Barco Hdx Series Installation Manual

14. Service
14.2 Identification
What can be seen?
The identification screen shows the general information about the projector.
The following items will be displayed:
• Projector address
• Software version
•Configuration
• Baudrate
• IP address
• MAC address
• Status of the on screen text
• Serial number
• Projector Runtime
• Lamp on runtime
• Remaining Lamp runtime
•CustomerId
How to display the overview
1. PressMenuto activate the menus and selectService→Identification.
Image 14-1
Main menu, service
Image...

14. Service
Image 14-3
Identification
2. Use the▲or▼key to scroll through the menu.
278
R5905032 HDX SERIES 23/11/2011 

14. Service
14.3 Diagnosis
What can be seen?
The diagnosis menu gives the possibility to getan overview of the working of the projector.
Overview
• Versions
• Measurements
• Logging
•BoardId
•Notification
• Tilt sensor
R5905032 HDX SERIES 23/11/2011
279 

14. Service
14.3.1 Versions
About versions
The table gives an overview between the reference software and the current installed software.
The reference software is the latest correctly installed package.
The current is the updated software (upgrade of downgrade).
Once the complete current is updated with new software, then this current becomes the new reference.
= means that the current software is equal to the latest reference.
> the current has a higher version than the reference software.
< the...

14. Service
Image 14-7
Diagnosis, versions list
R5905032 HDX SERIES 23/11/2011281 

14. Service
14.3.2 Measurements
About measurements
Measurements contains the following parts:
• Voltages
• Temperatures
• Fan speeds
All tables are built up in an identical way. The current measured value is surrounded with the low and high error and warning limits.
Once one of these values are crossed the threshold an error or warning message is logged or displayed on the local LCD screen.
How to display an overview
1. PressMenuto activate the menus and selectService→Diagnosis→Measurements.
Image 14-8...

14. Service
Image 14-12
Overview voltages
Image 14-13
Overview temperatures
Image 14-14
Overview fan speeds
R5905032 HDX SERIES 23/11/2011283 

14. Service
14.3.3 Logging
What can be done?
Projector hosts two logfiles: one managed bythe Main controller and one specific for the Lamp power supply.
How to display the logging
1. PressMenuto activate the menus and selectService→Diagnosis→Logging.
Image 14-15
Main menu, service
Image 14-16
Service, diagnosis
Image 14-17
Diagnosis, logging
Image 14-18
Logging, main controller
2. Use the▲or▼key to selectMain Controllerto get a logging of the main controller or to selectLamp Power Supplyto get a
logging of...

14. Service
Image 14-20
Lamp power supply logging
R5905032 HDX SERIES 23/11/2011285 

14. Service
14.3.4 Board Id
About Board Id
The board id window gives an overview of the modules with their article number, serial number, etc.
How to get an overview
1. PressMenuto activate the menus and selectService→Diagnosis→Board Id.
Image 14-21
Main menu, service
Image 14-22
Service, diagnosis
Image 14-23
Diagnosis, board ID
2. PressENTERto display an overview of the board IDs.
Image 14-24
Overview board IDs
286R5905032 HDX SERIES 23/11/2011