ATT Passageway For Partner Communications System User Guide

Installing and Setting Up PassageWay Solution
To set up AT&TBuzz initially, perform the following steps:
1.Double-click on the AT&TBuzz icon.
The AT&TBuzz Initialization dialog box appears.
Figure 2-17. AT&TBuzz Initialization Dialog Box
2.
Select the Continue button.
The Run Mode dialog box appears.
2-26 

Installing and Setting Up PassageWay Solution
Figure 2-18. Run Mode Dialog Box
/NOTE:
If you have a PARTNER II Release 3.0 or later system, and no Caller ID
Inspect button is programmed on your telephone, the No Caller ID Inspect
dialog box appears. If you do not want to program a Caller ID Inspect button,
select the Continue button to access the Run Mode dialog box.
A Caller ID Inspect button is important if you want to access the Caller ID
information for outside calls. Without a Caller ID Inspect...

Installing and Setting Up PassageWay Solution
However, to use Caller ID, you must have a PARTNER II Release 3.0 or later
system that has lines subscribed to Caller ID from your local telephone
company. In addition, these lines must be plugged into a PARTNER 206EC or
400EC module on your PARTNER system. If your system does not meet these
requirements, it is unnecessary for you to program a Caller ID Inspect button.
If your system does meet these requirements, you should program a Caller ID
Inspect button...

Installing and Setting Up PassageWay Solution
A message box states that the initialization process is complete.
2.
Select the OK button.
The AT&TBuzz icon appears at the bottom of your screen.
Figure 2-19. AT&TBuzz Running in No Matching Mode
3.Proceed to Setting User Options.
2-29 

Installing and Setting Up PassageWay Solution
Match to AT&TCall File Mode
The Match to AT&TCall File mode integrates AT&TBuzz with AT&TCall, giving
you a direct link between the Caller ID of incoming calls and an AT&TCall file.
In this mode, you associate AT&TBuzz with an AT&TCall file. When you
receive an incoming call, AT&TBuzz automatically searches the telephone
numbers on every card in the AT&TCall file. If the Caller ID from the incoming
call matches a telephone number in one of the cards in the...

Installing and Setting Up PassageWav Solution
create a new AT&TCall file. Refer to Chapter 3 to associate a new
AT&TCall file with AT&TBuzz.
3.Select the Continue button.
The Area Code dialog box appears.
Figure 2-20. Area Code Dialog Box
4.Enter the area code for the local area and select the OK button.
AT&TBuzz displays a message box indicating that the initialization
process is complete.
5.Select the OK button.
The AT&TBuzz icon and the icon for the associated AT&TCall file
appear.
2-31 

Installing and Setting Up PassageWay Solution
Figure 2-21. AT&TBuzz Running in Match to AT&TCall File Mode
6.Proceed to Setting User Options.
Export via Paste Link DDE Mode
The Export via Paste Link DDE mode enables AT&TBuzz to export the Caller
ID and the line label to another Windows application that supports Paste Link
DDE. In turn, AT&TBuzz may receive a string from that other Windows
application and use that string as a Call Label.
2-32 

Installing and Setting Up PassageWav Solution
To use this option, you must meet the following requirements:
nThe application that receives the Caller ID must support paste link DDE.
nYou must have a user-customized interface in the application that
receives the Caller ID. Examples are provided in the Readme file for
AT&TBuzz.
nYour PARTNER system must support Caller ID.
For more information on Export via Paste Link DDE mode, refer to
Appendix C.
/
To configure AT&TBuzz to run in Export via Paste Link DDE...

Installing and Setting Up PassageWay Solution
Figure 2-22. AT&TBuzz Initialization Dialog Box
3.Select the Yes button.
The following message box appears.
Figure 2-23. AT&TBuzz Information Dialog Box
4.Select the OK button.
The AT&TBuzz icon appears at the bottom of your screen.
2-34 

Installing and Setting Up PassageWay Solution
Figure 2-24. AT&TBuzz Running in Export via Paste Link DDE Mode
5.Proceed to Setting User Options.
2-35