ATT DEFINITY Communications System Generic 3 Planning And Configuration Instructions Manual

SYSTEM PARAMETERSaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
TABLE C (continued).
System Parameters
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Item G1 G3i G3r
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
External CMS
Measured agents per system 400 400 1,023
Measured agents per split 30 30 999
Measured splits 32 99 255
Measured trunk groups 99 99 666...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaSYSTEM PARAMETERS
TABLE C 
(continued).
System Parameters
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Item G1 G3i G3r
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Modem Pool Groups
Mode 2/analog 5 5 63
Members per group 32 32 32
Group members per system 160 160 2,016...

SYSTEM PARAMETERSaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
TABLE C (continued).
System Parameters
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Item G1 G3i G3r
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Recorded Announcements
Recorded announcements 64 128 256
Analog queue slots per system 150 150 300
Analog queue slots per announcement 150 150 300
Integrated queue slots per system 50 50 300
Calls...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaSYSTEM PARAMETERS
TABLE C 
(continued).
System Parameters
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Item G1 G3i G3r
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Time Slots
Total slots 1,024 1,536 11,264
Slots for voice and data 966 1,449 10,604
Simultaneous circuit-switched calls 482 723 5,291...

SYSTEM PARAMETERSaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Notes:
Digital data endpoints terminate on a port of the switch.  Up to 800 ports can ter-
minate digital data endpoints.  The remaining system  ports are available for terminat-
ing digital voice terminals, trunks, etc. 1.
For G3, the extensions are shared among the following applications: voice station,
attendant,  data endpoint, hunt group, recorded announcement, TEG, VDN, extension
for failed automatic wakeup messages, attendant...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaSYSTEM PARAMETERS
The following table shows the button module requirements of different station configurations.
TABLE D.  Station Allocation Characteristics
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Required Records Required Records and
Station Type
(G1,G3) Button Units*
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Analog set 500 S S+62
Analog set...

SYSTEM PARAMETERSaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
TABLE D (continued).
Station Allocation Characteristics
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Required Records Required Records and
Station Type
(G1,G3) Button Units*
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Basic Attendant Console A + 2B A
Enhanced Attendant Console A + 2B A
Attendant Selector Console A + 2B A...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaSYSTEM PARAMETERS
Notes:
Regarding station allocation:
1. For G1, [B] is equivalent to B.  For G3, [B] indicates large button modules that are allo-
cated only when a button on that module is administered.
2. Any digital DCP station can add a 7400B, requiring one data module record.
3. A DTDM can be added to a 7403D or 7405D, requiring one data module record.
4. The 6504-T is administered as a 7505D and the 6508-T is administered as a 7507D...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaSYSTEM VERSION DETERMINATION
SYSTEM VERSION DETERMINATION
From the information given in Tables A, C, and D, you should now be able to determine the sys-
tem version needed.  Check the version in one of the boxes provided.
G1 
G3i 
G3r 
43 

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
HARDWARE AND SOFTWARE DETERMINATION
Voice/Data Terminal Equipment Assignments
Use Table E to list the system users and their individual equipment needs. Blank columns are
provided so that you can fill in the name, extension number, application (voice and/or data), type
of terminal equipment, and adjunct(s) required for each user.  A current phone directory and sta-
tion survey may be helpful when filling in this table.
Note:Before...