Barco Projector Cineversum 110 Quickstart Manual

							12. Image Files Menu
Edit custom file
Video625.c01
Video625.c02
Active files:
Video625.c01
Image 12-6
Edit custom file
Name
Horizontal:
Vertical:
680
20
0
560
8 576720
AdvancedVideo625.c01
total
active
start
period
total
active
start
Image 12-7
It is recommended to use the default values.
12.5.2 Correct file parameters
What is already available during start up ?
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are
automatically measured and filled in. These values will be available when starting up the EDIT procedure of an active file.
Adjustable items
• Active horizontal pixels : determine the width of the window on the screen. This value is normally given in the source specifi-
cations. If not, adjust until full image is displayed (no missing pixels).
• Horizontal start in pixels : number of pixels between the beginning of the input signal and the start of the video information in
the signal.
• Horizontal period in ns : when active file, the correct value will be filled out.
• Active vertical lines : number of horizontal lines determining the height of the projected image. this value is normally given in
the specification of the source. If not, adjust until full image height is displayed (no missing lines).
• Vertical start in lines : number of lines between the start of the input signal and start of the image on the screen.
12.5.3 Advanced video settings
Overview
When a video source is selected, theadvancedbutton enables the advanced settings for that video source.
Advanced edit
Comb filter
On
Off
AGC hold interval
Short
Long
Sync locking
Slow
Fast
Sharpness
Coarse
Fine
Image 12-8
video signal
video signal
frame  blanking
HI
egalisation
Image 12-9HI AGC Hold interval
TheComb filteris by default enabled.
TheAGC hold intervalis the time interval in which the AGC is inhibited (AGC hold = no update in video amplitude measurement),
the advanced parameter allows to choose a short or long hold interval.
R5976697 CINEVERSUM™ 110 12/05/2004
107 
						

							12. Image Files Menu
A long AGC hold interval eliminates Macrovision®disturbances since the AGC is hold during a long interval, thus reducing the
probability to encounter a Macrovision®pulse.
Thesync locking settingis recommended for poor video signals (ex: poor TV signals).
Sharpnessadjustment can be chosen to be coarse or fine.
It is recommended to use the default values.
12.5.4 Advanced Data settings
Overview
When a data source is selected, theadvancedbutton enables the advanced settings for a data source.
Advanced edit
VCO range
PLL Cpmp
Clamp position
Clamp width0
0
16
16
Horizontal sync polarity
Determined by ADC
Active low
Active high
Input format
RGB
PR/Y/PB
HDTV-PR/Y/PB
Image 12-10
video infoa
Hs Hsb
Image 12-11Hs horizontal sync pulse
aactivelow
b active high
TheVCO rangesetting determines the frequency range of the VCO (Voltage Controlled Oscillator).
TheCpmp(Charge pump current) sets the low pass filter current.
Both VCO range & Cpmp are set by the image file, changing these settings is only indicated in for special purposes.
Thehorizontal sync polaritysetting can be useful in case of a bad shaped edge, one can choose between the leading (active low)
or trailing (active high) edge.
The input format settings are used to tell more about the signals connected on the BNC’s, it completes the information in the source
selection menu.
- RGB is selected by default and means that an RGB signal is connected to the BNC’s
- PR/Y/PB must be selected whenever:
• a progressive signal (32 kHz frequency video signal ) is connected to the BNC’s (select the source withData on BNC’sin the
Source selection menu).
• one wants (in PiP mode) to visualize the component video signal in a Data window hereby adding a video image in the PiP
layout.
-HDTV-PR/Y/PB for high definition component video signals.
It is recommended to use the default values.
108R5976697 CINEVERSUM™ 110 12/05/2004 
						

							12. Image Files Menu
12.6 Rename file
How to rename a file ?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-12)
3. Press↓to pull down theImage filesmenu.
4. Use↑or↓to selectRename.
5. PressENTER
A dialog box is displayed. (image 12-13)
6. Use↑or↓to select the desired file.
7. PressENTER
A text box is displayed. (image 12-14)
8. PressENTERto activate the input field.
Use←or→to select the characters. Use the↓or↑to change the value.
9. PressENTERto confirm the changes.
Image 12-12
Rename custom file
Video625.c01
Video625.c02
Image 12-13
Rename custom file
New name:
Video625.c01
Image 12-14
12.7 Copy
How to copy a file ?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-15)
3. Press↓to pull down theImage filesmenu.
4. Use↑or↓to selectcopy.
5. PressENTERto confirm.
A dialog box is displayed. (image 12-16)
6. Use↑or↓to select the desired file.
7. PressENTERto confirm.
A text box isdisplayed. (image 12-17)
R5976697 CINEVERSUM™ 110 12/05/2004
109 
						

