Home > ATT > Communications System > ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

Here you can view all the pages of manual ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual. The ATT manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 231

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 17-153
Cases 5-8 are similar to Cases 1 through 4 respectively. The only difference is that the Service/Feature
field is changed to other. The remaining fields repeat the same conditions on a case-by-case basis.
Therefore, cases 5-8 may serve to receive other incoming Services/Features (for example, SDN or any of
the Switched Digital Services).
Example Screen Entries for Cases 1-8
l     Called Number field is not specified (that is, left...

Page 232

7-154ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 1
Many other scenarios may be developed for applying a plan. Various reasons may be used. Figure 7-
82, Trunk Group Screen, Page 3 (ISDN-PRI), depicts this procedure.½
½
CBC TRUNK GROUP USAGE ALLOCATIONPage 3 of 11
Usage Allocation Plan 1Usage Allocation Plan 2
UsageAllocation Plan 3
Service/Feature Min# Max#Service/Feature Min# Max# Service/Feature Min# Max#
Chan ChanChan ChanChan Chan
Figure 7-82. Trunk Group Screen, Page 3...

Page 233

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 17-155
Max# ChanThis field established the maximum number of trunk members that can be used by the
associated Service/Feature application at any one time (for example, MEGACOM 800).
An Example Application for Usage Allocation Plans
A given ISDN-PRI trunk group has the Service Type field translated cbc and has 23 trunk members.
And if:
1.
1.
2.At any given time, no more than 15 members (that is, Max# Chan = 15) will be used for the...

Page 234

7-156ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 1½
CBC TRUNK GROUP USAGE ALLOCATION PLAN ASSIGNMENT SCHEDULEPage 4 of 11
Usage Method:
Fixed? yAllocation Plan Number: 1
Scheduled? n
Usage Allocation Plan Activation Schedule:
ActPlan ActPlan ActPlan ActPlan ActPlan ActPlanTime #Time #Time #
Time #Time #Time #
SunMonTueWedThuFri
Sat
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ ____ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___...

Page 235

Plan #
ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 17-157
Act TimeSpecifies the time that the associated usage allocation plan will become effective.
Time must be specified in 24-hr format. Permitted entries are 00:00 through 23:59.
NOTE: Each day of the week must have at least one entry, but may have as
many as six transition times. A transition time is defined as the time when
another plan becomes effective. A new or different plan will not effect existing
calls, but will effect...

Page 236

7-158ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 1
PortThis field associates each trunk group member to a particular network (1 or 2), carrier
(A-E), slot (01-20), and circuit (01-24). To keep things simple, try to match trunk
group member assignments with B-channel assignments (for example, trunk group
member 1 on channel 1).
Typically, this entry is a 7-digit telephone number. However, another candidate would
be the 10-digit trunk circuit identification number (available from the...

Page 237

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 17-159
Permitted entries are single digit numbers less than or equal to the number
administered in the Page Length field of the 
DIAL PLAN RECORD screen. For example, if
the Page Length field is translated five (meaning a five digit numbering plan), then this
field may contain the number 1, 2, 3, 4, or 5. If the Page Length field is translated
four (meaning a four digit numbering plan), then this field may contain the number 1,
2, 3, or...

Page 238

7-160ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 1½
SID PREFIX TABLEPage 1 of 5
ExtLen55
ExtCode31
41
SIDPrefix
2012353000
20123Ext
Len
ExtCodeSIDPrefixExt
LenExt
CodeSIDPrefix
Figure 7-86. SID Prefix Table Screen, Sample Application
Routing Patterns — ISDN-PRI Applications
NOTE: The 
ROUTING PATTERN screen only relates to outgoing calls; page 2 of the TRUNK GROUP screen
only relates to incoming calls.
A routing pattern is a set of trunk groups that carry calls to a particular...

Page 239

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 17-161½
ROUTING PATTERNSPage 1 of 1
Pattern Number:
—
Pattern Assignments (Enter Up To 6)
Grp.FRL NPAPrefixToll     No. DelInsertedIXCNo.MarkListDigitsDigits1._2._3._4._5._6._
BCC ValueService/Feature
01234
1._____Band:2._____Band:3._____Band:4.Band:_____5._____Band:6._____Band:
Figure 7-87. Routing Patterns Screen
PatternPermitted entries are numbers within the range 1 through 254. The appropriate number
FRL
NPA Numbermust come from the...

Page 240

7-162ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 1
Prefix Mark
This field is only used for public network (ARS) applications.
The Prefix Mark relates to the ARS Prefix 1 Required? field on the 
DIAL PLAN RECORD
screen. If the ARS Prefix 1 Required? field is translated y, then (for certain type of
calls) it may be necessary to transmit the one along with the dialed digits. The Prefix
Mark field permits four different entries (numbers) for administering this capability.
Field encodes...
Start reading ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

Related Manuals for ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

All ATT manuals