Home
>
Avaya
>
Communications System
>
Avaya Partner Advanced Communications System 1600 Dsl Module User Guide
Avaya Partner Advanced Communications System 1600 Dsl Module User Guide
Have a look at the manual Avaya Partner Advanced Communications System 1600 Dsl Module User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 16 Avaya manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Avaya, Inc. - 140 - PARTNER ACS 1600 DSL module User Guide R. Configure Spanning Tree Bridge Priority Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry 2. Select Enable/Disable Spanning Tree Globally, and the type D. The Bridge Configuration Menu redisplays. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Disabling STP by port To disable STP by port: 1. On the Main Menu, select Configure Bridge. The Bridge Configuration Menu displays. ***************************************** * Bridge Configuration Menu * ***************************************** G. Enable/Disable Bridging Globally P. Enable/Disable Bridging by Port A. Configure Bridge Aging Timer T. Enable/Disable Spanning Tree Globally O. Enable/Disable Spanning Tree by Port R. Configure Spanning Tree Bridge Priority Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry
Avaya, Inc. - 141 - PARTNER ACS 1600 DSL module User Guide 2. Select Enable/Disable Spanning Tree by Port. The following instructions display on-screen: Available Interfaces : 1. SDSL 2. 10/100BaseT Ethernet 3. Universal Serial 0. (Abort) Selection : Interfaces may or may not display, depending on the IAD in use. 3. Type the number of the port for which you want to disable STP, and then type D. The Bridge Configuration Menu redisplays. 4. Repeat steps 1-3 for each port on which you want to disable STP. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.
Avaya, Inc. - 142 - PARTNER ACS 1600 DSL module User Guide 8. Bridge configuration This chapter describes how to configure the PARTNER ACS 1600 DSL module as a bridge. For more information on the menus, submenus and commands in this chapter, see the “Menu interface” chapter. A bridge is a device that connects and passes packets between two network segments that use the same communications protocol. Bridges operate at the data link layer (Layer 2) of the OSI reference model. In general, a bridge will filter, forward, or flood an incoming frame based on the MAC address of that frame. Although the PARTNER ACS 1600 DSL module comes with bridging enabled by default, you must still: Enable bridging globally Enable bridging by port Set the bridge aging timer Disable the RIP poisoned reverse globally Disable the RIP poisoned reverse by port Enable STP globally Enable STP by port You can configure the PARTNER ACS 1600 DSL module as both a router and a bridge – it depends on your application. A router can improve overall efficiency for a complex network, but a bridge provides better speed and flexibility for the overall network.
Avaya, Inc. - 143 - PARTNER ACS 1600 DSL module User Guide Enabling Bridging For bridging to work, you must enable bridging both globally and by port, and then set the bridge aging timer. The order in which you perform the procedures is irrelevant. Enabling bridging globally To enable bridging globally: 1. On the Main Menu, select Configure Bridge. The Bridge Configuration Menu displays. ***************************************** * Bridge Configuration Menu * ***************************************** G. Enable/Disable Bridging Globally P. Enable/Disable Bridging by Port A. Configure Bridge Aging Timer T. Enable/Disable Spanning Tree Globally O. Enable/Disable Spanning Tree by Port R. Configure Spanning Tree Bridge Priority Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry 2. Select Enable/Disable Bridging Globally, and the type E. The Bridge Configuration Menu redisplays. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.
Avaya, Inc. - 144 - PARTNER ACS 1600 DSL module User Guide Enabling bridging by port To enable bridging by port: 1. On the Main Menu, select Configure Bridge. The Bridge Configuration Menu displays. ***************************************** * Bridge Configuration Menu * ***************************************** G. Enable/Disable Bridging Globally P. Enable/Disable Bridging by Port A. Configure Bridge Aging Timer T. Enable/Disable Spanning Tree Globally O. Enable/Disable Spanning Tree by Port R. Configure Spanning Tree Bridge Priority Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry 2. Select Enable/Disable Bridging by Port. The following instructions display on-screen: Available Interfaces : 1. SDSL 2. 10/100BaseT Ethernet 3. Universal Serial 0. (Abort) Selection : Interfaces may or may not display, depending on the IAD in use. 3. Type the number of the port for which you want to disable bridging, and then type E. The Bridge Configuration Menu redisplays.
