Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

Avaya, Inc. - 120 - PARTNER ACS 1600 DSL module User Guide
4. Show Current DLCIs
3. Select Delete DLCI.
4. Do one of the following:
To delete the DLCI configuration, type y.
To cancel the deletion, type n.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Configuring
Frame Relay
options
The PARTNER ACS 1600 DSL module contains commands
that allow you to configure or...

Avaya, Inc. - 121 - PARTNER ACS 1600 DSL module User Guide
3. Select Configure Fragmentation.
The FR Fragmentation Configuration submenu displays.
*****************************************
* FR Fragmentation Configuration *
*****************************************
1. Configure FRF.12 Fragmentation
2. Configure CopperMountain Fragmentation
4. Do one of the following:
Select Configure FRF.12 Fragmentation.
The FR FRF.12 Configuration submenu displays.
*************************************
* FR FRF.12...

Avaya, Inc. - 122 - PARTNER ACS 1600 DSL module User Guide
Configuring the maintenance protocol
To configure the maintenance protocol:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure FR Options.
The Frame Relay Options submenu displays.
*****************************************
* Frame Relay Options *
*****************************************
1. Configure Fragmentation
2....

Avaya, Inc. - 123 - PARTNER ACS 1600 DSL module User Guide
Configuring the congestion parameters
To configure the congestion parameters:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure FR Options.
The Frame Relay Options submenu displays.
*****************************************
* Frame Relay Options *
*****************************************
1. Configure Fragmentation
2....

Avaya, Inc. - 124 - PARTNER ACS 1600 DSL module User Guide
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Configuring
the voice path
After you define the voice PVCs and DLCIs, you need to
perform the following steps to configure the voice path:
Set the jitter delay
Set the SLIC control mode
Set the echo cancellation
Setting the jitter delay
When the jitter delay is set, the PARTNER ACS 1600 DSL
module holds the incoming packet data from the WAN voice
channel to allow for...

Avaya, Inc. - 125 - PARTNER ACS 1600 DSL module User Guide
Setting the SLIC Control Mode
To set the SLIC control mode:
1. On the Main Menu, select VoicePath Configure.
The Voice Configuration submenu displays.
*****************************************
* Voice Configuration *
*****************************************
V. Set Voice Gateway
J. Set Jitter Delay
D. Display Jitter Delay
T. Set SLIC Control Mode
U. Set Compander Mode (u-Law, A-Law)
M. Set Debug Mode
E. Configure Echo Cancellation Default...

Avaya, Inc. - 126 - PARTNER ACS 1600 DSL module User Guide
the conclusion of the FAX or modem session, echo
cancellation automatically re-enables.
To configure echo cancellation:
1. On the Main Menu, select VoicePath Configure.
The Voice Configuration submenu displays.
*****************************************
* Voice Configuration *
*****************************************
V. Set Voice Gateway
J. Set Jitter Delay
D. Display Jitter Delay
T. Set SLIC Control Mode
U. Set Compander Mode (u-Law, A-Law)
M....

Avaya, Inc. - 127 - PARTNER ACS 1600 DSL module User Guide
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter. 

Avaya, Inc. - 128 - PARTNER ACS 1600 DSL module User Guide
7. Router configuration
This chapter describes how to configure the PARTNER ACS
1600 DSL module as a router.  For more information on the
menus, submenus and commands in this chapter, see the
“Menu interface” chapter.
A router is a network layer device that uses one or more
metrics to determine the optimal path along which network
traffic should be forwarded.  Routers forward packets from
one network to another based on network layer...

Avaya, Inc. - 129 - PARTNER ACS 1600 DSL module User Guide
To configure an IP address:
1. On the Main Menu, select Configure IP Router.
The Router Configuration Menu displays.
*****************************************
* Router Configuration Menu *
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS Client
H....