Home
>
ATT
>
Communications System
>
ATT Definity G1, G3, System 75, 8410 Voice Terminal Instructions Manual
ATT Definity G1, G3, System 75, 8410 Voice Terminal Instructions Manual
Here you can view all the pages of manual ATT Definity G1, G3, System 75, 8410 Voice Terminal Instructions Manual. The ATT manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 1
AT&T DEFINITY® Communications System Generic 1 and Generic 3 and System 75 8410 Voice Terminal Users Guide
Page 2
NOTICE While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, AT&T can assume no responsibility for any errors. Changes or corrections to the informations contained in this document may be incorporated into future issues. TO ORDER COPIES OF THIS DOCUMENT Contact:AT&T Customer Information Center 2855 North Franklin Road P.O. Box 19901 Indianapolis, IN 46219 1 800 432-6600, In Canada: 1 800 255-1242 Order:Document No. AT&T...
Page 3
YOUR RESPONSIBILITY FOR YOUR SYSTEMS SECURITY You are responsible for the security of your system. AT&T does not warrant that this product is immune from or will prevent unauthorized use of common-carrier telecommunication services or facilities accessed through or connected to it. AT&T will not be responsible for any charges that result from such unauthorized use. Product administration to prevent unauthorized use is your responsibility and your system manager should read all documents provided with...
Page 4
Contents Using the Display, Softkeys, and Display Control Buttons11 Entering Softkey Mode and Viewing the Three Feature Option Screens 11 Other Softkey Features That May Be On Your Display13 Using the Softkeys to Activate a Feature14 Your 8410 Voice Terminal1 A Quick Look at the Features5 Voice Features5 Display Features and Features Used with the Softkeys8 How to Use the Features9 General Instructions9 Conventions Used in the Following Procedures10 Troubleshooting (Later in this Guide)10 Quick Reference...
Page 5
Priority Calling 29 Reset Speakerphone 30 Select Ring (and Ringer Volume) 32 Send All Calls33 Speaker34 Speakerphone36 Test37 Transfer38 Display Feature Procedures39 Call Information39 Directory40 Exit (Normal)41 Inspect41 Message Retrieval 42 Normal (Exit)43 Stored Number 43 Time/Date44 Timer44 Tones and Their Meanings 45 Ringing Tones 45 Feedback Tones 45 Troubleshooting46 System 75 Version Notes47 Key Words to Know48 Quick Reference Lists ii
Page 6
Your 8410 Voice Terminal The 8410 voice terminal is available in two models: one with a display and one without a display. The display, along with the softkeys and display control buttons, offers the user valuable added functionality. Both models are comprehensively equipped so you can make the best use of the many features of the AT&T DEFINITY® Communications System Generic 1 or Generic 3 and System 75. Figure 1 below depicts the display-equipped model. However, both this model and the 8410 without a...
Page 7
Starting with the upper right corner of Figure 1 and continuing clockwise: DisplayA 2-line by 24-character display. SoftkeysThe four buttons located below the display and labeled with arrows ( [ s ] ), correspond to words on the display screen. You can use the softkeys along with display control keys to access up to 12 features on your voice terminal in addition to those features administered on the call appearance/feature buttons. For a list of the features that can be accessed with the softkeys, check...
Page 8
Conference buttonFor setting up conference calls. This button is labeled [ Conf ] . Drop buttonFor disconnecting from a call or dropping the last party added to a conference call. Hold/Ring buttonA red button for putting a call on hold. By pressing [ Shift ] and then [ Hold ] , you can select a personalized ring for your voice terminal from eight possible ringing patterns. Speaker/ResetFor accessing the built-in 2-way speakerphone. When Spkr buttonyou press [ Shift ] and then [ Speaker ] (your voice...
Page 9
Transfer button Volume control buttonl l l Handset For transferring a call to another voice terminal. For adjusting the volume of the following: The speakerphone or speaker when a call is in progress using the 2-way speakerphone or 1-way speaker The handset receiver level while a call is in progress using the handset The tone ringer when the speaker is off and either the handset is inactive or the tone ringer is active Note: When the speaker is active, the ringer volume is automatically reduced to a low...
Page 10
A Quick Look at the Features Here are brief descriptions of both voice features and display features that can be used with the 8410 voice terminal. Each description includes what each feature does and how you might want to use it. Note: You will automatically have the following features on your voice terminal: Conference, Drop, Hold, Message, Mute, Select Ring, Test, and Transfer voice features and Normal Mode/the Exit feature (labeled [ Exit ] on the voice terminal) among the display features. You may...