources. Another method to select an input source is via the remote
control using the numeric keys or by using the local keypad.
R5976697 CINEVERSUM™ 110 12/05/2004
49 
						

							6. Source Selection
How to select a source ?
1. PressMENUto activate the menu bar.
2. Press↓to pull down the Source Selection menu.
3. Use↑or↓to select one of the different sources (Press→to pull down if the item has a submenu).
4. PressENTERto confirm your choice.
On the screen appears now the selected source with at the same time for a few seconds a text box with source information.
(image 6-1)
Video source 1
Video
Video625.c06
Image 6-1
Source indication
6.4 Selecting a data source on the 5-cable input
What can be connected to the 5-cable input
The following source can be connected to the 5-cable input in normal mode:
•DataonBNC’s
• Component Video
•RG(s)B
The position of the icon “1” will always indicate which BNC configuration is selected.
How to set the correct source
1. PressMENUto activate the menu bar.
2. Press↓to pull down the Source Selection menu.
3. Use↑or↓to select one of the 3 possible sources. (image 6-2)
When to select :
DATA on BNC’s When a data signal is connected to the BNC’s
Component Video When a video signal of the type (PR/Y/PB) is connected on the BNC’s
RG(s)B Video When RGB video signal with Sync on green or sync on H is connected on the BNC’s.
This signal is routed to the video circuit and is projected in a Video Window.
Image 6-2
50R5976697 CINEVERSUM™ 110 12/05/2004 
						

							6. Source Selection
When selecting “1” with the remote control, the predefined source type will be displayed.
6.5 Composite Video
Possible connections
In normal mode, one video source can be connected to the video input.
In extended mode, up to 7 different video sources can be connected to the normal video input, or to the extended 5-cable input or
to the S-Video.
When the extended mode is not switched on, the on screen menu will have another layout with less selection
possibilities.
How to select one of 7 different composite video inputs when in extended mode
1. PressMENUto activate the menu bar.
2. Press↓to pull down the Source Selection menu.
3. Use↑or↓to selectComposite video.
4. Press→to pull down the submenu.
5. Use↑or↓to select one of the different video inputs. (image 6-3)
6. PressENTERto confirm your choice.
A white bullet will indicate the selected composite video source. This source will be displayed on the screen.
Image 6-3
The composite video sources can also be selected using the video selector or via the dedicated key 3 on the
RCU. Key 3 allows to browse through the active video inputs when the extended mode is checked in Video
Selector..
Multiple video signals cannot be visualized simultaneously since there is only one decoder.
R5976697 CINEVERSUM™ 110 12/05/200451 
						

							6. Source Selection
6.6 S-Video selection
When the extended mode is not switched on, the on screen menu will have another layout with less selection
possibilities.
How to select one of the 3 S-Video inputs ?
1. PressMENUto activate the menu bar.
2. Press↓to pull down the Source Selection menu.
3. Use↑or↓to selectS-Video.
4. Press→to pull down the submenu.
5. Use↑or↓to select one of the different S-Video inputs. (image 6-4)
6. PressENTERto confirm your choice.
A white bullet indicates the selected S-Video source. This source will be displayed on the screen.
Image 6-4
The S-Video sources can also be selected using the video selector or via the dedicated key 4 on the RCU. Key
4 allows to browse through the active S-Video inputs when the extended mode is checked in Video Selector.
6.7 The Video Selector
Video Selector
The Video Selector is a graphical interface which allows an overview of the different video inputs (Composite Video
and S-Video) and whether they are active (signal connected) or not as well as the selection of these different signals.
Video selector modes
The video selector has two modes:
• standard mode : the video selectable video inputs are the standard composite video & S-Video input
• extended mode : several BNC connections are added and can be selected as video inputs or S-Video inputs.
How to switch the mode
1. PressMENUto activate the menu bar.
2. Press↓to pull down the Source Selection menu.
3. Use↑or↓to selectVideo selector....(image6-5)
A message will be displayed and followed by a graphical user interface.
52
R5976697 CINEVERSUM™ 110 12/05/2004 
						

							6. Source Selection
4. Use the arrow keys to select the Extended check box.
5. PressENTERto disable or enable the extended mode.
CheckExtendedto switch to extended mode.
UncheckExtendedto switch to standard mode.
Image 6-5
How to select an input on the Video Selector
1. Use←or→to browse through the different inputs.
2. PressENTERto select.
UseMENUorBACKto exit the Video Selector.
Graphical interface
B
C
D
E
AA
B
C
D
E
Image 6-6
A BNC or S-Video connector on the video selector can be in one of following conditions:
• A: connector disabled
• B: connector enabled but inactive (no video signal present on connector)
• C: connector enabled & active (video signal present on connector)
• D: connector enabled active & selected
• E: connector enabled & active & focused (browser positioned on connector)
A source can also be selected via the dedicated key 9 on the RCU. Key 9 allows to browse through the active
inputs.
R5976697 CINEVERSUM™ 110 12/05/200453 
						

							6. Source Selection
54R5976697 CINEVERSUM™ 110 12/05/2004 
						

							7. General Menu
7. GENERAL MENU
Overview
• General Menu overview
• Pause
• Freeze
• Standby Timer
• Identification
7.1 General Menu overview
General Menu structure
• Pause
• Freeze
• Standby timer...
• Identification
7.2 Pause
Interrupting the image projection
With the Pause function, the image projection can be stopped (black image), the projector remains with full power for immediate
restart.
How to interrupt the image projection ?
1. PressMENUto activate the menu bar.
2. Press→to selectGeneral.
3. Press↓to pull down the General menu.
4. Use↑or↓to selectPause.(image7-1)
5. PressENTERto activate the Pause function.
Image 7-1
The image projection can also be interrupted using the PAUSE key on the RCU.
To restart the image : press PAUSE.
7.3 Freeze
Freezing the image
With the Freeze function, the image can be frozen. To restart the image, reuse the Freeze function or press theFREEZEbutton on
the remote control.
R5976697 CINEVERSUM™ 110 12/05/2004
55 
						

							7. General Menu
Howtofreezetheimage?
1. PressMENUto activate the menu bar.
2. Press→to selectGeneral.
3. Press↓to pull down the General menu.
4. Use↑or↓to selectFreeze. (image 7-2)
5. PressENTERto activate the Freeze function.
Image 7-2
The image can also be frozen using the FREEZE key on the RCU.
7.4 Standby Timer
Purpose of the Standby Timer
If there is no signal, and the standby timer is enabled, a dialog box is displayed and the projector will shut down after a determined
time.
Message
No signal available
Projector will go to standby
Press  to cancel
1:20
Image 7-3
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the standby timer ?
1. PressMENUto activate the menu bar.
2. Press→to selectGeneral.
3. Press↓to pull down the General menu.
4. Use↑or↓to selectStandby Timer.(image7-4)
5. PressENTERto activate the function.
On the screen appears a dialog box. (image 7-5)
6. Use↑or↓to selectEnabled.
A box surrounds the selected item.
7. PressENTERto activate.
8. Use↑or↓to browse to the input field.
9. Use←or→, the numeric keys on the remote or the keypad to change the countdown setting.
10.PressMENUorBACKto exit or to go back to the previous menu.
56
R5976697 CINEVERSUM™ 110 12/05/2004