Barco Hdx Series Installation Manual

13. Projector Control
Image 13-84
DMX overview list
R5905032 HDX SERIES 23/11/2011267 

13. Projector Control
13.8 Buttons
Overview
• Standby button
• Shortcut keys
268
R5905032 HDX SERIES 23/11/2011 

13. Projector Control
13.8.1 Standby button
What can be done ?
When going to standby by pressing the standby button, the following can happen:
• Only lamp will be switched off
• Lamp will be switched off and projector electronics will be powered down after anafter coolperiod (ECO standby)
In ECO standby only the microcontroller, communication interface andlocal (or remote) control are operational. All other electronics
are powered down.
How to set
1. PressMenuto activate the menus and selectProjector...

13. Projector Control
13.8.2 Shortcut keys
What can be done?
An overview of the shortcut allocations with the corresponding menu is given. Those printed in bold are allocated.
The allocated shortcut keys can be cleared within this menu.
For the creation of a short cut key, see Shortcut keys to the menus, page 91
How to clear a shortcut key
1. PressMenuto activate the menus and selectProjector Control→Buttons→Shortcut keys.
Image 13-88
Main menu, projector control
Image 13-89
Projector control, buttons...

13. Projector Control
13.9 Menu position
What is possible?
The on screen menu and the bar scale can be positioned on different places on the screen.
The following positions are possible for both
• Right-top
• Right-mid
• Right-bottom
•Mid-top
• Mid-mid
• Mid-bottom
• Left-top
• Left-mid
• Left-bottom
How to change the position
1. PressMenuto activate the menus and selectProjector Control→Menu Position.
Image 13-92
Main menu, projector control
Image 13-93
Projector control, menu position
Image 13-94
Menu...

13. Projector Control
13.10 Local LCD
What is possible ?
The back light of the local LCD can be adapted to the needs of the environment.
A time out for the local LCD can be set. If there is nothing done on the local LCD, it can go out after a time out.
How to set up
1. PressMenuto activate the menus and selectProjector Control→Local LCD.
Image 13-95
Main menu, projector control
Image 13-96
Projector control, Local LCD
2. Use the▲or▼key to selectBack Light.
Image 13-97
Local LCD, back light
3. Use...

13. Projector Control
13.11 Language selection
What can be done?
The user can change the language of the on screen menus and the local display menus to one of the available languages.
The following languages are available:
•English
• French
•German
• Spanish
• Portuguese
• Japanese
• Chinese
• Korean
•Dutch
All available languages are indicated in the language of the country. The current active language is indicated by checked radio
button.
How to change the language
1. PressMenuto activate the menus and...

13. Projector Control
274R5905032 HDX SERIES 23/11/2011 

14. Service
14. SERVICE
Overview
• Service menu overview
• Identification
• Diagnosis
• Internal Service Patterns
• Convergence
• Factory defaults
• USB memory
• Reset Formatter
•Refill mode
• Save Custom Settings
• Special HD Camera mode
• Auto Dimming when over-temperature
• Time and Date
R5905032 HDX SERIES 23/11/2011
275 

14. Service
14.1 Service menu overview
Overview table
Level 1 Level 2 Level 3
Service
Identification
Diagnostics Version
Measurements
Logging
Board Id
Notifications
Tilt sensor
Internal Service PatternsPMP IN
OSD
PMP OUT
FIB
ConvergenceBlue
Green on Blue
Red on Blue
Factory Defaults
USB Memory Save custom settings
Load custom settings
Reset Formatter
Refill Mode
Save Custom Settings
Special HD Camera Mode
Auto Dimming when Overtemperature
Time and Date
276
R5905032 HDX SERIES 23/11/2011