ATT DEFINITY Communications System Generic 3 Planning And Configuration Instructions Manual

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
CENTRAL OFFICE LOOP START TRUNK (TN465 - For International DEFINITY Only)
Enter the number of lines that will terminate as either trunk lines or as personal lines:
(A) CO Lines ..................................................................................................................  ____
(B) WATS Lines .............................................................................................................  ____
(C) 800...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
DIGITAL LINE (TN754B)
Enter the number of:
(A) 7401D Terminals ......................................................................................................  ____
(B) 7403D Terminals ......................................................................................................  ____
(C) 7404D Terminals......................................................................................................  ____
(D)...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
DIRECT INWARD DIALING TRUNK (TN753)
Enter the number of:
(A) DID Trunks ...............................................................................................................  ____
(B) Future Growth ..........................................................................................................  ____
PEC
TOTAL PORTS ____ ¸8 = ____ 63116
DIRECT INWARD AND OUTWARD DIALING (DIOD) TRUNK
(TN429 - For International DEFINITY...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
DS1 TIE TRUNK (TN722)
If you are reusing a TN722 circuit pack from an earlier system, enter the number of:
(A) Voice Grade Data Tie Trunks * .................................................................................  ____
(B) Alternate Voice/Data Tie Trunks * .............................................................................  ____
(C) DMI Tie Trunks *...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
32-CHANNEL E1 TRUNK (TN464 - For International DEFINITY G1 and G3r)
Enter the number of:
(A) Voice Grade Data Tie Trunks * .................................................................................  ____
(B) Alternate Voice/Data Tie Trunks * .............................................................................  ____
(C) DMI Tie Trunks *...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
HYBRID LINE (TN762)
Enter the number of:
(A) 7303S Terminals ......................................................................................................  ____
(B) 7305S Terminals ......................................................................................................  ____
(C) 7302H Terminals......................................................................................................  ____
(D)...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
MET LINE (TN735)
Enter the number of METs:
(A) 10 Button .................................................................................................................  ____
(B) 20 Button .................................................................................................................  ____
(C) 30 Button ....................................................................................................................

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
TONE CLOCK (TN768)
For G1 and G3, Tone Clock TN768 is always required instead of TN741 or TN714.  G1 and G3
multi-carrier cabinets ship with a TN768 as part of the basic PEC.  G1 single-carrier cabinets ship
with a TN756 as part of the basic PEC.  When a G1 single-carrier cabinet system  has the dupli-
cation option, EPN, DS1 service, or OCM, a TN768 Tone Clock (PEC 65515) is required.
When either a TN741 or TN768 is used, the...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
TABLE M.  Summation of Interface Circuit Packs
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Circuit Pack Description PEC Quantity
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
TN429 DIOD Dialing Trunk 63802I
(Intl Only)
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
TN464 32-Channel E1 Trunk 63804I
(Intl and G3r)
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
TN465 CO Loop Start...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
Software Determination
Table N provides a listing of system software PEC codes.
TABLE N.  System Software PEC Codes
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Description G1 PEC G3i PEC G3r PEC
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Basic Voice Applications Software 1233VAS 1236VAS 1263VAS
(always required)
CallVisor Adjunct Switch Application Interface...