Home > Avaya > Communications System > Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Here you can view all the pages of manual Avaya Partner Advanced Communications System 1600 Dsl Module User Guide. The Avaya manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 61

Avaya, Inc. - 60 - PARTNER ACS 1600 DSL module User Guide
9. System
Utilities
Displays the Utilities Menu, which contains the following
submenus and commands that either upgrade the ACOS
software or support ACOS application development.
Except for Ping Utility and Trace Route, these commands
are only for application development, software upgrades or to
restore factory defaults.
You must restart the PARTNER ACS 1600 DSL module for
any changes to take effect.  For more information on
restarting the PARTNER...

Page 62

Avaya, Inc. - 61 - PARTNER ACS 1600 DSL module User Guide
Z. Configure Console Baud Rate
Displays the following commands to set the console Baud
rate:
0. Unset (use Default)
1. 9600
2. 19200
3. 38400
4. 57600
5. 115200
Select your choice.
V. Configure Console Timeout
Sets the console timeout, a value between 0-60 minutes
(default = 3 minutes).  Type the timeout value, and then press
ENTER.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command...

Page 63

Avaya, Inc. - 62 - PARTNER ACS 1600 DSL module User Guide
R. Rename File
Replaces the old file name with a new one.  Type the
old file name, and then type the new one.
X. Remove File by name
Deletes the entered file from the file system.
F. Format File System drive
Deletes all files in the file system, including the
configuration file (config.st).
If you delete the configuration file, you will have to
reconfigure every setting.
S. Space left in File System
Displays the available disk space (bytes) in the...

Page 64

Avaya, Inc. - 63 - PARTNER ACS 1600 DSL module User Guide
You must restart the PARTNER ACS 1600 DSL
module to load the new version of ACOS.  For more
information on restarting the PARTNER ACS 1600 DSL
module or on upgrading your software using TFTP, see
the “PARTNER ACS 1600 DSL module basics”
chapter.
X. Update Entire System
Uses TFTP to download files to update the IAD.
A. File Transfer Utilities
Displays the File Transfer Method submenu,
which contains the following commands that
download a file to...

Page 65

Avaya, Inc. - 64 - PARTNER ACS 1600 DSL module User Guide
The Available interworking types menu displays, which
contains the following commands and submenus that create a
Frame Relay to ATM Interworking connection:
1. FRF5
Displays the FRF.5 DE Mapping submenu, which contains
the following commands to set how the DE maps to the CLPI:
0. Set FR-SSCS, ATM = 0
Displays the FRF.5 CLPI Mapping menu, which
contains the following commands to set FR-SSCS:
A. Set FR-SSCS according to ATM
B. Use both FR-SSCS and...

Page 66

Avaya, Inc. - 65 - PARTNER ACS 1600 DSL module User Guide
M. Map FR FECN to ATM EFCI
Displays the FRF.8 FECN Mapping menu,
which contains the following commands to set
the FECN mapping value:
0. Always 0
1. Always 1
M. Map FR FECN to ATM EFCI
F. False
Displays the FRF.8 DE Mapping menu, which contains
the following commands to set the DE mapping value:
0. Always 0
Displays the FRF.8 FECN Mapping menu,
which contains the following commands to set
the FECN mapping value:
0. Always 0
1. Always 1
M. Map FR...

Page 67

Avaya, Inc. - 66 - PARTNER ACS 1600 DSL module User Guide
• ATM Slot - ATM slot number for this ID.
• VPI - the ATM virtual path identifier (VPI) for this ID.
• VCI - the virtual circuit identifier (VCI) for this ID.
For more information about a connection, type the ID number,
and then press ENTER.
4. Default Interworking Connections
Restores the default interworking connections.
D. Configure
DHCP Server
Displays the DHCP Server Configuration Menu, which
contains the following commands to configure...

Page 68

Avaya, Inc. - 67 - PARTNER ACS 1600 DSL module User Guide
The NetBIOS Type Configuration Menu displays, which
contains the following commands to set the NetBIOS node
type:
1. B-node
2. P-node
4. M-node
8. H-node
Select your choice.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt.  To accept this value, press ENTER.
Your settings display in the Display DHCP Configuration
command.
P. Configure DHCP Address Range Pool
Sets the DHCP IP...

Page 69

Avaya, Inc. - 68 - PARTNER ACS 1600 DSL module User Guide
F. Display DHCP Configuration
Displays the following information about the DHCP
configuration:
• Default gateway - IP address of packets sent to
DHCP Clients.
• Default DNS server - IP address of the DNS
server.
• Default NetBIOS server - IP address of the
NetBIOS server.
• Node type - NetBIOS nodes type: B-node, P-node,
M-node or H-node.
• Default subnet - IP subnet mask; number of bits
reserved for the host ID.
• Default lease - length of time...

Page 70

Avaya, Inc. - 69 - PARTNER ACS 1600 DSL module User Guide
• nacks sent
• requests for other servers
• protocol errors
For the preceding to display, you must attach DHCP Client
devices that use DHCP to obtain an IP address to the
PARTNER ACS 1600 DSL module.
A. Display DHCP Server Assigned Addresses
Displays the following information about the DHCP Server
assigned addresses.
• IP - IP address of the device, assigned by the
PARTNER ACS 1600 DSL module.
• Client ID - Ethernet MAC address for the device.
•...
Start reading Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Related Manuals for Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

All Avaya manuals