ATT DEFINITY Communications System Generic 3 Instructions Manual

System Hardware and Software Capacity Limits
Issue  3   March 1996
A-81
1. Only EPNs  in  G3r  can  be DS1-remote EPNs.
2. Small systems refer to the 2-carrier cabinet systems no longer sold to new customers.
3. MCC includes the Medium Cabinet.
4. The number of appearances is the sum of p rimary and bridged appearances; at most 10 c an be
primary. A maximum of 54 administrable buttons are supported for the 7434D terminal — 34 b uttons
in the basic terminal and 20 additional buttons in the coverage...

System Parameters
A-82Issue  3   Marc h 1996 
1. All references to Hosp itality Parameter Reduction on the Customer O ption form have b een removed
from the Cap acities Tables.
2. The maximum number of users per coverage path is equal to the number of extensions.
Table A-5. Maximum System Parameters for G3V4 Release 3.0 — continued
ITEMG3vsV4 
ABP/PBP G3siV4 G3siV4 
+m G3rV4
Call Coverage
Coverage Answer Groups (CAG) 30 30 200 750
Coverage Paths
1150 150 60 0 7, 50 0
Coverage Paths  Including in Call...

System Hardware and Software Capacity Limits
Issue  3   March 1996
A-83
1. Measured limits depend on the CMS release used.
2. Proprietary, exists in G3V3 only.
3. Simultaneous 3-way Conference Call = (483 / 3)* number PNs.
4. Simultaneous 6-way Conference Call = (483 / 6)* number PNs.
Table A-5. Maximum System Parameters for G3V4 Release 3.0 — continued
ITEMG3vsV4 
ABP/PBP G3siV4 G3siV4
 +m G3rV4
Call Vectoring
Maximum Skills a Call Can Simultaneously Queue to NA/3 3 3 3
Prio rit y Le vels NA /4 4 4 4...

System Parameters
A-84Issue  3   Marc h 1996 
1. Login IDs count against the “Extensions”  switch  capacity.
2. These numbers are Uniform Dialing  Plan (UDP) entries.
3. The Integrated Directory Entries = Stations + Attendant Consoles.
4. Used  for PCOL g roups, common shared extensions, ac cess endpoints, administered TSCs, c ode
calling IDs, LDNs, hunt groups, announcements, and TEGs.
5. The Number of Names =  number of stations +  attendant c onsoles +  trunk g roups + digital data
endpoints +...

System Hardware and Software Capacity Limits
Issue  3   March 1996
A-85
1. All references to Hosp itality Parameter Reduction on the Customer Option form have been removed
from the Cap acities Tables.
Table A-5. Maximum System Parameters for G3V4 Release 3.0 — continued
ITEMG3vsV4 
ABP/PBP G3siV4 G3siV4 
+m G3rV4
Dial Plan (Continued)
Trunk Dial Access Codes
Number of Ac cess Codes 49/65 65 317 884
Number of Digits 1-4 1-4 1-4 1-4
Do Not Disturb (DND)
DND Requests per System 400 400 2,400 25,000...

System Parameters
A-86Issue  3   Marc h 1996 
1. The Last Number Dialed Entries = Stations + Digital Data Endpoints + Attendant Consoles.
2. Leave Word Calling is available in the ABP only if the Voice Mail Option is purchased.
Table A-5. Maximum System Parameters for G3V4 Release 3.0 — continued
ITEMG3vsV4 
ABP/PBP G3siV4 G3siV4
 +m G3rV4
Intercom Translation Table (ICOM)
Aut om at i c /M an ua l a n d  Dia l
ICOM groups per system 10 10 32 256
Au to/ Ma nu al 10 10 32 25 6
Dial 10 10 32 256
Members per...

System Hardware and Software Capacity Limits
Issue  3   March 1996
A-87
1. The actual limit in the software is 63, but due to p erformance c onsiderations the recommended
number of DCS Nodes is 20.
2. These are node number ad dresses.
3. Only p ort slots are included in this count. For example, there are 100 p ort slots per MCC EPN cabinet.
One slot in the c abinet is already d edicated for the Tone/Clock board. Other service c ircuits may b e
required that would further reduce the number of port slots...

System Parameters
A-88Issue  3   Marc h 1996 
1.  The G3r has been resized to 4000 q ueue slots for the 10 boards maximum (only 1,000 is needed for one
board), since common pool architecture requires a greater number of total queue slots.
Table A-5. Maximum System Parameters for G3V4 Release 3.0 — continued
ITEMG3vsV4 
ABP/PBP G3siV4 G3siV4 
+m G3rV4
Port Circuit Pack Slots (Continued)
Per Processor Port  Network (PPN)
MCC Standard ReliabilityN//A N/A 89 80
SCC S ta nda rd Rel ia b i lit y NA N/A 64 NA...

System Hardware and Software Capacity Limits
Issue  3   March 1996
A-89
1. 241 simultaneous circuit-switched calls per port network, exc ept for G3vs and G3si with 180 and G3r
with 7,712 (limited  by number of call records sup ported).
2. G3V4 uses TN744 Call Classifier for b asic TTR usage as well as call p rompting/call c lassification/MFC.
Also, the TN2182 Tone/Clock/Detector is used for multiple tone detection functions. The number of
TN748, TN420, or TN744 boards is limited only by the number of...

System Parameters
A-90Issue  3   Marc h 1996 
1. Only one Processor Interface (PI) c ircuit pack is sup ported in G3vs (CSCC) and G3s (ESCC)
configurations, therefore a total of 4  physical links (used for BX.25 or PRI) are available. PRI interface
via the PI is not available in Germany. PRI interface via the Packet Controller is used.
2. PRI interface via the Packet Controller is not available on G3vs. Therefore, PRI is not available on G3vs
in Germany. Other Countries must use the PI when they have the...