Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Avaya, Inc. - 50 - PARTNER ACS 1600 DSL module User Guide
2. Modify Existing DLCI
Type the DLCI number, press ENTER, and then
choose a command from the FR Encapsulation
Configuration submenu.
1. RAW (No Encapsulation)
2. Proprietary Voice DLCI
3. RFC 1490
4. ATM RFC 1483 (Tunneling)
Select your choice, and then choose a command from
the FR DLCI Options submenu.
1. Configure Transmit CIR
Follow the on-screen messages to enter the
following information.
Questions below may or not display, depending
on the...

Avaya, Inc. - 51 - PARTNER ACS 1600 DSL module User Guide
3. Configure FRF.12 Fragmentation
Displays the End-to-End Fragmentation
Configuration submenu, which contains the
following commands.
1. Enable/Disable End-to-End FRF.12
Enables and disables End-to-End
FRF.12.
2. Set Fragmentation Size
Sets the maximum fragmentation size, a
value between 100-1,600 bytes.
Type the fragmentation size, and then
press ENTER.
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the...

Avaya, Inc. - 52 - PARTNER ACS 1600 DSL module User Guide
2. AAL0 (None)
Displays the ATM Service Category Configuration
submenu, which contains the following commands to
set the service category:
1. CBR
2. UBR
Select your choice, and then follow the on-screen
messages to set the PCR value.
3. Proprietary Voice
Select for Voice encapsulation over a specific PVC.
4. RFC 1483 (using VC Muxing)
Displays the ATM Service Category Configuration
submenu, which contains the following commands to
set the service...

Avaya, Inc. - 53 - PARTNER ACS 1600 DSL module User Guide
Displays the ATM Service Category Configuration
submenu, which contains the following commands to
set the service category:
1. CBR
2. UBR
Select your choice, and then follow the on-screen
messages to set the PCR value.
7. RFC 2364 (PPPoATM using VC Muxing)
Displays the following commands to set the PPP
authorization type:
0. None
1. PAP Client
2. PAP Server
3. CHAP Client
4. CHAP Server
Select your choice, and then follow the on-screen
messages to...

Avaya, Inc. - 54 - PARTNER ACS 1600 DSL module User Guide
2. RAW (AAL0)
Displays the ATM Service Category Configuration
submenu, which contains the following commands to
set the service category:
1. CBR
2. UBR
Select your choice, and then follow the on-screen
messages to set the PCR value.
3. Proprietary Voice
Select for Voice encapsulation over a specific PVC.
4. RFC 1483 (using VC Muxing)
Displays the ATM Service Category Configuration
submenu, which contains the following commands to
set the service...

Avaya, Inc. - 55 - PARTNER ACS 1600 DSL module User Guide
Displays the ATM Service Category Configuration
submenu, which contains the following commands to
set the service category:
1. CBR
2. UBR
Select your choice, and then follow the on-
screen messages to set the PCR value.
7. RFC 2364 (PPPoATM using VC Muxing)
Displays the ATM Service Category Configuration
submenu, which contains the following commands to
set the service category:
1. CBR
2. UBR
Select your choice, and then follow the on-screen...

Avaya, Inc. - 56 - PARTNER ACS 1600 DSL module User Guide
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt.  To accept this value, press
ENTER.
2. Configure Copper Mountain Fragmentation
Displays the FR FRF.12 Configuration submenu,
which contains the following commands.
1. Enable/Disable CuMtn Fragmentation
Enables and disables Copper Mountain
fragmentation.
2. Set Real-Time DLCI
Sets a real time value for a DLCI port.
Type the number...

Avaya, Inc. - 57 - PARTNER ACS 1600 DSL module User Guide
2. Configure Receive Congestion Parameters
Follow the on-screen messages to enter the following
receive congestion parameter information.
•  FECN/BECN condition set size
•  FECN/BECN condition clear size
•  FECN/BECN maximum number of bytes to store
Select your choice.
Your settings display in the Display Current Configuration
command in the Reports Menu.  For more information, see
Reports Menu earlier in this chapter.
You must restart the PARTNER...

Avaya, Inc. - 58 - PARTNER ACS 1600 DSL module User Guide
You must restart the PARTNER ACS 1600 DSL module for
any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“PARTNER ACS 1600 DSL module basics” chapter.
6. Configure
LAN
Displays the LAN Configuration Menu, which contains the
following command:
F. Set/Clear Full Duplex
Enables and disables full duplex Ethernet mode, which allows
simultaneous transmission and receipt of Ethernet packets.
Type the...

Avaya, Inc. - 59 - PARTNER ACS 1600 DSL module User Guide
C. Configure SNMP Community
Sets the SNMP community to which your device belongs
(maximum = 39 alphanumeric characters).  This name must
match the name of the SNMP host.  Type the name, and then
press ENTER.
If SNMP you enable and the Community Name is null, SNMP
goes into read-only mode.
T. Configure SNMP Trap Host IP Address
Sets the IP address of the system setup for trap operations.
Type the IP address, and then press ENTER.
8. Configure...