Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Avaya, Inc. - 30 - PARTNER ACS 1600 DSL module User Guide
2. Configure IP
Router
The Router Configuration Menu contains the following
submenus and commands.
You must restart the PARTNER ACS 1600 DSL module for
any changes to take effect.  For more information, see the
“PARTNER ACS 1600 DSL module basics” chapter.
Main Menu
All interfaces
configured with
IP?
Using RIP?
Using default
route?
Enable RIP
globally
End
Define IP for each
interface per port
Configure RIP
version by port
Routing
End
Enable...

Avaya, Inc. - 31 - PARTNER ACS 1600 DSL module User Guide
C. Configure Port IP Address
Sets the IP address and subnet mask for the selected
interface.
Type the number of the Interface, the number of the port or
connection to configure, and then enter the following:
•  New IP address
• New subnet mask
• Priority
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt.  To accept this value, press ENTER.
U. Unconfigure Port IP Address
Deletes...

Avaya, Inc. - 32 - PARTNER ACS 1600 DSL module User Guide
T. Remove the Default Route
Deletes the default static route from the Route Table.
Type the IP address to remove, and then press
ENTER.
D. Display Route Table
Displays the following information about statically
configured routes and dynamically learned ones:
• NETWORK ADDRESS - destination
address.
• NETMASK - IP subnet mask; number of bits
reserved for the host ID.
• GATEWAY ADDRESS - IP address of
packets sent to destination.
• interface - IP...

Avaya, Inc. - 33 - PARTNER ACS 1600 DSL module User Guide
N. Configure DNS Client
Displays the DNS Client Menu, which contains the following
commands to configure the Domain Name Server (DNS)
client:
A. Set DNS Server IP Address
Sets the IP address of the DNS Server.  Type the DNS
Server IP address, and then press ENTER.
T. Set DNS Server Timeout
Sets the DNS Server Timeout, a value between 5 - 20
seconds (default = 5 seconds).  Type the DNS Server
Timeout value, and then press ENTER.
S. Display DNS...

Avaya, Inc. - 34 - PARTNER ACS 1600 DSL module User Guide
S. Display DHCP Relay Statistics
Displays the following information about the DHCP
Relay:
•  DHCP client requests forwarded to DHCP server
•  DHCP client requests dropped
•  Server responses forwarded to DHCP clients
• Server responses dropped
•  Unknown server responses
•  Server requests timed out
T. Configure Telnet Server Port
Sets the port for the Telnet Server (default = 23).
Type the number of the port, and then press ENTER.
The PARTNER ACS...

Avaya, Inc. - 35 - PARTNER ACS 1600 DSL module User Guide
T. Toggle input or output type filters to view/edit
Switches between the input and output filter types.
The filter type that you set here determines what
displays when you select any of the following
commands:
• Display all filters of the chosen type
• Insert a new or buffered filter of the chosen
type
• Append a new or buffered filter to the end of
the list
• Edit filter of the chosen type
• Copy filter operations menu
• Delete one filter of the...

Avaya, Inc. - 36 - PARTNER ACS 1600 DSL module User Guide
A. Append a new or buffered filter to the end of the
list
Adds a new filter of the type set with the Toggle input
or output type filters to view/edit command to the
end of list that displays when you select Display all
filters of the chosen type.
Type Y, and then follow the on-screen messages to
enter the following information:
•  Filter state – Idle or Active
•  Filter action – Pass or Discard
•  Filter protocol – IP, ICMP, IGMP, TCP, UDP
•...

Avaya, Inc. - 37 - PARTNER ACS 1600 DSL module User Guide
•  Filter Destination Port High
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt.  To accept this value, press
ENTER.
C. Copy filter operations menu
Displays the IP Filter Copy to Buffer Menu, which
contains the following commands for all filters of the
type that you set with the Toggle input or output type
filters to view/edit command.
C. Copy a filter of the chosen type to...

Avaya, Inc. - 38 - PARTNER ACS 1600 DSL module User Guide
E. Edit the filter in the copy buffer
Edits the filter in the copy buffer.
Follow the on-screen messages to enter the
following information:
•  Filter state – Idle or Active
•  Filter action – Pass or Discard
•  Filter protocol – IP, ICMP, IGMP, TCP,
UDP
•  Filter Source IP Low Address
•  Filter Source IP High Address
•  Filter Source Port Low – TCP or UDP
packets only
•  Filter Source Port High - TCP or UDP
packets only
•  Filter Destination IP...

Avaya, Inc. - 39 - PARTNER ACS 1600 DSL module User Guide
D. Display Route Table
Displays the following information about statically configured
routes and dynamically learned ones:
• NETWORK ADDRESS - destination address.
• NETMASK - IP subnet mask; number of bits
reserved for the host ID.
• GATEWAY ADDRESS - IP address of packets sent
to destination.
• interface - IP address of outgoing interface.
• Metric - number of hops (routers) required to reach
the specified gateway.
• Type – static or dynamic.