ATT DEFINITY Communications System Generic 3, Installation, Administration, And Maintenance Of CallVisor, ASAI Instructions Manual

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Task 11: Perform Initial DEFINITY LAN
Gateway Administration
bbbbbbbbbbbbbbb
This task is required for all installation scenarios.  There are two parts to this
task:
Task 11A: Set the DEFINITY LAN Gateway Clock
Task 11B: Assign the DEFINITY LAN Gateway Machine ID (Optional)
Task 11A: Set the DEFINITY LAN Gateway
Clock
1. At the login prompt, enter craft. The system displays the Password
prompt.
2. Enter the default password for the craft...

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
3.  Brouter Administration 1.  Login/Password Administration
4.  Maintenance...
5.  Port Status/Control
6.  Exit
This line is used to provide abbreviated help on the currently selected field.
ENTERMain Menu
2.  TCP/IP Administration...
EXIT REFRESH Release 1.0, Issue x.y
HELP
Screen 2-4.  Main Menu
5. Select 
Maintenance and then Set System Time and Date. Follow the
instructions for the Set System Time and Date screen in Chapter 3.
Task 11B:...

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Host Name:        ______________________________
Host IP Address:  __________________
Subnet Mask:      __________________TCP/IP Administration
This Host
This line is used to provide abbreviated help on the currently selected field.
ENTER CLEAR CANCEL REFRESHHELP
Screen 2-5.  This Host
2. If a host name different from the default (definity) is desired, in the
Host Name field type the new name to be assigned to this DEFINITY LAN
Gateway...

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
4410 for a 4410 or 5410 terminal; enter 4410 also for a 610/615
BCT or a PC with a 4410 emulation package.
4425 for a 4425 or 5425 terminal
5420 for a 5420 or 4415 terminal
g3-ma for a G3-MA
vt220 (or other terminal listed in Appendix B)
4. The system displays the DEFINITY LAN Gateway Main Menu.
3.  Brouter Administration 1.  Login/Password Administration
4.  Maintenance...
5.  Port Status/Control
6.  Exit
This line is used to provide...

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Task 13: Test LAN/Client Connectivity
(Optional)
bbbbbbbbbbbbbbb
Task 13 is performed to test the TCP/IP connection to ensure that connectivity
exists between the DEFINITY LAN Gateway and the customers LAN, as well as
between the DEFINITY LAN Gateway and a client.  This testing should be done
jointly with the customers LAN administrator.
NOTE:
Connectivity to the DEFINITY LAN Gateway system from a subscriber PC
is not part of the acceptance...

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Host Name or IP Address: ____________________Maintenance
This line is used to provide abbreviated help on the currently selected field.
ENTER CLEAR CANCEL REFRESHHELP Ping Host
Packet count:
Packet size:___
___
Screen 2-7.  Ping Host Screen
b. Fill in the Host Name or IP Address of the DEFINITY LAN Gateway
system assembly. This example uses 
192.168.25.10 as the IP
Address.  Also enter a packet count of 20 (recommended), and a
packet size of...

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Output similar to the following will appear:
The messages which follow are the result of your last request.
At the  : prompt press return to continue.
72 bytes from 192.168.25.10: icmp_seq*0, time=0. xx
72 bytes from 192.168.25.10: icmp_seq*1, time=0. xx
72 bytes from 192.168.25.10: icmp_seq*2, time=0. xx
72 bytes from 192.168.25.10: icmp_seq*3, time=0. xx
72 bytes from 192.168.25.10: icmp_seq*4, time=0. xx
72 bytes from 192.168.25.10:...

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
d. Now access the Ping Host screen again, as you did in step 2a,
to test connectivity to the client.  Use the same data, except in this
example, enter 
192.168.25.20 as the IP address (if you choose to
enter IP Address instead of Name).
In this step, the DEFINITY LAN Gateway system assembly is
sending packet messages (20 in this example) to the client, and
listening for responses.
Output similar to the following will appear:
The messages...

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
The results displayed in the packet loss field (z) will range from 0%
to 100% The number of packets that are ``lost (need to be
transmitted) will vary from LAN to LAN.  For some LANs, 0%
packet loss is normal, while for others, 10% or 20% loss is normal.
The degree of packet transmission over a LAN depends upon the
distance between machines, the number of users on the LAN, and
the number of machines on the LAN.
Refer to the sections that...

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Task 14: Register/Back Up the Systembbbbbbbbbbbbbbb
The final three steps the AT&T service technician performs to install the
DEFINITY LAN Gateway system are as follows:
Task 14A: Register the System
Task 14B: Deactivate/Activate Logins
Task 14C: Perform a Backup of the Removable Medium
Task 14A: Register the System
AT&T Services personnel should call the TSC at 1-800-248-1111 to register the
system.  Expect the TSC to collect information...