							12. Image Files Menu
8. PressENTERto activate the input field.
Use←or→to select the characters. Use the↓or↑to change the value.
9. PressENTERto confirm.
Image 12-15
Copy file
Video625.c01
Video625.c02
Video625.s01
Video525.s02
SDI_625.s03
SDI_525.s04
1600_48v.s05
1600_60v.s06
1600_65v.s07
1600_70v.s08
Image 12-16
Copy file
New name:
Video625.c01
Image 12-17
If the AutoImage function does not succeed in finding a file and no file is loaded (load list is empty), which
means that the source is not displayed, then use thecopyfunction: Copy a standard file (.sxx) which is not
too different of the source to display, then edit this file to get the best image.
12.8 Delete
The active file cannot be deleted.
How to delete a file ?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-18)
3. Press↓to pull down theImage filesmenu.
4. Use↑or↓to selectdelete.
5. PressENTERto confirm.
Adialog box is displayed. (image 12-19)
6. Use↑or↓to select the desired file.
7. PressENTERto confirm.
The selected file is deleted and is removed from the list.
110
R5976697 CINEVERSUM™ 110 12/05/2004 
						

							12. Image Files Menu
Image 12-18
Delete custom file
Active files:
Video625.c01
Video625.c02
All files
Image 12-19
R5976697 CINEVERSUM™ 110 12/05/2004111 
						

							12. Image Files Menu
112R5976697 CINEVERSUM™ 110 12/05/2004 
						

							13. Display Setup
13. DISPLAY SETUP
Overview
• Full screen representation
• Startup screen
•TextBox
• Take screenshot
• Menu bar position
• Status bar position
• Sliderbox position
• Auto Image Setup
13.1 Full screen representation
Purpose of the Full screen representation
TheFull screen representationfunction forces to use the complete native resolution of the DMD panels independently of the native
resolution of the source.
How to enable/disable the full screen representation ?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-1)
3. Press↓to pull down the Display setup menu.
4. Use↑or↓to selectFull screen representation.
5. Press→to pull down the menu.
6. Use↓or↑to selectONorOFF.
On Full screen representation is active. The source resolution will be re-scaled to fill the complete screen.
OffThe will be displayed with chosen aspect ratio.
7. PressENTER.
Image 13-1
TheShow native resolutionfunction inImage, on the other hand forces to use the native resolution of the
source. The Show native resolution function overrules the Full screen representation function.
R5976697 CINEVERSUM™ 110 12/05/2004113 
						

							13. Display Setup
13.2 Startup screen
What can be done ?
When the startup screen is enabled, the identification screen is displayed for a few seconds at startup.
This startup screen can be disabled.
How to enable/disable the Startup screen?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-2)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectStartup screen.
5. Press→to pull down the menu.
6. Use↓or↑to selectOnorOff.
On Start up screen will be displayed.
OffNo start up screen will be displayed during start up.
7. PressENTERto confirm.
Image 13-2
13.3 TextBox
What can be done ?
All menus, dialog boxes and text boxes can be disabled by putting the text box function in the off position.
How to enable/disable the Textbox ?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-3)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectTextbox.
5. Press→to pull down the menu.
6. Use↓or↑to enable/disable the textbox.
7. PressENTER.
114
R5976697 CINEVERSUM™ 110 12/05/2004 
						

							13. Display Setup
Image 13-3
To enable the menus and dialog boxes again, press the TEXT button on the RCU.
13.4 Take screenshot
What can be done ?
A screen-shot can be taken from the active projected image. This screen-shot is then saved in a 4 MB RAM and can be used as
background (logo).
Each new screenshot erases the previous one, therefore a warning message is displayed asking the user to confirm.
How to take a screenshot ?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-4)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectTake screenshot.
5. PressENTER.
A dialog box is displayed. (image 13-5)
6. Pressyesto confirm.
A text box shows the evolution of the operation. (image 13-6, image 13-7)
Image 13-4
Take screenshot
This will erase your current logo
Are you sure to proceed?
YESNO
Image 13-5
Override message
Screenshot
Erasing logo
Saving logo
Image 13-6
R5976697 CINEVERSUM™ 110 12/05/2004115 
						

							13. Display Setup
Screenshot
Erasing logo
Saving logo
Image 13-7
13.5 Menu bar position
What can be done ?
The menu bar can be centered vertically. The range is from the top of the screen to the middle of the screen.
This is useful in applications where the top image content is not displayed (e.g. due to blanking).
Image 13-8
Menu bar move
ANormalposition
B New position
How to center the menu ?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-9)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectMenu bar position menu.
5. PressENTER.
6. Use↑or↓to position the menu bar.
Image 13-9
13.6 Status bar position
What can be done ?
The status bar (wizard menu) can be centered vertically. Therange is from the bottom of the screen to the middle of the screen.
116
R5976697 CINEVERSUM™ 110 12/05/2004