ATT DEFINITY Communications System Generic 3 Planning And Configuration Instructions Manual

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
TABLE E.  Users and Required Equipment
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Voice and/or
Extension Application Data Terminal
Name Number (Voice/Data) Equipment Adjunct(s)
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
TABLE F.  Voice/Data Terminal Quantities
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Typec cModelc
cQuantitybbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Orderable With G3bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb2500...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
TABLE F (continued).
Voice/Data Terminal Quantities
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Typec cModelc
cQuantitybbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Orderable With G3bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
510Dbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
513 BCTbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
515 BCTbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
610...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
TABLE G.  Adjunct Quantities and Voice Terminal Compatibility
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Adjunct Terminal Function Quantity
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
7405D
7434DAdds 20 call
appearance/feature buttons Call Coverage Module, C401A*...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Instructions
Enter the quantities of terminal equipment to be used in Table H. Both totals must be less than
the allowed maximums for each terminal type.  For each item, enter the quantity in the blank
space provided. If both spaces are blank, enter the quantity in each space where applicable.
TABLE H.  Terminal Equipment Limits
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
TABLE H 
(continued).
Terminal Equipment Limits
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
QuantitybbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbEnhanced Terminal Type
Terminals Term/Modules*
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Data Communications Equipment
Use the following information to determine the data communications equipment requirements for
your system.  Various data communications configurations are described.  The system supports
wideband area networks; private and switched data networks; and local host, terminal, and per-
sonal computer communications.  The information includes the following:
dIllustrations of the physical relationships between the...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
CDR Output Devices and Connections
The CDR output device can be one of the following:
dTELESEER CDR Unit
d94A Local Storage Unit (LSU)
dPrinter
dHost computer
dCustomer-provided equipment such as a personal computer
CDR output devices are connected to DEFINITY Generic 1 or Generic 3 using:
dModular Processor Data Modules (MPDMs)
dModular Trunk Data Modules (MTDMs)
dData Line circuit packs and ADUs
dModems
dDirect EIA-232C...

HARDWARE AND SOFTWARE DETERMINATIONaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Figure 1 shows some of the ways the output devices can be connected.
DIGITAL
LINE CP PART OF DIGITAL SWITCH
DIGITAL
LINE CP
MODULAR TRUNK94A LSUDCP
RS-232C
DCP
RS-232C
APPLICATIONS
RS-232C
DATA
LINE CP ADU
PRINTER 94A LSU
OR
TELESEER
DATA MODULE
MODULAR PROCESSOR
DATA MODULE(MTDM)
MODEM PRIVATE
LINE
TO
HOSTSMDR UNIT
OR PRINTERRS-232C
MPDM
DCP
TELESEER SMDR
UNIT OR(MPDM)
BUILDING
CABLE
RS-232C REMOTE
DCPMTDM
PROCESSOR
PRINTER 94A LSU
OR...

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaHARDWARE AND SOFTWARE DETERMINATION
Data Modules
Data modules are communications devices that provide an interface between the digital switch,
Data Terminal Equipment (DTE), and Data Communications Equipment (DCE).  Data modules
transmit and receive data, converting between the systems Digital Communications Protocol
(DCP) and the following interfaces: EIA-232C, RS-366, RS-449, V.35, and a Category A coaxial
interface.
Figure 2 shows some of the ways modules can be...