Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Avaya, Inc. - 40 - PARTNER ACS 1600 DSL module User Guide
3. Configure
Bridge
Displays the Bridge Configuration Menu, which contains the
following submenu and commands.
Main Menu
Using spanning
tree?
Assigning
bridge priority?
Define bridge
priority
Define root bridge
Enable bridging
globally
End
Enable spanning
tree by port
Enable spanning
tree globally
Bridging
Enable bridging by
port
Assigning root
bridge?
End 

Avaya, Inc. - 41 - PARTNER ACS 1600 DSL module User Guide
Your settings display in the Display Current Configuration
command in the Reports Menu.  For more information, see
Reports Menu earlier in this chapter.
You must enable bridging both globally and by port number,
and then restart the PARTNER ACS 1600 DSL module for
any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“PARTNER ACS 1600 DSL module basics” chapter.
G. Enable/Disable Bridging...

Avaya, Inc. - 42 - PARTNER ACS 1600 DSL module User Guide
The Spanning Tree algorithm selects the bridge with the
lowest priority on the network as the Root Bridge.
Q. Configure Spanning Tree Port Priority
Sets the Spanning Tree priority by port, a value between 0-
255 (default = 128).  The lower the value, the higher the
priority.
Type the number of the Interface to configure, the port priority
value, and then press ENTER.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in...

Avaya, Inc. - 43 - PARTNER ACS 1600 DSL module User Guide
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt.  To accept this value, press ENTER.
When there are multiple paths to the Root Bridge, the
Spanning Tree algorithm selects the port with the lowest total
path cost as the route port.
D. Delete Bridge Forwarding Database Entry
Deletes an Ethernet address from the bridge forwarding
database.  Type the Ethernet address to delete, and...

Avaya, Inc. - 44 - PARTNER ACS 1600 DSL module User Guide
5. Configure
WAN
Displays the WAN Configuration Menu, which contains the
following submenu and commands.  Commands may or may
not display, depending on the datalink protocol that you select
and the Interface installed.
SDSL Module
Changing
factory
configuration?
Select quick
configuration
ATM?
Frame Relay?
Define DLCIs
Set maintenance
protocol
ATM?
Frame Relay?
Define DLCIs
Set maintenance
protocol
Define PVCs
Configure ATM
options
End
End
End...

Avaya, Inc. - 45 - PARTNER ACS 1600 DSL module User Guide
0. Quick Configuration
Displays the Quick Configuration submenu, which contains
the following commands to quickly configure the NetEngine
PARTNER ACS 1600 DSL module .
1. Lucent Stinger (Conexant Autobaud, Payload
Scrambling)
2. Nokia (Auto Cycle)
3. Copper Mountain (Auto Sense)
4. Paradyne (Framed 784Kbps, Payload
Scrambling)
5. AccessLan CPE
6. Nortel IMAS
7. ATM (Unframed, 1152Kpbs fixed)
8. Frame Relay (784Kpbs fixed)
Select your choice.
The...

Avaya, Inc. - 46 - PARTNER ACS 1600 DSL module User Guide
2. Configure Physical Interface
Configure Physical Interface submenus and commands
may or may not display, depending on the Interface that you
select.
Universal Serial Interface (USI) Mode
Displays USI Configuration Menu, which contains the
following commands:
1. Set WAN interface type
Displays the USI Interface Type submenu, which contains
the following commands that set the electrical configuration
for the USI WAN mode.
1. RS-530
2. V.35
Select...

Avaya, Inc. - 47 - PARTNER ACS 1600 DSL module User Guide
SDSL Mode
Displays SDSL Configuration submenu, which contains the
following commands to set the SDSL mode or speed.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt.  To accept this value, press ENTER.
1. Toggle SDSL Mode (CO or CPE)
2. Set SDSL Speed to Auto Cycle (Nokia)
Displays the Auto Cycle First Speed Option
submenu, which contains the following commands to
set the...

Avaya, Inc. - 48 - PARTNER ACS 1600 DSL module User Guide
D. Enable/Disable SDSL Debug Messages
Enables and disables the display of SDSL debugging
messages.  Select to enable.  Select a second time to
disable.
Y. Enable/Disable Sync Msgs
Enables and disables the display of configuration
synchronization messages.  Select to enable.  Select a
second time to disable.
P. Preactivation Debug Mode
Enables and disables the preactivation debug
messages.  Select to enable.  Select a second time to
disable.
Select...

Avaya, Inc. - 49 - PARTNER ACS 1600 DSL module User Guide
2. Configure Receive CIR
Follow the on-screen messages to enter the
following information.  Questions below may or
not display, depending on the options that you
select.
•  Receive Committed Information Rate
(CIR)
•  Committed burst size (Bc)
• Circuit Throughput
•  Excess burst size (Be)
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt.  To accept this
value, press ENTER.
3....