Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Avaya, Inc. - 150 - PARTNER ACS 1600 DSL module User Guide
3. Type the number of the port for which you want to enable
STP, and then type E.
4. Repeat steps 1-3 for each port on which you want to
enable STP.
The Bridge Configuration Menu redisplays.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter. 

Avaya, Inc. - 151 - PARTNER ACS 1600 DSL module User Guide
9. NAT configuration
This chapter walks you through the steps required to
configure the Network Address Translation (NAT).  For more
information on the menus, submenus and commands in this
chapter, see the “Menu interface” chapter.
The setup of IP networks can be difficult and time consuming,
as each requires an IP address, subnet mask, DNS address
and a default router.
If you enter once piece of information incorrectly, the network
connection...

Avaya, Inc. - 152 - PARTNER ACS 1600 DSL module User Guide
Enabling NAT
translation
To enable the NAT translation by port:
1. On the Main Menu, select Configure NAT.
The NAT Configuration Menu displays.
*****************************************
* NAT Configuration Menu *
*****************************************
B. Enable/Disable NAT Debug Messages
P. Enable/Disable NAT Translation by Port
T. Configure NAT TCP Timeout
U. Configure NAT UDP Timeout
R. Configure NAT Port Range
N. Configure NAT Local Server...

Avaya, Inc. - 153 - PARTNER ACS 1600 DSL module User Guide
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Configuring
the NAT local
server entry
When you configure the NAT local server, it allows access
from the Internet via the IP address of the NAT-enabled port.
To configure the NAT local server entry:
1. On the Main Menu, select Configure NAT.
The NAT Configuration Menu displays.
*****************************************
* NAT Configuration Menu *...

Avaya, Inc. - 154 - PARTNER ACS 1600 DSL module User Guide
4. Type the new translated IP address (range = 1-65535),
and then press ENTER.
The following instructions display on-screen:
Current NAT Local Server Translated IP
Address = 0.0.0.0
Enter new NAT Local Server Standard IP
address:
5. Type the new standard IP address (range = 1-65535), and
then press ENTER.
The following instructions display on-screen:
Enter NAT Local Server Protocol (1=TCP
2=UDP):
6. Select the local server protocol, and then...

Avaya, Inc. - 155 - PARTNER ACS 1600 DSL module User Guide
Configuring a NAT TCP timeout
To configure a NAT TCP timeout:
1. On the Main Menu, select Configure NAT.
The NAT Configuration Menu displays.
*****************************************
* NAT Configuration Menu *
*****************************************
B. Enable/Disable NAT Debug Messages
P. Enable/Disable NAT Translation by Port
T. Configure NAT TCP Timeout
U. Configure NAT UDP Timeout
R. Configure NAT Port Range
N. Configure NAT Local Server...

Avaya, Inc. - 156 - PARTNER ACS 1600 DSL module User Guide
Configuring a NAT UDP timeout
To configure a NAT UDP timeout:
1. On the Main Menu, select Configure NAT.
The NAT Configuration Menu displays.
*****************************************
* NAT Configuration Menu *
*****************************************
B. Enable/Disable NAT Debug Messages
P. Enable/Disable NAT Translation by Port
T. Configure NAT TCP Timeout
U. Configure NAT UDP Timeout
R. Configure NAT Port Range
N. Configure NAT Local Server...

Avaya, Inc. - 157 - PARTNER ACS 1600 DSL module User Guide
Configuring
the NAT port
range
Under normal circumstances, the port range default setting is
adequate.  However, if you interact with multiple-player IP
games or video conferencing, you need to configure the port
range setting.
To multiplex several connections to a single destination, the
PARTNER ACS 1600 DSL module assigns all packets unique
port numbers.  Each IP packet starts with a header that
contain the source and destination addresses, as...

Avaya, Inc. - 158 - PARTNER ACS 1600 DSL module User Guide
2. Select Configure NAT Port Range.
The following instructions display on-screen:
Enter Low End of NAT Port Range
(5000..65534): (50000)
3. Type the low end value (range = 5000-65534), and then
press ENTER.
The following instructions display on-screen:
Enter High End of NAT Port Range
(5010..65534): (50000)
4. Type the high end value (range = 5000-65534), and then
press ENTER.
The NAT Configuration Menu redisplays.
You must restart the PARTNER...

Avaya, Inc. - 159 - PARTNER ACS 1600 DSL module User Guide
10. DHCP server configuration
This chapter walks you through the steps required to
configure the Dynamic Host Configuration Protocol (DHCP)
server.  For more information on the menus, submenus and
commands in this chapter, see the “Menu interface” chapter.
DHCP allows for dynamic allocation of network addresses and
configurations to newly attached hosts.  DHCP reduces the
work required to administer a large network.
You must complete the...