ATT DEFINITY Communications System Generic 3, Installation, Administration, And Maintenance Of CallVisor, ASAI Instructions Manual

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Use this screen as follows:
To delete a login:
1. Press 
Tab or use the arrow keys to move to the login you want to
delete, and then press 
DELETE .
2. The following prompt appears: 
Are You Sure? (Y/N?). Type Y
and press Return . The screen will reappear, minus the deleted
login.
If you type 
N and press Return , the cursor reappears at the
beginning of the line, and the login is not deleted.
3. Repeat steps 1 and 2 until you have...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Add Logins
Note 1:
Only the primary administrator login is allowed to add logins and
passwords.
Note 2:
If the primary administrator attempts to add a login that already exists, an
error message is displayed.
Login/Password Administration
Add Logins
Login: _____________
This line is used to provide abbreviated help on the currently selected field.
ENTER CLEAR CANCEL REFRESHHELP
Screen 3-3.  Add Logins
When you add a login using this...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Use this screen as follows:
1. Type the login you want to add to the system.
2. Press 
ENTER to submit the login.
3. The following prompt appears: 
New password:
Type the password to be associated with the login and press
Return .
Passwords follow normal UNIXÒnaming conventions.  These are:
Each password must have at least 6 characters.
Each password must contain at least two alphabetic
characters and at least 1 numeric or special...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Change Passwords
NOTE:
Any user may change his or her password.  The primary administrator login
can change any users password.
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
Old Password
New Password
Re-Type New Password
Some test
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
alkjljklkjlkjlkjljlkj lkjljklkjlkjlkjljlkj
lkjljklkjlkjlkjljlkj lkjljklkjlkjlkjljlkj
lkjljklkjlkjlkjljlkj
lkjljklkjlkjlkjljlkj
Screen 3-4.  Change Passwords
This...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Field Name Description
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Old Password The existing password.  Appears on screen only
for logins other than the primary administrator.
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
New Password The password you want to change the existing
password to c c c
c
c
c c c
Use this screen as...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
TCP/IP Administration (Main Menu)bbbbbbbbbbbbbbb
1.  This Host
2.  Local Host Table
3.  Network Routing Information...
4.  ExitTCP/IP Administration
This line is used to provide abbreviated help on the currently selected field.
ENTER EXIT REFRESHHELP
Screen 3-5.  TCP/IP Administration
Menu Item Descriptionbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
This Host
Host Name:        ______________________________
Host IP Address:  __________________
Subnet Mask:      __________________TCP/IP Administration
This Host
This line is used to provide abbreviated help on the currently selected field.
ENTER CLEAR CANCEL REFRESHHELP
Screen 3-6.  This Host
This screen is used to assign a host name to the Multi-Function Board.
NOTE:
For changes to be implemented, you must reboot the system.  See...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Field Name Field Description O/R*bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Subnet Mask Subnet Mask used by this circuit pack. Change only if
alternate network subnetting is desired. Value = x.x.x.x,
where x is a number between 0 and 255. Default = blank.
Maximum field size = 15 characters.O
c c c
c
c c c
c c c
c
c c c...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Local Host Table
TCP/IP Administration
Local Host Table
IP Address
________________
________________
________________
________________
________________
________________
________________
________________
________________
________________
________________Host Name Aliases
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Use this screen as follows:
Press NXTPG or PRVPG to access other hosts.
To delete a host entry:
1. Press 
Tab or use the arrow keys to move the cursor to the line you want to
delete, and then press 
DELETE .
2. The following prompt appears: 
Are You Sure? (Y/N). Type Y and press
Return . When the screen reappears, the host will not appear.
If you type 
N and press Return , the cursor reappears at the beginning of the
line and the...