Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Avaya, Inc. - 90 - PARTNER ACS 1600 DSL module User Guide
2. Select Configure System Contact.
The following instructions display on-screen:
System Contact is currently:
Enter new System Contact >
3. Type the name of the SNMP contact person (maximum =
39 alphanumeric characters) or press ENTER to accept
the default value that displays.
The system contact name is not case-sensitive.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the...

Avaya, Inc. - 91 - PARTNER ACS 1600 DSL module User Guide
Configuring the System Location
To configure the system location:
1. On the Main Menu, select Configure SNMP.
The SNMP Configuration Menu displays.
2. Select Configure System Location.
The following instructions display on-screen:
System Location is currently:
Enter new System Location >
3. Type the SNMP server location or press ENTER to accept
the default value that displays.
You must restart the PARTNER ACS 1600 DSL module for
any changes to...

Avaya, Inc. - 92 - PARTNER ACS 1600 DSL module User Guide
Configuring the System Community
The value that you set must match the write community name
of the SNMP host to enable the SNMP Set operation.  If you
enable SNMP but the community name is not set, SNMP goes
into read-only mode.
To configure the system community:
1. On the Main Menu, select Configure SNMP.
The SNMP Configuration Menu displays.
*****************************************
* SNMP Configuration Menu *...

Avaya, Inc. - 93 - PARTNER ACS 1600 DSL module User Guide
Configuring the SNMP Trap Host IP Address
To configure the SNMPP Trap Host IP Address:
1. On the Main Menu, select Configure SNMP.
The SNMP Configuration Menu displays.
*****************************************
* SNMP Configuration Menu *
*****************************************
E. Enable/Disable SNMP
P. Configure System Contact
N. Configure System Name
L. Configure System Location
C. Configure SNMP Community
T. Configure SNMP Trap Host IP...

Avaya, Inc. - 94 - PARTNER ACS 1600 DSL module User Guide
Configuring the TFTP Server
To configure the TFTP Server:
Copy the following files to a directory on your PC, in the
path that the TFTP Server will use to send files to the
PARTNER ACS 1600 DSL module:
acos.bin
release.dat
boot.bin
callcontrol.vg
cucomcpe.vg
tbcpe.vg
mgcp_rg.vg
aal2.vg
For more information, see your TFTP Server documentation.
Using TFTP
To upgrade the PARTNER ACS 1600 DSL module software
using TFTP:
1. Log on to the menu...

Avaya, Inc. - 95 - PARTNER ACS 1600 DSL module User Guide
2. On the Main Menu, select System Utilities.
The Utilities Menu displays.
*******************************************
* Utilities Menu *
*******************************************
P. Ping Utility
T. Trace Route
Z. Configure Console Baud Rate
V. Configure Console Timeout
R. Hard Reset or Reload ACOS from FLASH
D. Set System Defaults
W. Save System Settings as Defaults
F. File System Menu
X. File Transfer Menu
3. Select File Transfer Menu.
The...

Avaya, Inc. - 96 - PARTNER ACS 1600 DSL module User Guide
Using Telnet
To upgrade the PARTNER ACS 1600 DSL module software
using TFTP via Telnet:
1. Use a Telnet program to connect to the PARTNER ACS
1600 DSL module.
For more information, see the Getting started chapter.
2. Follow the procedures described in the Using TFTP
section.
Verifying the download
To verify that the file downloaded successfully
1. On the Main Menu, select System Utilities.
The Utilities Menu displays....

Avaya, Inc. - 97 - PARTNER ACS 1600 DSL module User Guide
3. Select Directory of all files.
A list of all installed files displays.
Upgrading
ACOS
You can use the Trivial File Transfer Protocol (TFTP) to
upgrade the PARTNER ACS 1600 DSL module software.  To
use TFTP to upgrade, you must properly configure both the
PARTNER ACS 1600 DSL module and the computer that
contains the TFTP Server program, a program that you must
purchase separately.
Before you can run TFTP, you must configure the IP address
of...

Avaya, Inc. - 98 - PARTNER ACS 1600 DSL module User Guide
N. Configure NAT
T. Derived Timing
Z. Diagnostics Menu
C. Command Line Interface
P. VoicePath Configure
For more information, see the Getting Started chapter.
2. On the Main Menu, select System Utilities.
The Utilities Menu displays.
*******************************************
* Utilities Menu *
*******************************************
P. Ping Utility
T. Trace Route
Z. Configure Console Baud Rate
V. Configure Console Timeout
R. Hard Reset or...

Avaya, Inc. - 99 - PARTNER ACS 1600 DSL module User Guide
4. Select Update ACOS [acos.bin].
The File Transfer Method submenu displays.
*****************************************
* File Transfer Method *
*****************************************
1. Receive via TFTP
2. Receive via XMODEM
5. Select Receive via TFTP.
6. Type the IP address of the TFTP Server, and then press
ENTER.
7. Type ACOS.bin, and then press ENTER.
It takes up to 2 minutes to download the file, and up to 30
seconds to save it to Flash...