Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Avaya, Inc. - 130 - PARTNER ACS 1600 DSL module User Guide
5. Type the new IP address, or press ENTER to select the
current IP address.
The following instructions display on-screen:
Current subnet mask = 0.0.0.0
Enter new subnet mask for this interface:
6. Type the new subnet mask address, or press ENTER to
select the current subnet mask.
The following instructions display on-screen:
Select priority Normal/High [N/H] (N):
7. Do one of the following, and then type Y:
To give the interface high priority,...

Avaya, Inc. - 131 - PARTNER ACS 1600 DSL module User Guide
Enabling RIP poisoned reverse globally
To enable RIP poisoned reverse globally:
1. On the Main Menu, select Configure IP Router.
The Router Configuration Menu displays.
*****************************************
* Router Configuration Menu *
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP...

Avaya, Inc. - 132 - PARTNER ACS 1600 DSL module User Guide
Enabling RIP poisoned reverse by port
To enable RIP poisoned reverse by port:
1. On the Main Menu, select Configure IP Router.
The Router Configuration Menu displays.
*****************************************
* Router Configuration Menu *
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned...

Avaya, Inc. - 133 - PARTNER ACS 1600 DSL module User Guide
4. Type E.
The Router Configuration Menu redisplays.
5. Repeat steps 1-3 for each port for which you want to
enable RIP poisoned reverse.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Setting the RIP version
To set the RIP version:
1. On the Main Menu, select Configure IP Router.
The Router Configuration Menu...

Avaya, Inc. - 134 - PARTNER ACS 1600 DSL module User Guide
3. Type the number of the port for which you want to
configure the RIP poisoned reverse version.
The following instructions display on-screen:
Enter RIP Version for Port 1
0. Disabled
1. Version 1 Broadcast
2. Version 2 Broadcast
3. Version 2 Multicast
4. Select your choice, and then press any key.
The Router Configuration Menu redisplays.
5. Repeat steps 1-4 for each port for which want to set the
RIP poisoned reverse version.
You must restart...

Avaya, Inc. - 135 - PARTNER ACS 1600 DSL module User Guide
Adding a static
route
To add a static route:
1. On the Main Menu, select Configure IP Router.
The Router Configuration Menu displays.
*****************************************
* Router Configuration Menu *
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS...

Avaya, Inc. - 136 - PARTNER ACS 1600 DSL module User Guide
6. Type the gateway address, press ENTER, and then type
Y.
The Router Modification Menu redisplays.
7. Repeat steps 1-6 for each route that you want to add.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Adding a
default route
To add a default route:
1. On the Main Menu, select Configure IP Router.
The Router...

Avaya, Inc. - 137 - PARTNER ACS 1600 DSL module User Guide
T. Remove the Default Route
D. Display Route Table
3. Select Add/Change the Default Route.
4. Type the gateway address for the default route, press
ENTER, and then type Y.
The Router Modification Menu displays.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Disabling
bridging
To configure the PARTNER ACS 1600...

Avaya, Inc. - 138 - PARTNER ACS 1600 DSL module User Guide
C. Configure Spanning Tree Path Cost
D. Delete Bridge Forwarding Database
Entry
2. Select Enable/Disable Bridging Globally, and the type
D.
The Bridge Configuration Menu redisplays.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Disabling bridging by port
To disable bridging by port:
1. On the Main Menu, select...

Avaya, Inc. - 139 - PARTNER ACS 1600 DSL module User Guide
2. Select Enable/Disable Bridging by Port.
The following instructions display on-screen:
Available Interfaces :
1. SDSL
2. 10/100BaseT Ethernet
3. Universal Serial
0. (Abort)
Selection :
Interfaces may or may not display, depending on the IAD
in use.
3. Type the number of the port for which you want to disable
bridging, and then type D.
4. Repeat steps 1-3 for each port on which you want to
disable bridging.
The Bridge Configuration Menu...