ATT DEFINITY Communications System Generic 3 Instructions Manual

Call Detail Recording (CDR)
Issue  3   March 1996
3-357
Table 3-40. CDR Data Format — Int-Direct
ASCII Character 
Position Data Field Description
01 Date of Month - (tens)
02 Date of Month - (units)
03 Month - (tens)
04 Month - (units)
05 Year  - (tens)
06 Year - (units)
07 Space
08 Time Hour - (tens)
09 Time Hour - (units)
10 Time Minute - (tens)
11 Time Minute - (units)
12 Space
13 Duration Hour
14 Duration Minute - (tens)
15 Duration Minute - (units)
16 Duration Minute - (tenths)
17 Space
18 Condition...

Feature Descriptions
3-358Issue  3   March 1996 
1. Data is right justified and padded with blanks (spaces).
2. 27-29 are blank
3. Data is right justified and padded with zeros
68-72 PPM Count1
73 Space
74-75 Incoming Circuit ID
3
76 Space
77-78 Outgoing Circuit ID
3
79 Carriage Return
80 Line Feed
Table 3-41. CDR Data Format — Int-ISDN
ASCII Character 
Position Data Field Description
01 Time - Hours (tens)
02 Time - Hours (units)
03 Time - Minutes (tens)
04 Time - Minutes (units)
05 Space
06 Duration -...

Call Detail Recording (CDR)
Issue  3   March 1996
3-359
12 Space
13-16 Access Code dialed
1
17 Space
18-21 Access Code used
1
22 Space
23-37 Dialed Number
1
38 Space
39-48 Calling Number
1
49 Space
50-64 Account Code
1
65 Space
66-72 Authorization Cod e
1
73 Space
74 Line Feed
75 Space
76 FRL
77 Space
78 Incoming Cir ID (hundreds)
79 Incoming Cir ID (tens)
80 Incoming Cir ID (units)
81 Space
82 Outgoing Cir ID (hundreds)
83 Outgoing Cir ID (tens)
84 Outgoing Cir ID (units)
85 Space
86 Feature Flag
87...

Feature Descriptions
3-360Issue  3   March 1996 
89 Attendant Console (2nd digit)
90 Space
91 Inc Trk A cc Code (1st d i git)
1
92 Inc Trk A cc Code (2nd digit)
93 Inc Trk A cc Code (3rd digit)
94 Inc Trk A cc Code (4th d igit)
95 Space
96 Node Number (1st digit)
1
97 Node Number (2nd digit)
98 Space
99 INS (1st digit)
1
100 INS (2nd digit)
101 INS (3rd digit)
102 Space
103 IXC (1st digit)
1
104 IXC (2nd digit)
105 IXC (3rd digit)
106 IXC (4th digit)
107 Space
108 BCC
109 Space
110   MA-UUI
111 Space
112...

Call Detail Recording (CDR)
Issue  3   March 1996
3-361
Call Detail Record Fields
The following list describes the CDR data collected for each call and the number 
of digits in each field. All information is right adjusted in the respective field, 
unless otherwise indicated.
— The CDR out put for intraswitch CDR record s contain only the time, 
duration, condition code, dialed number, calling number, the character 
‘‘W’’ for a Wideband call, the bandwidth values 1 through 31 for Bandwidth 
calls (only...

Feature Descriptions
3-362Issue  3   March 1996 
nAccess Code Dialed (up to three or four digits [24-word formats ])
NOTE:
The field name for Customized CDR Record s for G3rV1, G3V2, and 
later releases is ‘‘code-dial’’; the default length = 4.
This field is used only for outgoing calls. This field can be the ARS access 
code, AAR access code, or the access code of a specific trunk group. 
This field does not exist in the ISDN 18-word record  formats. In G3r, this 
field is also used to record the X.25...

Call Detail Recording (CDR)
Issue  3   March 1996
3-363
Account code dialing can be optional or mandatory (forced).  Forced 
account code entry is set on a per-COR basis or per system.  If the trunk 
group used for a call requires an account code and one is not dialed, the 
call is denied. Forced account code entry can also be assigned for all toll 
calls. Service calls, directory assistance calls, and WATS calls are 
excluded.
If the ISDN LSU 18-word format is used, a maximum of 12 account code 
digits...

Feature Descriptions
3-364Issue  3   March 1996 
— 3 = Mode 3 (64 k b ps data for LAPD protocol)
— 4 = Mode 0 (64 k b ps data clear)
— w = Wideband
Intra-switch CDR only outputs a value in this field for Wideband 
calls only and, in this case, the value is ‘‘w.’’
nBandwidth (two digits)(24-word record  and customized record for G3V2 
and later releases only)
NOTE:
The field name for Customized CDR Record s for G3rV1, G3v2, and 
later releases is “bandwidth.”
— Used to capture the bandwidth of the...

Call Detail Recording (CDR)
Issue  3   March 1996
3-365
If the Calling Number is related to SID/ANI, this field contains SID/ANI 
information; otherwise, this field contains TAC information. If an outgoing 
call type, this field will contain the calling extension. This field  is specified 
on the CDR customized record.
nCarriage Return (one character)
NOTE:
The field name for Customized CDR Record s for G3rV1, G3V2, and 
later releases is ‘‘return.’’
The ASCII carriage return character followed by a line...

Feature Descriptions
3-366Issue  3   March 1996 
Table 3-43. Condition Codes
 Condition Codes Description
0 Identifies an intraswitch call (a call that originates and terminates 
on the switch).
1 Identifies an attendant-handled call or an attendant-assisted call 
(except conference calls).
4 Identifies an extremely long call (10 hours or more) or an 
extremely high message count TSC (9999 messages or more). 
On a call exc eeding 10 hours, a call record with this condition 
code and a duration entry of 9...