Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

							Avaya, Inc. - 120 - PARTNER ACS 1600 DSL module User Guide
4. Show Current DLCIs
3. Select Delete DLCI.
4. Do one of the following:
To delete the DLCI configuration, type y.
To cancel the deletion, type n.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Configuring
Frame Relay
options
The PARTNER ACS 1600 DSL module contains commands
that allow you to configure or display the following Frame
Relay options:
Fragmentation
Maintenance Protocol
Congestion Parameters
Configuring fragmentation
To configure fragmentation:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure FR Options.
The Frame Relay Options submenu displays.
*****************************************
* Frame Relay Options *
*****************************************
1. Configure Fragmentation
2. Configure Maintenance Protocol
3. Configure Congestion Parameters 
						

							Avaya, Inc. - 121 - PARTNER ACS 1600 DSL module User Guide
3. Select Configure Fragmentation.
The FR Fragmentation Configuration submenu displays.
*****************************************
* FR Fragmentation Configuration *
*****************************************
1. Configure FRF.12 Fragmentation
2. Configure CopperMountain Fragmentation
4. Do one of the following:
Select Configure FRF.12 Fragmentation.
The FR FRF.12 Configuration submenu displays.
*************************************
* FR FRF.12 Configuration *
**************************************
1. Enable/Disable FRF.12
2. Enable Automatic Fragment Sizing
3. Set Manual Fragment Size
Select your choice, and then follow the on-screen
instructions.
Select Configure CopperMountain
Fragmentation.
The FR FRF.12 Configuration submenu displays.
*************************************
* FR FRF.12 Configuration *
*************************************
1. Enable/Disable CuMtn
Fragmentation
2. Set Real-Time DLCI
Select your choice, and then follow the on-screen
instructions.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter. 
						

							Avaya, Inc. - 122 - PARTNER ACS 1600 DSL module User Guide
Configuring the maintenance protocol
To configure the maintenance protocol:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure FR Options.
The Frame Relay Options submenu displays.
*****************************************
* Frame Relay Options *
*****************************************
1. Configure Fragmentation
2. Configure Maintenance Protocol
3. Configure Congestion Parameters
3. Select Configure Maintenance Protocol.
The Frame Relay Maintenance Protocol submenu
displays.
*****************************************
* Frame Relay Maintenance Protocol *
*****************************************
0. None
1. CCITT Q.933 Annex A Network
2. CCITT Q.933 Annex A User
3. CCITT Q.933 Annex A Both
4. ANSI T1.617 Annex D Network
5. ANSI T1.617 Annex D User
6. ANSI T1.617 Annex D Both
7. LMI Network (FRF.1.1)
8. LMI User (FRF.1.1)
9. LMI Both (FRF.1.1)
4. Type the number that corresponds to the protocol on your
network, and then press ENTER.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter. 
						

							Avaya, Inc. - 123 - PARTNER ACS 1600 DSL module User Guide
Configuring the congestion parameters
To configure the congestion parameters:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure FR Options.
The Frame Relay Options submenu displays.
*****************************************
* Frame Relay Options *
*****************************************
1. Configure Fragmentation
2. Configure Maintenance Protocol
3. Configure Congestion Parameters
3. Select Configure Congestion Parameters.
The FR Congestion Configuration submenu displays.
*****************************************
* FR Congestion Configuration *
*****************************************
1. Configure Transmit Congestion
Parameters
2. Configure Receive Congestion
Parameters
4. Do one of the following.
Select Configure Transmit Congestion
Parameters, and then follow the on-screen
messages to set:
FECN/BECN condition set size
FECN/BECN condition clear size
FECN/BECN max number of bytes to store
Select Configure Receive Congestion
Parameters, and then follow the on-screen
messages to:
FECN/BECN condition set size
FECN/BECN condition clear size
FECN/BECN max number of bytes to store
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on 
						

							Avaya, Inc. - 124 - PARTNER ACS 1600 DSL module User Guide
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Configuring
the voice path
After you define the voice PVCs and DLCIs, you need to
perform the following steps to configure the voice path:
Set the jitter delay
Set the SLIC control mode
Set the echo cancellation
Setting the jitter delay
When the jitter delay is set, the PARTNER ACS 1600 DSL
module holds the incoming packet data from the WAN voice
channel to allow for variance in packet arrival time.  The time
that you set for the jitter delay depends on the data rate in use
– the lower the data rate, the higher the delay.
To set the jitter delay
1. On the Main Menu, select VoicePath Configure.
The Voice Configuration submenu displays.
*****************************************
* Voice Configuration *
*****************************************
V. Set Voice Gateway
J. Set Jitter Delay
D. Display Jitter Delay
T. Set SLIC Control Mode
U. Set Compander Mode (u-Law, A-Law)
M. Set Debug Mode
E. Configure Echo Cancellation Default
Settings
2. Select Set Jitter Delay.
The following instructions display on-screen:
Enter number of ms to delay :
3. Type the number of ms to delay, and then press ENTER.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter. 
						

