Avaya Partner Advanced Communications System 1600 Dsl Module User Guide

							Avaya, Inc. - 100 - PARTNER ACS 1600 DSL module User Guide
R. Hard Reset or Reload ACOS from FLASH
D. Set System Defaults
W. Save System Settings as Defaults
F. File System Menu
X. File Transfer Menu
2. Select File System Menu.
The File System Menu displays.
*****************************************
* File System Menu
*****************************************
D. Directory of all files
C. Copy file
R. Rename File
X. Remove File by name
F. Format File System drive
S. Space left in File System
3. Select Directory of all files.
A list of all installed files displays.
Support
For Technical Support, contact you local Authorized Dealer or
call the Avaya Help Line at 800 628 2888.  Consultation
charges may apply. 
						

							Avaya, Inc. - 101 - PARTNER ACS 1600 DSL module User Guide
6. WAN configuration
This chapter details how to configure the PARTNER ACS
1600 DSL module for both data and voice operation.  To do
so, you must:
Configure the datalink protocol
Configure the physical interface **
Configure ATM PVCs and ATM options (Datalink
protocol = ATM)
Configure Frame Relay DLCIs and Configure Frame
Relay options
 (Datalink protocol = Frame Relay)
Configure the voice path
For the PARTNER ACS 1600 DSL module , you can also use
the Quick Configuration command to configure the physical
interface.  For more information, see the “Quick Configuration”
section later in this chapter.
Voice and data traffic area each carried in their own PVCs
(protocol = ATM) or DLCI (protocol = Frame Relay).  The data
payload in the PVC/DLCI identifies the voice ports and you
can define up to 8 data ports.
For more information on the menus, submenus and
commands in this chapter, see the “Menu interface” chapter.
Changing the
Datalink
Protocol
To change the datalink protocol:
1. On the Main Menu, select Configure WAN.
The WAN Configuration Menu displays.
*****************************************
* WAN Configuration Menu *
*****************************************
1. Configure Datalink Protocol
2. Configure Physical Interface
3. Configure DLCIs
4. Configure FR Options 
						

							Avaya, Inc. - 102 - PARTNER ACS 1600 DSL module User Guide
2. Select Configure Datalink Protocol.
The WAN Datalink Protocol Configuration Menu
displays.
*******************************************
* WAN Datalink Protocol Configuration Menu*
*******************************************
Current DataLink Protocol : Frame Relay
6. ATM
7. Frame Relay
3. Select your choice.
If you select Frame Relay, you must also add or modify a
DLCI and then set the Frame Relay options.
For more information, see the “Configuring Frame Relay
DLCIs” and “Configuring Frame Relay options” sections
later in this chapter, respectively.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
You can now configure the physical interface.
Configuring
the Physical
Interface
The following are the WAN interfaces that you can configure:
SDSL
USI 
						

							Avaya, Inc. - 103 - PARTNER ACS 1600 DSL module User Guide
Configuring the SDSL Interface
To configure the SDSL interface:
1. On the Main Menu, select Configure WAN.
The following instructions display on-screen:
Available WAN Interfaces:
1. SDSL
3. Universal Serial
0. (Abort)
Enter slot number of WAN interface to
configure:
2. Type 1.
The WAN Configuration Menu displays.
*****************************************
* WAN Configuration Menu *
*****************************************
Configuring SDSL
0. Quick Configuration
1. Configure Datalink Protocol
2. Configure Physical Interface
3. Select Configure Physical Interface.
The SDSL Configuration submenu displays.
*******************************************
* SDSL Configuration *
*******************************************
Current SDSL configuration:
CPE, AUTO Cycle, Bit Order: Sign.Mag,
SPEED = 1152 Kbps, Conexant AutoBaud:
Disabled
1. Toggle SDSL Mode (CO or CPE)
2. Set SDSL Speed to Auto Cycle (Nokia)
3. Set SDSL Speed to Auto Sense (Copper
Mountain)
4. Enable/Disable Conexant AutoBaud Mode
5. Set SDSL Sync Delay (Lucent) 
						

							Avaya, Inc. - 104 - PARTNER ACS 1600 DSL module User Guide
6. Set SDSL to AccessLan CPE Mode
7. Set SDSL Speed Manually
8. Restart SDSL Activation Sequence
9. SDSL Interface Mode (Bit Order)
A. Enable/Disable SDSL AutoBaud Debug
Messages
D. Enable/Disable SDSL Debug Messages
Y. Enable/Disable Sync Msgs
P. Preactivation Debug Mode
4. Select your choice.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Configuring the USI interface
To configure the USI interface:
1. On the Main Menu, select Configure WAN.
The following instructions display on-screen:
Available WAN Interfaces:
1. SDSL
3. Universal Serial
0. (Abort)
Enter slot number of WAN interface to
configure:
2. Type 3.
The WAN Configuration Menu displays.
*****************************************
* WAN Configuration Menu *
*****************************************
Configuring Universal Serial
1. Configure Datalink Protocol
2. Configure Physical Interface
ESC to return to previous menu 
						

