ATT DEFINITY Communications System Generic 3 Instructions Manual

Names Re gistration
Issue  3   March 1996
3-917
Names Registration
Feature Availability
This feature is available with all Generic 3 releases.
Description
Automatically sends a guest’s name and room extension from the PMS to the 
switch at Check-In, and automatically removes this information at Check-Out. In 
a d dition, the guest’s call coverage path (for example, a coverage path that 
terminates at a voice mail adjunct or a hotel operator) will also be sent from the 
PMS to the Switch during Check-In,...

Feature Descriptions
3-918Issue  3   March 1996 
The Check-In and Check-Out functions are d isc ussed in the PMS description 
elsewhere in this document.
Guest Information Input/Change
Guest Information Input/Change, allows  g uest information (name or coverage 
path) to be entered or altered subsequent to the check-in message.  Hotel 
personnel can change this information at the PMS and it is automatically sent to 
the switch.
The Guest Information In put/Change function  is used in those situations...

Names Re gistration
Issue  3   March 1996
3-919
Call Coverage
Both Names Re gistration and Guest Information Input/Change messages contain 
call coverage path numbers. These numb ers are not displayed but are used to 
configure the appropriate call coverage arrangements for guest phones.  Path 
arrangements for voice mail, text messages, any available coverage point, or no 
coverage at all is sent by the PMS for automatic call coverage reconfiguration. 
The Call Coverage paths are established at the...

Feature Descriptions
3-920Issue  3   March 1996 
nCOS 
If an extension has Client Room COS, the save translation operation clears 
the station name and sets the coverage path to the Default Coverage Path 
for Client Room when stored on tape.  The existing information in memory 
is not affected.  However, if the translations are read in, existing 
extensions will be affected until a database swap synchronizes the switch 
and PMS.
nInterface
During a Room Change/Room Swap, the name originally associated...

Names Re gistration
Issue  3   March 1996
3-921
Hardware and Software Requirements
A PMS, if used, can be connected through an MPDM and port on a Digital Line 
circuit pack or through an ADU and a port on a Data Line circuit pack. A journal 
printer can be used and also requires an MPDM and a p ort on a Digital Line 
circuit pack or an ADU and a port on a Data Line circuit pack.
O ptional Hospitality Services software is required to provide the PMS Interface 
feature. 

Feature Descriptions
3-922Issue  3   March 1996 
Network Access — Private
Feature Availability
This feature is available with all Generic 3 releases.
Description
Allows calls to be connected to the following types of networks:
nCommon Control Switching Arrangement (CCSA)
nDistributed Communications Systems (DCS)
nElectronic Tandem Network (ETN)
nEnhanced Distributed Communications Systems (EDCS)
nEnhanced Private Switched Communications Service (EPSCS )  
(G3i-Global, G3V2, and later releases)
nTandem...

Network Access — Private
Issue  3   March 1996
3-923
Interactions
nAttendant Call Waiting
G3i-Global, G3V2, and later releases provide Call Waiting via Italian TGU/ 
TGE (main/satellite) trunks. Call Waiting is also provided in Italy and all 
other countries through DCS.
nAttendant Intrusion
G3i-Global, G3V2, and later releases provide Attendant Intrusion on 
Satellite PBX stations via TGU/TGE trunks.  Attendant Intrusion is also 
provided through DCS.
Administration
Private Network Access is...

Feature Descriptions
3-924Issue  3   March 1996 
Network Access — Public
Feature Availability
This feature is available with all Generic 3 releases.
Description
Provides voice terminal users and attendants with access to and from the p u blic 
network.
Outgoing access is provided to the following:
nCOs
nFX offices (distant COs)
nWATS offices (COs receiving toll-free calls)
Incoming access is provided from the following:
nLocal COs
nFX offices
n800 Service office (COs sending toll-free calls)...

Network Access — Public
Issue  3   March 1996
3-925
Hardware and Software Requirements
Requires one p ort on a TN747B CO Trunk circuit pack or TN767 DS1  circuit 
pack (TN464B/C/D support A-law) for each trunk assigned. No additional 
software is required. 

Feature Descriptions
3-926Issue  3   March 1996 
Night Service — Hunt Group
Feature Availability
This feature is available with all Generic 3 releases.
Description
Hunt Group Night Service allows an attendant or a split supervisor to individually 
assign a hunt group or split to the night service mode. All calls terminating on the 
hunt group or sp lit  in the night service mode are redirected to the hunt group or 
split’s designated Night Service Extension (NSE).
Considerations
The Hunt Group Night...