Avaya, Inc. - 145 - PARTNER ACS 1600 DSL module User Guide 4. Repeat steps 1-3 for each port on which you want to disable bridging. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Setting the bridge aging timer The bridge aging timer sets the amount of time that the PARTNER ACS 1600 DSL module keeps a MAC address in the bridging table. When the timer reaches zero, the database deletes the address and creates a new bridge. To set the bridge aging timer: 1. On the Main Menu, select Configure Bridge. The Bridge Configuration Menu displays. ***************************************** * Bridge Configuration Menu * ***************************************** G. Enable/Disable Bridging Globally P. Enable/Disable Bridging by Port A. Configure Bridge Aging Timer T. Enable/Disable Spanning Tree Globally O. Enable/Disable Spanning Tree by Port R. Configure Spanning Tree Bridge Priority Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry 2. Select Configure Bridge Aging Timer. The following instructions display on-screen: Enter Bridge Aging time in seconds (1..3600): (300) 3. Type the bridge aging time (range = 1-3600 seconds), or press ENTER to accept the default of 300 seconds.
Avaya, Inc. - 146 - PARTNER ACS 1600 DSL module User Guide 4. Press any key. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Disabling RIP poisoned reverse Conversely, for bridging to work, you must disable RIP both globally and locally (by port). The order in which you perform the procedures is irrelevant. Disabling RIP poisoned reverse globally To disable RIP poisoned reverse globally: 1. On the Main Menu, select Configure IP Router. The Router Configuration Menu displays. ***************************************** * Router Configuration Menu * ***************************************** C. Configure Port IP Address U. Unconfigure Port IP Address S. Add/Remove a Static Route R. Enable/Disable RIP V. Configure RIP Version by Port P. Configure RIP Poisoned Reverse by Port N. Configure DNS Client H. Configure DHCP Client L. Configure DHCP Relay T. Configure Telnet Server Port F. Configure IP Filtering D. Display Route Table 2. Select Enable/Disable RIP, and then type D. The Router Configuration Menu redisplays. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.
Avaya, Inc. - 147 - PARTNER ACS 1600 DSL module User Guide Disabling RIP poisoned reverse by port To disable RIP poisoned reverse by port: 1. On the Main Menu, select Configure IP Router. The Router Configuration Menu displays. ***************************************** * Router Configuration Menu * ***************************************** C. Configure Port IP Address U. Unconfigure Port IP Address S. Add/Remove a Static Route R. Enable/Disable RIP V. Configure RIP Version by Port P. Configure RIP Poisoned Reverse by Port N. Configure DNS Client H. Configure DHCP Client L. Configure DHCP Relay T. Configure Telnet Server Port F. Configure IP Filtering D. Display Route Table 2. Select Configure RIP Poisoned Reverse by Port. The following instructions display on-screen: Available Interfaces : 1. SDSL 2. 10/100BaseT Ethernet 3. Universal Serial 0. (Abort) Selection : Interfaces may or may not display, depending on the IAD in use. 3. Type the number of the port for which you want to disable poisoned reverse. The following instructions display on-screen: RIP Poisoned Reverse for Slot 1, Port 1 is currently DISABLED Enter E to Enable, D to Disable : 4. Type D. The Router Configuration Menu resplays.
Avaya, Inc. - 148 - PARTNER ACS 1600 DSL module User Guide 5. Repeat steps 1-4 for each port for which you want to disable RIP poisoned reverse. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Enabling STP Having many bridges creates the potential for network loops. A loop presents conflicting information about the segment on which a specific address is located and forces the bridge to forward all data. When you enable STP, the PARTNER ACS 1600 DSL module reconfigures the bridge network to channel data along an optimum route to its destination. To configure the PARTNER ACS 1600 DSL module as a bridge, you must enable STP both globally and by port. Enabling STP globally To enable STP globally: 1. On the Main Menu, select Configure Bridge. The Bridge Configuration Menu displays. ***************************************** * Bridge Configuration Menu * ***************************************** G. Enable/Disable Bridging Globally P. Enable/Disable Bridging by Port A. Configure Bridge Aging Timer T. Enable/Disable Spanning Tree Globally O. Enable/Disable Spanning Tree by Port R. Configure Spanning Tree Bridge Priority Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry
Avaya, Inc. - 149 - PARTNER ACS 1600 DSL module User Guide 2. Select Enable/Disable Spanning Tree Globally, and the type E. The Bridge Configuration Menu redisplays. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Enabling STP by port To enable STP by port: 1. On the Main Menu, select Configure Bridge. The Bridge Configuration Menu displays. ***************************************** * Bridge Configuration Menu * ***************************************** G. Enable/Disable Bridging Globally P. Enable/Disable Bridging by Port A. Configure Bridge Aging Timer T. Enable/Disable Spanning Tree Globally O. Enable/Disable Spanning Tree by Port R. Configure Spanning Tree Bridge Priority Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry 2. Select Enable/Disable Spanning Tree by Port. The following instructions display on-screen: Available Interfaces : 1. SDSL 2. 10/100BaseT Ethernet 3. Universal Serial 0. (Abort) Selection : Interfaces may or may not display, depending on the IAD in use.