Barco Hdx Series Installation Manual

13. Projector Control
13.5.6 Wireless network activation
Can only be used with a wireless network module installed.
What can be done ?
Before a wireless network can be used, the status must be set to On.
How to activate
1. PressMenuto activate the menus and selectProjector Control→Network→Wireless setup.
Image 13-30
Main menu, projector control
Image 13-31
Projector control, network
Image 13-32
Network, wireless
2. PressENTERto select.
R5905032 HDX SERIES 23/11/2011
247 

13. Projector Control
Image 13-33
Wireless, status
3. PressENTERto toggle the status between[Off]and[On].
248
R5905032 HDX SERIES 23/11/2011 

13. Projector Control
13.5.7 Wireless access points selection and setup
These menu items are only accessible when wireless network status is set to [on].
Scan for access points
1. SelectScan access pointsand pressENTERto start the scan.
Image 13-34
Scan access points
Image 13-35
Scan access points, results
2. Use the▲or▼key to select the desired access point and pressENTERto activate.
The security type of the network is indicated with the radio button in front ofOpenorWPA/WPA2. The network name is also...

13. Projector Control
Image 13-36
Passprhrase, selection
Image 13-37
Passphrase, entry
Image 13-38
Open network connection
2. PressENTERto activate the inputfield.
3. Enter the passphrase. The input is casesensitive.
PressENTERtofinish the input of the passphrase.
4. Use the▲or▼key to select Apply and pressENTERto open the network connection.
An IP address can now be obtained via DHCP or afixed IP address can be setup.
250
R5905032 HDX SERIES 23/11/2011 

13. Projector Control
13.5.8 Wireless DHCP set up
Can only be used with a wireless network module installed.
How to set up
1. PressMenuto activate the menus and selectProjector Control→Network→Wireless Setup.
Image 13-39
Main menu, projector control
Image 13-40
Projector control, network
Image 13-41
Network, wireless
Image 13-42
Wireless, DHCP
2. PressENTERto open theWirelessmenu.
3. Use the▲or▼key to selectDHCPand pressENTERto toggle between[On]or[Off].
[On] : Wireless DHCP is activated. An automatic IP...

13. Projector Control
13.5.9 Wirelessfixed IP address set up
Can only be used with a wireless network module installed.
How to set up
1. PressMenuto activate the menus and selectProjector Control→Network→Wireless Setup.
Image 13-43
Main menu, projector control
Image 13-44
Projector control, network
Image 13-45
Network, wireless
Image 13-46
Network, wireless
2. Use the▲or▼key to selectIP Addressand pressENTERto activate the input box.
252
R5905032 HDX SERIES 23/11/2011 

13. Projector Control
Image 13-47
Wireless IP address input
3. PressENTERto open theWirelessmenu.
4. Use the▲or▼key to change the selected character.
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
R5905032 HDX SERIES 23/11/2011
253 

13. Projector Control
13.5.10 Wireless subnet mask set up
Can only be used with a wireless network module installed.
Subnet forWiredandWifimust be different !
How to set up
1. PressMenuto activate the menus and selectProjector Control→Network→Wireless Setup.
Image 13-48
Main menu, projector control
Image 13-49
Projector control, network
Image 13-50
Network, wireless
Image 13-51
Network, wireless Subnet Mask
2. PressENTERto open theWirelessmenu.
3. Use the▲or▼key to selectSubnet Maskand pressENTERto...

13. Projector Control
Image 13-52
Wireless Subnet Mask, input
4. Use the▲or▼key to change the selected character.
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
R5905032 HDX SERIES 23/11/2011
255 

13. Projector Control
13.5.11 Wireless default gateway set up
Can only be used with a wireless network module installed.
How to set up
1. PressMenuto activate the menus and selectProjector Control→Network→Wireless Setup.
Image 13-53
Main menu, projector control
Image 13-54
Projector control, network
Image 13-55
Network, wireless
Image 13-56
Wireless default gateway
2. PressENTERto open theWirelessmenu.
3. Use the▲or▼key to selectSubnet Maskand pressENTERto activate the input box.
256
R5905032 HDX SERIES...