ATT DEFINITY Communications System Generic 3 Planning And Configuration Instructions Manual

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
DISK DRIVE (TN1657) (G3r Only)
Enter the number of:
(A) Center Stage Switches (CSSs)
One disk drive only is needed for a simplex G3r system with a CSS. Two are required for dupli-
cated systems.  Optionally, the disk drive may also be added to increase booting speed.
PEC
____ 63324
PACKET DATA LINE (TN553) (G3r Only)
Every time you have a TN553, youll need at least 1 TN726 port.
Enter the number of:
(A) CDR Ports
(B) Serial printer
(C)...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
ISDN-BRI LINE (TN556)
Enter the number of:
(A) 7505 ISDN-BRI voice terminals
(B) 7506 ISDN-BRI voice terminals
(C) 7507 ISDN-BRI voice terminals
(D) 8503T ISDN-BRI voice terminals
(E) CallVisor ASAI adjuncts
PEC
TOTAL PORTS  ____ ¸12 = ____ 65512
Note:Using a passive bus arrangement, you can have up to 24 voice terminals per circuit
pack.  However, the terminals would have to be voice only.
77 

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
PACKET GATEWAY (TN577) (G3r Only)
Enter the number of:
(A) AUDIX Data Links
(B) 3B Applications (CMS, MSA, CallVisor ISDN Gateway)
(C) DCSs Between Switches
PEC
TOTAL PORTS  ____ ¸4 = ____ 63317
78 

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
ANALOG LINE (TN742)
If you are reusing a TN742 from an earlier system, enter the number of:
(A) 7100 Series Sets ......................................................................................................  ____
(B) 2500/2554-Type Sets (On Premises) ........................................................................  ____
(C) 2500/2554-Type Off-Premises...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Analog Line Circuit Packs
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Feature TN742 TN769 TN746 TN746B TN479
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Number of Ports 8 8 16 16 16bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbNeon Message...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
CALL CLASSIFIER (TN744)
Eight touch-tone receiver ports are provided on each TN744 Call Classifier circuit pack.  The
TN744 circuit pack is used exclusively for receiving touch-tone input for the Call Prompting
feature, classifying outgoing calls for the Answer Detection feature, and classifying outgoing calls
for an outgoing call management system.  Each of these are optional features that must be prop-
erly engineered.  A...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
ANALOG LINE (TN746)
Enter the number of:
(A) 7100 Series Sets ......................................................................................................  ____
(B) 2500/2554-Type Sets (On Premises) ........................................................................  ____
(C) 2500/2554-Type Off-Premises Extensions................................................................  ____
(D) 2500-Type Sets with Message Waiting...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
ANALOG LINE (TN479 - For International DEFINITY G1 Only)
Enter the number of:
(A) 7100 Series Sets ......................................................................................................  ____
(B) 2500/2554-Type Sets (On Premises) ........................................................................  ____
(C) 2500/2554-Type Off-Premises Extensions...................................................................

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
ANALOG LINE (TN769)
This circuit pack is used for voice terminals with neon message waiting lamps.
If you are reusing a TN769 from an earlier system, enter the number of:
(A) 7100 Series Sets ......................................................................................................  ____
(B) 2500/2554-Type Sets (On Premises) ........................................................................  ____
(C) 2500-Type Sets with...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
AUXILIARY TRUNK (TN763)
Enter the number of:
(A) Trunks for Code Calling (Max 10) .............................................................................  ____
(B) Trunks for Loudspeaker Paging Access (Max 10) (See Note) ...................................  ____
(C) Trunks for Recorded Telephone Dictation.................................................................  ____
(D) Music-on-Hold (Max 1)...