							Avaya, Inc. - 105 - PARTNER ACS 1600 DSL module User Guide
3. Select Configure Datalink Protocol.
The WAN Datalink Protocol Configuration Menu
displays.
*******************************************
* WAN Datalink Protocol Configuration Menu*
*******************************************
Current DataLink Protocol : Cisco
compatible HDLC
6. ATM
7. Frame Relay
ESC to return to previous menu
4. Select your choice, and then press ESC.
If you select Frame Relay, you must also add or modify a
DLCI and then set the Frame Relay options.  For more
information, see the “Configuring Frame Relay DLCIs” and
“Configuring Frame Relay options” sections later in this
chapter, respectively.
The WAN Configuration Menu redisplays.
5. Select Configure Physical Interface.
The USI Configuration submenu displays.
*****************************************
* USI Configuration *
*****************************************
1. Set WAN interface type
2. Configure Data Rate and Clocking
Options
ESC to return to previous menu 
						

							Avaya, Inc. - 106 - PARTNER ACS 1600 DSL module User Guide
6. Select Set WAN interface type.
The USI Interface Type submenu displays.
**********************************
* USI Interface Type *
**********************************
USI WAN mode is now: V.10 V.11 Termination
Enabled
1. RS-530
2. V.35
7. Select your choice, and then press ESC.
The USI Configuration submenu redisplays.
8. Select Configure Data Rate and Clocking Options.
The Serial Interface Clock Speed Options Menu
displays.
*******************************************
* Serial Interface Clock Speed Option Menu*
*******************************************
- Serial Data Rate Tracks SDSL WAN Speed:
0
- Receive Clock is External
1. Track USI speed to SDSL speed
2. Set Clock Speed Manually
3. Use Internal Receive Clock
4. Use External Receive Clock
ESC to return to previous menu
9. Select your choice.
For optimal results, select Track USI speed to SDSL
speed and Use Internal Receive Clock.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect.  For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter. 
						

							Avaya, Inc. - 107 - PARTNER ACS 1600 DSL module User Guide
Quick
Configuration
The PARTNER ACS 1600 DSL module contains with a
number of predefined configurations.
To use one of the predefined configurations:
1. On the Main Menu, select Configure WAN.
The following instructions display on-screen:
Available WAN Interfaces:
1. SDSL
3. Universal Serial
0. (Abort)
Enter slot number of WAN interface to
configure:
2. Type 1.
The WAN Configuration Menu displays.
*****************************************
* WAN Configuration Menu *
*****************************************
Configuring SDSL
0. Quick Configuration
1. Configure Datalink Protocol
2. Configure Physical Interface 
						

							Avaya, Inc. - 108 - PARTNER ACS 1600 DSL module User Guide
3. Select Quick Configuration.
The Quick Configuration submenu displays.
*****************************************
* Quick Configuration *
*****************************************
** System will reset after changing
configuration **
Current configuration:
Differs from listed configurations
1. Lucent Stinger (Conexant Autobaud,
Payload Scrambling)
2. Nokia (Auto Cycle)
3. Copper Mountain (Auto Sense)
4. Paradyne (Framed 784kbps, Payload
Scrambling)
5. AccessLan CPE
6. Nortel IMAS
7. ATM (Unframed, 1152kbps fixed)
8. Frame Relay (784kbps fixed)
4. Select the DLSAM to which the PARTNER ACS 1600 DSL
module is connecting.
The PARTNER ACS 1600 DSL module automatically
restarts.
5. Log back on to the PARTNER ACS 1600 DSL module .
For more information, see the “Getting started” chapter.
You can now configure PVCs or DLCIs.  However, you must
first change the datalink protocol to ATM (PVCs) or Frame
Relay (DLCIs).
Configuring
ATM PVCs
The PARTNER ACS 1600 DSL module contains commands
that allow you to configure ATM PVCs:
Add New PVC
Modify Existing PVC 
						

							Avaya, Inc. - 109 - PARTNER ACS 1600 DSL module User Guide
Delete PVC
Show Current PVCs
You can configure up to 24 PVCs on the PARTNER ACS
1600 DSL module.
Adding a PVC
To add a PVC:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure PVCs.
The ATM PVC Config Menu displays.
*****************************************
* ATM PVC Config Menu *
*****************************************
1. Add New PVC
2. Modify Existing PVC
3. Delete PVC
4. Show Current PVCs
3. Select Add New PVC.
4. Type a VPI between 0-255 (default = 0), and then press
ENTER.
5. Type a VCI between 32 – 65535 (default = 38 – data or 39
– voice), and then press ENTER.
The ATM Encapsulation Configuration submenu
displays.
*****************************************
* ATM Encapsulation Configuration *
*****************************************
Current Encapsulation : NONE
1. AAL5 (None)
2. AAL0 (None)
3. Proprietary Voice
4. RFC 1483 (using VC Muxing)
5. RFC 1483 (with LLC Encapsulation)
6. RFC 2364 (PPPoATM with LLC
Encapsulation)
7. RFC 2364 (PPPoATM using VC Muxing)