Barco Hdx Series Installation Manual

13. Projector Control
13.4.2 Interface Standard
What can be done?
The communication protocol for the communication between the projector and a computer can be set to RS232 or RS422.
How to set up
1. PressMenuto activate the menus and selectProjector Control→Serial Communication.
Image 13-12
Main menu, projector control
Image 13-13
Projector control, serial communication
2. Use the▲or▼key to selectInterface Standard.
PressENTERto toggle between[RS232]or[RS422].
Image 13-14
Interface standard
R5905032 HDX...

13. Projector Control
13.5 Network
About a network connection
A network connection can be made via a wired connection or via the optional wireless unit.
Overview
• Introduction to a Network connection
• Wired DHCP set up
• Wired IP address set up
• Wired subnet mask set up
• Wired default gateway set up
• Wireless network activation
• Wireless access points selection and setup
• Wireless DHCP set up
• Wirelessfixed IP address set up
• Wireless subnet mask set up
• Wireless default gateway set up
238...

13. Projector Control
13.5.1 Introduction to a Network connection
DHCP
Dynamic host configuration protocol. DHCP is a communications protocol that lets network administrators manage
centrally and automate the assignment of IP addresses in an organization’s network. Using the Internet Protocol, each
machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users
with a connection to the Internet, an IP address must be assigned to each machine. Without...

13. Projector Control
13.5.2 Wired DHCP set up
How to set up
1. PressMenuto activate the menus and selectProjector Control→Network.
Image 13-15
Main menu, projector control
Image 13-16
Projector control, network
Image 13-17
Wired DHCP
2. Use the▲or▼key to selectDHCPunder Wired and pressENTERto toggle between[On]or[Off].
[On] : DHCP is activated. An automatic IP address is assigned.
[Off] : DHCP is deactivated. Afixed address must be used.
240
R5905032 HDX SERIES 23/11/2011 

13. Projector Control
13.5.3 Wired IP address set up
How to set up
1. PressMenuto activate the menus and selectProjector Control→Network.
Image 13-18
Main menu, projector control
Image 13-19
Projector control, network
Image 13-20
2. Use the▲or▼key to selectIP AddressunderWiredand pressENTERto activate the input box.
Image 13-21
3. Use the▲or▼key to change the selected character.
R5905032 HDX SERIES 23/11/2011
241 

13. Projector Control
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
242
R5905032 HDX SERIES 23/11/2011 

13. Projector Control
13.5.4 Wired subnet mask set up
Subnet for Wired and Wifimust be different !
How to set up
1. PressMenuto activate the menus and selectProjector Control→Network.
Image 13-22
Main menu, projector control
Image 13-23
Projector control, network
Image 13-24
Subnet mask
2. Use the▲or▼key to selectSubnet MaskunderWiredand pressENTERto activate the input box.
R5905032 HDX SERIES 23/11/2011
243 

13. Projector Control
Image 13-25
3. Use the▲or▼key to change the selected character.
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
244
R5905032 HDX SERIES 23/11/2011 

13. Projector Control
13.5.5 Wired default gateway set up
How to set up
1. PressMenuto activate the menus and selectProjector Control→Network.
Image 13-26
Main menu, projector control
Image 13-27
Projector control, network
Image 13-28
Network, default gateway
2. Use the▲or▼key to selectDefault GatewayunderWiredand pressENTERto activate the input box.
Image 13-29
Default Gateway, input
R5905032 HDX SERIES 23/11/2011245 

13. Projector Control
3. Use the▲or▼key to change the selected character.
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
246
R5905032 HDX SERIES 23/11/2011