							Avaya, Inc. - 125 - PARTNER ACS 1600 DSL module User Guide
Setting the SLIC Control Mode
To set the SLIC control mode:
1. On the Main Menu, select VoicePath Configure.
The Voice Configuration submenu displays.
*****************************************
* Voice Configuration *
*****************************************
V. Set Voice Gateway
J. Set Jitter Delay
D. Display Jitter Delay
T. Set SLIC Control Mode
U. Set Compander Mode (u-Law, A-Law)
M. Set Debug Mode
E. Configure Echo Cancellation Default
Settings
2. Select Select SLIC Control Mode.
The SLIC Control Mode Selection submenu displays.
*****************************************
* SLIC Control Mode Selection *
*****************************************
Current Control Mode = MANUAL Control
Mode
A. AUTO Control Mode
M. MANUAL Control Mode
3. Select your choice.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Configuring Echo Cancellation
When you enable echo cancellation, it isolates and filters
unwanted digital signals caused by echoes from the main
transmitted signal.
Echo cancellation automatically disables when the PARTNER
ACS 1600 DSL module detects a FAX or modem signal.  At 
						

							Avaya, Inc. - 126 - PARTNER ACS 1600 DSL module User Guide
the conclusion of the FAX or modem session, echo
cancellation automatically re-enables.
To configure echo cancellation:
1. On the Main Menu, select VoicePath Configure.
The Voice Configuration submenu displays.
*****************************************
* Voice Configuration *
*****************************************
V. Set Voice Gateway
J. Set Jitter Delay
D. Display Jitter Delay
T. Set SLIC Control Mode
U. Set Compander Mode (u-Law, A-Law)
M. Set Debug Mode
E. Configure Echo Cancellation Default
Settings
2. Select Configure Echo Cancellation Default Settings.
The Echo Cancellation Default Settings Configure
Menu displays.
*******************************************
* Echo Cancellation Default Settings
Configure Menu *
*******************************************
1. Set Echo Cancellation default setting
for all ports
2. Display current Echo Cancellation
default settings
3. Configure Echo Cancellation default
setting per port
3. Do one of the following, and then follow the on-screen
messages:
To set the same setting for all ports, select Set
Echo Cancellation default setting for all ports.
To display the current settings for all ports, select
Display current Echo Cancellation default
settings.
To set echo cancellation by port, select Configure
Echo Cancellation default setting per port.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on 
						

							Avaya, Inc. - 127 - PARTNER ACS 1600 DSL module User Guide
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter. 
						

							Avaya, Inc. - 128 - PARTNER ACS 1600 DSL module User Guide
7. Router configuration
This chapter describes how to configure the PARTNER ACS
1600 DSL module as a router.  For more information on the
menus, submenus and commands in this chapter, see the
“Menu interface” chapter.
A router is a network layer device that uses one or more
metrics to determine the optimal path along which network
traffic should be forwarded.  Routers forward packets from
one network to another based on network layer information.
Occasionally called a gateway (although this definition of
gateway is becoming increasingly outdated).
You must complete the following steps to configure the
PARTNER ACS 1600 DSL module as a router:
Configure IP addresses on the LAN and WAN ports
Enable the Routing Information Protocol (RIP)
poisoned reverse (recommended), add a static route or
add a default route
Disable bridging globally
Disable bridging by port
Disable the Spanning Tree Protocol (STP) globally
Disable STP by port
You can configure the PARTNER ACS 1600 DSL module as
both a router and a bridge – it depends on your application.  A
router can improve overall efficiency for a complex network,
but a bridge provides better speed and flexibility for the overall
network.
Configuring an
IP address
To configure the PARTNER ACS 1600 DSL module as a
router, you must assign an IP address to both the LAN and
WAN ports – each with different subnet masks.
You can assign up to 8 IP addresses on each of the WAN and
LAN ports. 
						

							Avaya, Inc. - 129 - PARTNER ACS 1600 DSL module User Guide
To configure an IP address:
1. On the Main Menu, select Configure IP Router.
The Router Configuration Menu displays.
*****************************************
* Router Configuration Menu *
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
L. Configure DHCP Relay
T. Configure Telnet Server Port
F. Configure IP Filtering
D. Display Route Table
2. Select Configure Port IP Address.
The following instructions display on-screen:
Available Interfaces :
1. SDSL
2. 10/100BaseT Ethernet
3. Universal Serial
0. (Abort)
Selection :
Interfaces may or may not display, depending on the IAD
in use.
3. Type the number of the port for which you want to
configure an IP address.
The following message (or one similar) displays:
IP interfaces on port 1:
ID IPAddr
IPMaskPriority
0 255.255.255.0 255.255.255.0 NORMAL
Enter connection to configure:
4. Type the ID number of the connection that you want to
configure (range = 0-7), and then press ENTER.