ATT DEFINITY Communications System Generic 3, Installation, Administration, And Maintenance Of CallVisor, ASAI Instructions Manual

Installationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
3. Rotate the lever on the tape drive to the open (facing down) position (if it
is not already open).
4. Referring to Figure 2-13, hold the cartridge with the tape side down and
the arrow pointing toward the drive (away from you), then insert the
cartridge into the drive.
bbbbbbbbbbbbbbbbbbbbb
Write Protect tab
Tape side downArrow indicating
direction to
insert tape
This
side
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Figure 2-13.  Tape Cartridge...

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
System Administration
3
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
This chapter presents the screens used for administering and maintaining the
system.  Sample configurations are located in Appendix E.
Getting Startedbbbbbbbb
This section details information about the screens, procedures for logging on,
and procedures for moving among screens.
Screen/System Conventionsbbbbbbbbbbbbbbb
Screen and system conventions are listed below.
Not all function keys...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
When the prompt Are You Sure? appears, the user must press Return
after entering Y or N.
Logging Onbbbbbbbbbbbbbbb
1. At the login prompt, enter your login and press Return .
The password prompt 
(PASSWORD:) appears.
NOTE:
If a login prompt is not displayed, press Return a few times.  If it still
does not appear, see ``Bringing Up the System in Appendix D.
2. Enter your password and press 
Return . You are prompted for your
terminal...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Moving Around the Systembbbbbbbb
The methods for moving around the DEFINITY LAN Gateway screens are as
follows:
1. You can use the function keys on the bottom of the screen ( 
NXTPG ,
PRVPG , NXTDAY , and PRVDAY ) to move around screens, as applicable.
NOTE:
An alternate method of using function keys is to press the Ctrl key,
and while holding it down, press 
F . Then release both keys and
press the number corresponding to the...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Using the Function Keysbbbbbbbbbbbbbbb
Table 3-1.  Function Keysbbbbbbbbbbbbbbbbbbbbb
Pressing this Key: Does this:bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbc c c
ADDAppears on two TCP/IP Administration screens:
1. On Local Host Table screen, provides access to Add
Hosts screen.
2. On Network Routing Table screen, provides...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Pressing this Key: Does this:bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
MSGPEROn Port Status/Control screen, accesses Message Collection
Period screen.
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
NXTDAYOn System...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
List of Screensbbbbbbbb
A list of the system screens and the pages on which they are located in this
chapter appears below.  This list also depicts the screen hierarchy.
Main Menu ZZZ
Login/Password Administration ZZZ
Add Logins ZZZ
Change Passwords ZZZ
TCP/IP Administration (Main Menu) ZZZ
This Host ZZZ
Local Host Table ZZZ
Add Host ZZZ
Network Routing Information (Main Menu) ZZZ
Network Routing Daemon ZZZ
Default Gateway ZZZ...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Field Names and Descriptionsbbbbbbbb
Main Menubbbbbbbbbbbbbbb
3.  Brouter Administration 1.  Login/Password Administration
4.  Maintenance...
5.  Port Status/Control
6.  Exit
This line is used to provide abbreviated help on the currently selected field.
ENTERMain Menu
2.  TCP/IP Administration...
EXIT REFRESH Release 1.0, Issue x.y
HELP
Screen 3-1.  Main Menu
Menu Item...

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Menu Item Description
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Maintenance... Provides access to maintenance functions: formatting media,
saving and restoring configuration data, setting time and date,
resetting the system, viewing system/security logs, and
pinging other hosts....

System Administrationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Login/Password Administrationbbbbbbbbbbbbbbb
Login/Password Administration
NOTE:
Only the primary administrator is allowed to add or delete logins.  (The
ADD and DELETE keys only appear for the primary administrator login.)
Also, only the primary administrator login can change a password for any
login.
This line is used to provide abbreviated help on the currently selected field.Login/Password Administration
Login
________________...