ATT Passageway For Partner Communications System User Guide

Using AT&TBuzz
3.Select the OK button.
If you want to be prompted for Hold or Drop on each attempt select the
Choose to Hold or Drop option in the Answering Second Call group.
Setting AT&TBuzz to Show the
Associated AT&TCall Card Automatically
When running in Match to AT&TCall File mode, AT&TBuzz enables you to
specify whether you want AT&TBuzz to display automatically the AT&TCall
card associated with the Caller ID of the incoming call. If you want AT&TBuzz
to display the card automatically, you must...

Using AT&TBuzz
Setting the AT&TBuzz Window to
Appear Automatically
You can set the AT&TBuzz window to be brought to the front or restored from
its icon automatically when a call rings. To set the AT&TBuzz window to
appear automatically when a call rings:
1.Select Options. . . from the Setup menu.
The Options dialog box appears.
2.Click on the Show AT&TBuzz on Ringing check box to enable or disable
the automatic appearance of the AT&TBuzz window when your
telephone rings. An x in the check box indicates...

Using AT&TBuzz
Setting the AT&TBuzz Window to Always
be on Top of Other Windows
AT&TBuzz enables you to specify that you want the AT&TBuzz window to be
located on top of all the other open windows, including the active window. To
specify that the AT&TBuzz window is always on top of other windows, select
Always on Top from the Setup menu. A check mark appears next to the
Always on Top option, indicating that the option is activated. The AT&TBuzz
window will now remain in front of all the other windows you...

Using AT&TBuzz
2.Click on the Automatic Inspect Mode check box to enable or disable
Automatic Inspect Mode. An x in the check box indicates that
Automatic Inspect Mode is enabled.
3.When you are finished, select the OK button.
Setting the Run Mode for AT&TBuzz
You can set AT&TBuzz to operate in one of the following three modes:
n
n
nNo Matching, where AT&TBuzz displays the Caller ID for each call (if
available), but does not display an associated Call Label.
Match to AT&TCall File, which enables you to...

Using AT&TBuzz
3.Select the OK button.
When you select the Match to AT&TCall File option for the first time,
AT&TBuzz will prompt you to enter your area code.
When you select the Export via Paste Link DDE Mode option, you will
display two dialog boxes.
Setting AT&TBuzz to Log Incoming Calls
AT&TBuzz enables you to specify whether you want incoming calls logged in
the Call Log. However, incoming call logging is only done while AT&TBuzz is
running. If you want incoming calls logged, you must then specify...

Using AT&TBuzz
Showing the Card of an Incoming Call
on Demand
When running in Match to AT&TCall File mode, AT&TBuzz enables you to
view on demand the associated card of an incoming call. However, you can
only perform this procedure if the Caller ID for that call matches the contents of
a dialable number field of one or more cards in the associated AT&TCall file.
You can view the associated card using either the Show Card button in the
Tool bar of the AT&TBuzz window or the Show Card option from the...

Using AT&TBuzz
2.Select Timer.
The Timer window appears and immediately starts keeping time. The
Timer measures time in hours, minutes, and seconds. To reset the
Timer, select the Reset button. To stop the Timer, select the Stop
button. To restart the timer after it has been stopped, select the Start
button.
3.When you are finished using the Timer, select Close from the Control-
menu box of the Timer window.
3-22 

Using AT&TBuzz
AT&TBuzz Menu Bar Options
AT&TBuzz provides the following options in the menu bar:
n    Setup
n     Controls
n     Help
This section describes the options contained in each AT&TBuzz menu.
Setup
The Setup menu contains the following options:
n
n
n
n
n
nRun Mode...
Options...
Initialize Paste Link DDE (only available when AT&TBuzz is running in
Export via Paste Link DDE mode)
Reset Default Window
Always on Top
Exit
Run Mode. . .
Enables you to specify whether you want AT&TBuzz to display the...

Using AT&TBuzz
Options...
Enables you to set the following options:
n
n
n
n
n
nShow AT&TCall Card (if AT&TBuzz is operating in Match to AT&TCall
File mode)
Answering Second Call
Call Logging
Automatic Inspect Mode
Show AT&TBuzz on Ringing
Local Area Code (if AT&TBuzz is operating in Match to AT&TCall File
mode)
Initialize Paste Link DDE
Initializes AT&TBuzz for exporting via Paste Link DDE. This option overwrites
the contents of the clipboard and is only available when AT&TBuzz is
operating in Export via...

Using AT&TBuzz
Exit
Closes the AT&TBuzz application.
Controls
The Controls menu contains the following options:
n     Answer
n     Hang Up
n     Hold
n     Show Card
n     New Card
n     Accessories
Answer
Enables you to answer the selected call if it is ringing or on hold.
Hang up
Enables you to hang up the selected call if it is active.
Hold
Enables you to place the active call on hold.
Show Card
Enables you to view the associated AT&TCall card (if available) for the
selected call if a match exists in...