ATT DEFINITY Communications System Generic 3 Instructions Manual

Malicious Call Trace (MCT)
Issue  3   March 1996
3-877
nBrid ged Appearance — Temporary
If a covering user has activated a trace, the original called party may 
bridge on to the call provided the normal rules governing such.
nBrid ged Call Ap pearance
If the user of a primary extension is the Recipient of the indication call, 
then a station with a bridged appearance of this extension may bridge 
onto the call according to the normal rules g overning such. For an 
MCT-Activate button push, if the...

Feature Descriptions
3-878Issue  3   March 1996 
nConference
The conference operation can be used by an MC-recipient to temporarily 
place a malicious caller on hold. The MC-recipient may choose to d o this 
in order for MCT-Activate to generate a stimulus via a FAC.
This is done by the user initiating the conference operation, receiving the 
second dialtone, entering the MCT-Ac tivate FAC then halting the 
remainder of the conference operation and simply returning to the 
malicious caller’s appearance....

Malicious Call Trace (MCT)
Issue  3   March 1996
3-879
nPosition Busy
A Position  Busy  activation  will be attemp ted by the switch for any 
attendant in the role of MC-recipient activating PB. The success or failure 
of the attempt will be determined by the normal rules governing a Position 
Busy activation.
When this station generates an MCT-Deactivate stimulus, the state of the 
Position Busy feature for this set will be returned to whatever the state was 
prior to the MCT-Control stimulus.
nPriority...

Feature Descriptions
3-880Issue  3   March 1996 
Administration
The following describes administration.
nCOR Administration
This provides a user access to MCT features.
nFAC Ad ministration
This provides Feature Access Codes with which MCT-Activate and 
MCT-Deactivate may be performed.
nStation Administration
This provides a user access to the MCT-Activate and/or MCT-Control 
buttons.
nSystem Parameters Ad ministration
This determines a p plication of a tone audible to all parties during the 
recording...

Malicious Call Trace (MCT)
Issue  3   March 1996
3-881
nCapacities
Number of Malicious Calls being Traced:
— Up to 16 MCTs may be active in the system at any given time. This 
maximum includes currently controlled calls and calls in queue for 
being controlled.
Number of Voice Recorders:
— Only one MCT Voice Re corder may be used for each malicious c all 
being controlled or queued for being controlled. (This also implies 
that the system maximum for MCT Voice Recorders is 16 since that 
is the maximum...

Feature Descriptions
3-882Issue  3   March 1996 
Manual Message Waiting
Feature Availability
This feature is available with all Generic 3 releases.
Description
Enables multiap p earance voice terminal users, by pressing a designated button 
on their own terminals, to light the status lamp associated with the Manual 
Message Waiting button at another multiappearance voice terminal. Activating 
the feature causes the lamp to light on both the originating and receiving voice 
terminals. Either terminal user...

Manual Originating Line Service
Issue  3   March 1996
3-883
Manual Originating Line Service
Feature Availability
This feature is available with all Generic 3 releases.
Description
Connects single-line voice terminal users to the attendant automatically when the 
user lifts the handset. The attendant code is stored in an Ab breviated Dialing list.  
When the Manual Originating Line Service voice terminal user lifts the handset, 
the system automatically routes the call to the attendant using the Hot Line...

Feature Descriptions
3-884Issue  3   March 1996 
Manual Signaling
Feature Availability
This feature is available with all Generic 3 releases.
Description
Allows a voice terminal user to signal another voice terminal user. The receiving 
voice terminal user hears a two-second burst of tone.
The signal is sent each time the b utton is pressed.  If the receiving voice terminal 
is already being alerted with an incoming call, Manual Signaling  is  denied.  The 
status lamp associated with the Manual...

MERLIN® /System 25 Voice Terminal Su p port  —  731xH 
Series
Issue  3   March 1996
3-885
MERLIN®/System 25 Voice Terminal
Support — 731xH Series
Feature Availability
This feature is available with all Generic 3 releases except G3i-Global and 
G3rV1.
Description
The feature allows MERLIN/System 25 customers to reuse the 7309H and  the 
following 731xH series ATL (hybrid) voice terminals with the DEFI NI TY 
Communications System  G3vsV1/G3sV1, G3iV1, G3V2, and later releases:
n7313H
n7314H
n7315H (with...

Feature Descriptions
3-886Issue  3   March 1996 
to this station (for examp le, using call forward ing or call coverage). Scroll to 
the second line of the disp lay to view the name of the calling party.
The 7315H and 7317H voice terminals display information differently from other 
voice terminal displays. For example, the 7315H and 7317H d o not identify which 
call appearance is in use. Another example is that reason codes for calls direct 
or redirected to the station are restricte d to one character...